• 제목/요약/키워드: Isolation Improvement

검색결과 253건 처리시간 0.028초

멀티 오리피스를 이용한 에어스프링 동특성 개선에 관한 연구 (The Study on the improvement of dynamic characteristics with multi-orifice in airspring)

  • 김인수;황성호;한문성;고철수
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.97-103
    • /
    • 2002
  • Vibration isolation technology using an air spring and laminated rubber bearing is widely used because it has excellent vibration isolation characteristics. In the part of that, we usually make use of the self-damped air suing. It is occupied two chambers, restrictor, diaphragm and load plate. Two chambers contain compressed air and the volume of chambers and the area of load plate give a definition of stiffness and load. The restrictor and the volume ratio of two chambers give a definition of damping ratio. The conventional model of restrictor is made of one orifice and it causes turbulent flow in the orifice at the region of large deflection. The stillness of air suing is larger and the damping is lower in the region of large deflection. In the multi-orifice case, the stiffness is similar to air spring with one orifice but damping ratio is larger than conventional air spring. And damping ratio is smaller than conventional air suing in small deflection region. Deflection is small in the region of high frequency so small damping is better than large damping. As a result, we can reduce the storage stiffness of air suing in the wide region of deflection and increase the damping ratio in the region of large deflection. After this, we will try to and the relation of Reynolds Number and Flow Resistance then we are going to make another restrictor for air spring to improve damping ratio and stiffness.

  • PDF

Isolation and in vitro culture of primary cell populations derived from ovarian tissues of the rockfish, Sebastes schlegeli

  • Ryu, Jun Hyung;Kim, Hak Jun;Bae, Seung Seob;Jung, Choon Goo;Gong, Seung Pyo
    • Fisheries and Aquatic Sciences
    • /
    • 제19권2호
    • /
    • pp.9.1-9.7
    • /
    • 2016
  • This study was conducted to identify the general conditions for the isolation and in vitro culture of ovary-derived cells in rockfish (Sebastes schlegeli). The effects of three different enzymes on cell retrieval from ovarian tissues were evaluated first, and then the ovary-dissociated cells were cultured under various culture conditions, with varying basal media and culture temperatures, addition of growth factors, and/or culture types. We found that collagenase type I treatment was effective for cell isolation from ovarian tissues. From a total of 42 trials to evaluate the effects of basal media and culture temperatures on cell culture of ovary-dissociated cells, we observed that Leibovitz's L15 medium was more supportive than Dulbecco's modified Eagle's medium for culture, and the cells could grow at all three temperatures tested, 15, 20, and $25^{\circ}C$, at least up to passage 2. However, growth factor addition did not improve cell growth. Introduction of suspension culture after monolayer culture expanded the culture period significantly more than did monolayer culture alone. Our results may provide a basis for developing an in vitro system for S. schlegeli germline cell culture, which will ultimately lead to improvement of the species.

무기체계 개발간 초기 설계단계에서의 정비도 예측방안 연구 (A Study on the Maintainability Prediction in the Initial Design Phase between Weapon System Development)

  • 김영석;허장욱
    • 한국군사과학기술학회지
    • /
    • 제22권6호
    • /
    • pp.824-831
    • /
    • 2019
  • For effective development in consideration of the maintainability of the weapon system, it is necessary to understand whether the maintainability design requirements are satisfied at the early phase of development. This requires the application of an early design phase maintainability prediction process to provide opportunities for improvement. By defining the ambiguity group definition, fault isolation level, fault isolation probability, and countermeasures for faults, it was possible to predict early phase development. The MTTR of the initial design phase applying Procedure V to the artillery system was 3.46H, which is about 16 % higher than 2.98H, the MTTR using Procedure II. This is a result of system design ambiguity that has not been specified in the early phase of development.

공압제진대용 이중챔버형 공압스프링의 복소강성 모형화 (Amplitude-dependent Complex Stiffness Modeling of Dual-chamber Pneumatic Spring for Pneumatic Vibration Isolation Table)

  • 이정훈;김광준
    • 한국소음진동공학회논문집
    • /
    • 제18권1호
    • /
    • pp.110-122
    • /
    • 2008
  • Pneumatic vibration isolator typically consisting of dual-chamber pneumatic springs and a rigid table are widely employed for proper operation of precision instruments such as optical devices or nano-scale equipments owing to their low stiffness- and high damping-characteristics. As environmental vibration regulations for precision instruments become more stringent, it is required to improve further the isolation performance. In order to facilitate their design optimization or active control, a more accurate mathematical model or complex stiffness is needed. Experimental results we obtained rigorously for a dual-chamber pneumatic spring exhibit significantly amplitude dependent behavior, which cannot be described by linear models in earlier researches. In this paper, an improvement for the complex stiffness model is presented by taking two major considerations. One is to consider the amplitude dependent complex stiffness of diaphragm necessarily employed for prevention of air leakage. The other is to employ a nonlinear model for the air flow in capillary tube connecting the two pneumatic chambers. The proposed amplitude-dependent complex stiffness model which reflects dependency on both frequency and excitation amplitude is shown to be very valid by comparison with the experimental measurements. Such an accurate nonlinear model for the dual-chamber pneumatic springs would contribute to more effective design or control of vibration isolation systems.

2 차원 Si 종형 Hall 소자의 자기감도 개선 (Magnetic Sensitivity Improvement of 2-Dimensional Silicon Vertical Hall Device)

  • 류지구
    • 센서학회지
    • /
    • 제23권6호
    • /
    • pp.392-396
    • /
    • 2014
  • The 2-dimensional silicon vertical Hall devices, which are sensitive to X,Y components of the magnetic field parallel to the surface of the chip, are fabricated using a modified bipolar process. It consists of the thin p-layer at Si-$SiO_2$ interface and n-epi layer to improve the sensitivity and influence of interface effect. Experimental samples are a sensor type K with and type J without $p^+$ isolation dam adjacent to the center current electrode. The results for both type show a more high sensitivity than the former's 2-dimensional vertical Hall devices and a good linearity. The measured non-linearity is about 0.8%. The sensitivity of type J and type K are about 66 V/AT and 200 V/AT, respectively. This sensor's behavior can be explained by the similar J-FET model.

단일주거 내 거주자의 사회적 행위패턴에 대응하는 공간조절 요소 (Space Elements as the Correspondent Elements with the Social Behavior Patterns in the Housing Unit)

  • 전남일
    • 대한가정학회지
    • /
    • 제40권3호
    • /
    • pp.21-40
    • /
    • 2002
  • The aim of this interdisciplinary study is to understand the relationship between the social behavior patterns and space elements, specially micro-housing sociological point of view. It analyzed korean typical floorplans in the apartment housing, focused on the 4-criteria contact or isolation between the individual persons, communication between the generations, hierarchy of the gender and socialization with neighbourhood. It determinate concrete space elements involved correspondent factors with users' social behavior. By reviewing those factors found, it is suggested also the planning concept, that response users' social orientation. As the practical alternatives, some prototypes have been developed not only for improvement of housing plans, but also for resonable housing supply and sustainable usage.

Isolation and Identification of a Photosynthetic Bacterium Containing a High Content of Coenzyme Q10

  • Jeong, Soo-Kyoung;Ahn, Soon-Cheol;Kong, In-Soo;Kim, Joong-Kyun
    • Fisheries and Aquatic Sciences
    • /
    • 제11권3호
    • /
    • pp.172-176
    • /
    • 2008
  • To develop a potent strain for the production of coenzyme $Q_{10}$, a photosynthetic bacterium was isolated from silt of the Nakdong River in Korea. Using l6S-rDNA sequence analysis, the isolated strain was identified as Rhodobacter sphaeroides. A stable improvement in its $CoQ_{10}$ content was achieved by chemical mutation, upon which the content of $CoQ_{10}$(2.94 mg/g dry cell) was increased by approximately 1.9-fold, comparable to that of R. sphaeroides reported in other studies. The isolate is a potentially valuable microorganism for mass production of $CoQ_{10}$, and may provide an appropriate model for further study of economical mass production.

FxLMS 알고리즘을 적용한 하이브리드 미소진동 절연장치의 절연성능 평가 (Performance Evaluation of Hybrid Vibration Isolator using FxLMS algorithm)

  • 이대은;박지용;한재흥
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.173-174
    • /
    • 2014
  • Vibration disturbances generated by reaction wheels may cause serious problems in high precision pointing spacecraft missions. Implementation of vibration isolator is a practical solution to meet the high pointing stability requirement placed on precision payloads. In this paper, development of hybrid vibration isolator that combines passive and active component is described. Vibration isolation performance of the developed isolator is evaluated using reaction wheel disturbance model. Hybrid isolation results obtained using FxLMS algorithm show clear improvement compared to the results obtained using only passive means.

  • PDF

Single-ended Differential RF Circuit Topologies Utilizing Complementary MOS Devices

  • Kim, Bonkee;Ilku Nam;Lee, Kwyro
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제2권1호
    • /
    • pp.7-18
    • /
    • 2002
  • Single-ended differential RF circuit topologies fully utilizing complementary characteristics of both NMOS and PMOS are proposed, which have inherent advantage of both single-ended and differential circuits. Using this concept, we propose a CCPP (Complementary CMOS parallel push-pull) amplifier which has single-ended input/output with differential amplifying characteristics, leading to more than 30 dB improvement on $IIP_2$. In addition, complementary resistive mixer is also proposed, which provides not only differential IF outputs from single-ended RF input, but much better linearity as well as isolation characteristics. Experimental results using $0.35{\;}\mu\textrm{m}$ CMOS process show that, compared with conventional NMOS resistive mixer, the proposed mixer shows 15 dB better LO-to-IF isolation, 4.6 dB better $IIP_2$, and 4.5 dB better $IIP_3$performances.

영구임대아파트 자족지원시설 수요 및 설계 연구 -인천 만수주공 7단지를 사례로- (The Study on a Residents' Demands of Support Facilities for Self-sufficiency and Design of Permanent Rental Housing -With Reference to Man-soo 7 Estate in Incheon-)

  • 박병규;김민경
    • KIEAE Journal
    • /
    • 제10권1호
    • /
    • pp.11-18
    • /
    • 2010
  • Permanent rental housing complex is subjected to both an increase in the crime rate due to its residential population structure and social, economic isolation for insecurd income of the residents. It should be considered that the densely populated area with low-income group of the city causing many problems related with the community. This study focused on the Man-soo 7 housing estate in Incheon with the area's average scale and ratio is made as an effort to include the residents who live in the permanent rental housing area among the members of the healthy community. The result of the research suggests the method of housing improvement to establish the successful support institution for self-sufficiency of the low income inhabitants analazying the demand of the residents through a survey categorized into resident support system, public workplace and inhabitant participation.