• 폴리머
• /
• 제35권2호
• /
• pp.157-160
• /
• 2011

본 연구에서는 전자빔을 이용하여 poly(dimethyl siloxane)(PDMS)을 개질하였으며 그 특성 변화를 분석하였다. PDMS 시트를 기존의 열경화법을 통해 제조한 후 20에서 200 kGy의 흡수선량P로 전자빔을 조사하였고, 조사된 시트들의 특성을 팽윤도 및 접촉각 측정, 만능시험분석기(UTM), 열중랑분석기(TGA), X선 광전자 분광기(XPS)들을 이용해 분석하였다. 팽윤도 측정, UTM 및 TGA 결과, 전자빔 조사에 의해 PDMS 시트의 가교 밀도가 증가함에 따라 조사된 PDMS 시트의 팽윤도는 순수한 것에 비해 최대 24%까지 감소하였고 압축강도와 열분해온도는 순수한 것에 대비 각각 최대 2.5 MPa와 $10^{\circ}C$까지 증가함을 확인하였다. 또한, 접촉각 측정과 XPS 분석 결과를 토대로 전자빔 조사에 의한 산화 반응에 의하여 PDMS 표면에 친수성 관능기들이 형성되기 때문에 PDMS 표면의 젖음성은 순수한 것에 비해 최대 24%까지 향상됨을 확인하였다.

• 한국식품과학회지
• /
• 제28권3호
• /
• pp.514-520
• /
• 1996

감마선 조사기법을 사용하여 새로운 건식공정의 공업용 변성전분 생산 기술개발을 위한 기초연구로서, 시판 옥수수 전분에 직접 감마선을 조사하여 감마선 조사 전분(0-110 kGy)의 이화학적 성질을 검토하였다. 감마선 조사선량이 증가함에 따라 blue value가 직선적으로 감소하였으며, alkali number와 용해도는 크게 증가하였다. $65-95^{\circ}C.$의 온도범위에서 전분용액의 광투과도 또한 감마선 조사선량이 증가함에 따라 현저히 증가하였으며, 물결합능력과 팽윤력은 각각 30 kGy 및 10kGy에서 최대값을 나타내다가 다시 감소하는 경향을 나타내었다. 비조사 전분에 비해 감사선 조사 전분의 호화점도는 현저한 감소 현상을 나타내었다. peak 점도의 경우 7,000 B.U.(비조사 전분)에서 60 B.U.(110kGy)로 그 값이 100배 이상 현저히 감소하였으며 $30^{\circ}C$의 냉각점도도 약 300배 이상 급격한 감소를 나타내었다. 현재 시판중인 산처리 전분은 30kGy의 감마선조사 전분과 유사한 특성을 나타내었으며, 산화전분은 100kGy의 감마선 조사전분과 유사한 성질을 나타내었다.

• 한국식품과학회지
• /
• 제25권1호
• /
• pp.83-85
• /
• 1993

밤을 $0.15{\sim}0.45\;kGy$ 범위의 감마선으로 처리하고 이로부터 분리한 전분의 성질을 조사하였다. 감마선 처리에 따라 전분의 물결합 능력은 다소 증가되었고, 고유점도와 아밀로그래프 점도는 일정하게 감소되었다(r=-0.950). 그러나 전분의 팽윤력, blue value 및 광투과도는 발아억제 선량범위에서 변화되지 않았다.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3063-3070
• /
• 2014

In this study, poly(N-methylol methacrylamide) (NMMAAm) and poly(N-methylol methacrylamide/vinyl sulphonic acid) (NMMAAm-VSA) hydrogels were synthesized by $^{60}Co-{\gamma}$ ray irradiation at an ambient temperature. The graphs belonging to the gelation percent- percent-dose and swelling curves were drawn by using data which were obtained from water and different pH solutions. Characterization of hydrogels was performed by FTIR and DSC-TGA analysis. Heavy metal ion ($Ni^{2+}$, $Co^{2+}$) removal capacities of hydrogels were investigated in aqueous solutions, which had different concentrations (100-1500 mg/L). In metal ion removal studies, pH value of aqueous medium was kept constant at 5.0. Maximum metal ion removal values were obtained for NMMAAm-VSA (1:3 mole ratio) hydrogels. Metal ion removal capacities of NMMAAm-VSA (1:3 mole ratio) hydrogels were found as 82 mg/g and 98 mg/g for $Ni^{2+}$ and $Co^{2+}$ ions, respectively.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.219-224
• /
• 2004

In this work, we prepared hydrogels for wound dressing from a mixture of poly(vinyl alcohol) (PVA) and alginate using the $\^$60/Co ${\gamma}$-ray irradiation technique. We examined the physical properties of these hydrogels, including gelation, water absorptivity, and gel strength, to evaluate the applicability of these hydrogels for wound dressings. The biocompatibility of these hydrogels was also evaluated in vitro, in cultures of mouse fibroblasts, and in vivo, by subcutaneous implantation studies in rats. The gel content and strength increased upon increasing the radiation dose and upon decreasing the concentration of alginate. The degree of swelling was inversely proportional to the gel content and strength. The degree of cytotoxicity of the ${\gamma}$-ray-treated hydrogels was ca. 60% compared to the (－) control (serum) after 1 day of incubation. When the incubations were prolonged up to 2 days, the toxicity of all the samples decreased remarkably and reached that of the control. Subcutaneous implantation studies in rats indicated that foreign body reactions occurring around the implanted hydrogels were moderate and became minimal upon increasing the implantation time.

• 치과방사선
• /
• 제13권1호
• /
• pp.17-27
• /
• 1983

The author observed the effects of /sup 60/Co irradiation on the development and subcellular structure of tongue tissue of the fetal rats. The lower left abdomen of mothers were exposed to radiation on 15½th day of gestation with 300R. The fetuses were removed on the 6hr, 14hr, 24hr, 48hr and 72hr after irradiation and the light microscopic and electron microscopic observations of the lingual epithelium, lamina propria and muscle layer were carried out. The results were as follows: 1. The irradiated fetuses showed the retardation of filiform papillae formation. 2. Epithelial cells revealed fusion and myelination of mitochondria, large autolysosomes, increased lipid droplets, retardation of tonofilaments and desmosome formation. 3. In the lamina propria, undifferentiated cells showed bleb formation of nuclear membrane, pyknosis and fragmentation of nucleus, edema of cytoplasm I and nucleus, increased auto-lysosomes, dilatation of cell membrane and cell necrosis. Also, collagenous fibril formation was inhibited by irradiation. 4. In the muscle layer, growth of myotubes was inhibited. Myotubes showed swelling of mitochondria, loss of mitochondrial cristae, autolysosomes, retardation of myofibril formation, and large vacuoles. Undifferentiated cells adjacent myotube contained pyknotic nucleus and autolysosomes. 5. Among the various tissues of tongue, it seems that mesenchymal cells were most radiosensitive.

• Macromolecular Research
• /
• 제13권4호
• /
• pp.327-333
• /
• 2005

pH-sensitive hydrogels were studied as a drug carrier for the protection of insulin from the acidic environment of the stomach before releasing it in the small intestine. In this study, hydrogels based on poly(ethylene oxide) (PEO) networks grafted with methacrylic acid (MAA) or acrylic acid (AAc) were prepared via a two-step process. PEO hydrogels were prepared by ${\gamma}-ray $ irradiation (radiation dose: 50 kGy, dose rate: 7.66 kGy/h), grafted by either MAA or AAc monomers onto the PEO hydrogels and finally underwent irradiation (radiation dose: 520 kGy, dose rate: 2.15 kGy/h). These grafted hydrogels showed a pH-sensitive swelling behavior. The grafted hydrogels were used as a carrier for the drug delivery systems for the controlled release of insulin. Drug-loaded hydrogels were placed in simulated gastric fluid (SGF, pH 1.2) for 2 hr and then in simulated intestinal fluid (SIF, pH 6.8). The in vitro drug release behaviors of these hydrogels were examined by quantification analysis with a UV-Vis spectrophotometer.

• 에너지공학
• /
• 제13권3호
• /
• pp.181-190
• /
• 2004

Computational models for analyzing the in-reactor behavior of metallic fuel pins under transient conditions in liquid-metal reactors are developed and implemented in the TRAMAC (TRAnsient thermo-Mechanical Analysis Code) for a metal fuel rod under transient operation conditions. Not only the basic models for a fuel rod performance but also some sub-models used for transient condition are installed in TRAMAC. Among the models, a fission gas release model, which takes the multi-bubble size distribution into account to characterize the lenticular bubble shape and the saturation condition on the grain boundary and the cladding deformation model have been developed based mainly on the existing models in the MAC-SIS code. Finally, cladding strains are calculated from the amount of thermal creep, irradiation creep, and irradiation swelling. The cladding strain model in TRAMAC predicts well the absolute magnitudes and gen-eral trends of their predictions compared with those of experimental data. TRAMAC results for the FH-1,2,6 pins are more conservative than experimental data and relatively reasonable than those of FPIN2 code. From the calculation results of TRAMAC, it is apparent that the code is capable of predicting fission gas release, and cladding deformation for LMR metal fuel finder transient operation conditions. The results show that in general, the predictions of TRAMAC agree well with the available irradiation data.

• 치과방사선
• /
• 제22권1호
• /
• pp.43-53
• /
• 1992

The purpose of this study was to investigate the effects of irradiation on the microvascular structure of the submandibular gland in rats. For this study, 110 male rats were singly irradiated with the dose of 10Gy or 20Gy to their neck region by 6MV X-irradiation and sacrificed on the 1st, 3rd, 7th, 14th and 28th day after irradiation. The author observed distribution and structural changes of the microvasculature in rat submandibular glands using a scanning electron microscope by forming vascular resin casting. The author observed ultrastructural changes of the endothelial cells using a transmission electron microscope, and also histologic changes using a light microscope at Hematoxylin and Eosin staining and PAS staining process. The results of the irradiation effects on the microvasculature in rat submandibular gland were as follows: By light microscopic examination, the dilation of small vessels were observed until the 7th day after irradiation. After then, the vascular constriction and decrease in number of small vessels were noticed. Changes were greater on 20Gy irradiated group than on lOGy irradiated group. The reaction to PAS staining at acinar cells was decreased just after irradiation, but gradually recovered with days. There was no specific difference between two irradiated groups. By scanning electron microscopic examination, general findings on the two irradiated groups were similar. The dilation of conduits and meandering were observed on the 3rd day after irradiation. Decrease of capillary density and blunt ended small vessels were appeared on the 7th day after irradiation. After that, findings of the tortuous and twisted vascular running and coarseness of capillary lumen were increased. Changes were greater on 20Gy irradiated group than on l0Gy irradiated group. By transmission electron microscopic examination, increase of the formation of cytoplasmic process was observed on the 3rd day after irradiation. After that, swelling of endothelial cell and bridge formation of cytoplasmic processes were also observed, but destruction of endothelial cell and loss of basement membrane were observed only on 20Gy irradiated group on the 28th day after irradiation.

• 폴리머
• /
• 제26권6호
• /
• pp.792-802
• /
• 2002

본 연구에서는, 방사선($^{60}$Co ${\gamma}$-rays) 가교를 이용하여 poly(vinyl alcohol)(PVA)/poly(N-vinylpyrrolidone)(PYP)/글리세린/키토산의 혼합물로부터 하이드로겔을 제조하였다 하이드로겔이 상처 치료용 드레싱으로 사용될 수 있는지 예측하기 위해 겔화율, 팽윤도, 겔강도 같은 기계적 성질을 측정하였다. PVV와 PVP의 조성비는 6 : 4, 키토산은 0.3 wt%, 글리세린은 0~5 wt%, PVA/PVP/글리세린/키토산 수용액의 고형분의 농도는 15 wt%이었다. 하이드로겔의 기계적 성질에 조사선량이 미치는 영향을 예측하기 위해 PVA/PVP/글리세린/키토산 혼합물에 25~60 kGy의 감마선을 조사하였다. 겔화율과 겔강도는 글리세린 조성비가 작을수록 조사선량이 커질수록 증가하였다. 팽윤도는 글리세린 조성비가 클수록, 조사선량이 작을수록 증가하였다. PVA/PVP/글리세린/키토산 하이드로겔에서 글리세린은 겔 모양의 변형을 막는다. 제조된 하이드로겔이 상업용 바셀린 거즈보다 치료 효과가 우수하였다.