• International Journal of Human Ecology
• /
• 제4권1호
• /
• pp.35-44
• /
• 2003

This study investigated the effects of dietary phyate reduction on the apparent absorption and biochemical parameters of iron status in young Korean women. Fourteen healthy, young women consumed low and high phytate diets for ten days of each experimental period. Duplicate diet samples, a fasting blood sample on day 9, and complete fecal samples for five consecutive days starting from day 5 of each diet period were collected. The iron content of diet and fecal samples were analyzed to calculate apparent absorption. Serum samples were analyzed for iron, ferritin, transferrin receptor and TIBC; transferrin saturation was also calculated. The apparent absorption of iron tended to increase in the low phytate period (32.51%) compared to the high phytate period (17.91%), but the difference was not significant (p=0.06). Serum ferritin decreased and serum transferrin receptor increased significantly during the low phytate diet although the mean values were within the normal range. Serum iron and transferrin saturation did not change significantly. In conclusion, the results indicated that reducing dietary phytate for ten days negatively affected iron nutritional parameters, but it moderately and positively affected apparent iron absorption in young Korean women. Further research on the long-term effects of a low phytate diet with an adequate iron content for vows Korean women is necessary.

• 자원환경지질
• /
• 제56권4호
• /
• pp.475-499
• /
• 2023

경상지역 제철유적의 원료산지 추정을 위해 제철시료와 주요 철광상 철광석을 대상으로 암석기재학 및 지화학적 특성을 비교 분석하였다. 각 지역에서 발굴된 제철유적 시료는 제련공정 단계에 따라 원료철광석, 괴련철, 괴련철슬래그, 선철, 선철슬래그, 단조박편, 단야철, 철정 및 화살촉으로 분류되었고 각각 상이한 구성광물과 조직을 보였다. 또한 슬래그를 구성하는 규산염광물에서의 알루미늄 및 칼슘 등의 주원소 성분의 농집과 제철유물에서 니켈 및 구리 등의 미량원소 함량이 높은 것은 원료철광석의 특성이 반영된 것으로 잠재적인 제철원료의 산지추정인자로 여겨진다. 특히 제철유적 시료의 납-스트론튬 동위원소비는 크게 1) 원료철광석과 유사한 조성을 보이는 경우, 2) 스트론튬 동위원소비가 부화된 경우, 그리고 3) 납-스트론튬 동위원소비 모두 부화된 경우로 구별되며 이러한 동위원소비 특성은 고온의 제련공정 과정에서 첨가된 특정 조재제와의 혼염 가능성을 시사한다. 이러한 결과는 첨가물이 제련과정에 미치는 잠재적인 기여 측면에서 경상지역 제철유적의 산지추정 해석에 새로운 시각을 제시한다.

• 분석과학
• /
• 제6권3호
• /
• pp.297-305
• /
• 1993

글로우 방전 방출원을 다색화장치에 연결시켜 개발된 글로우방전/방출분광법으로 탄소의 농도가 수 퍼센트에 이르러 스파크방출분광법으로서는 분석이 곤란한 주철시료를 분석하고 정확성을 검토하고자 하였다. 알곤가스 압력, 전압, 방전시간 등 glow discharge lamp(GDL)의 방전조건을 최적화시키고 이 조건에서 두 종류의 주철 표준시료(BAS, LECO)에 대해 원소별 방출 복사선의 세기와 농도의 상관관계를 조사하였다. Mn, Si, P, S 등 대부분 원소의 검정곡선이 양호한 직선성을 보여 주었고 탄소의 경우에는 표준시료의 종류에 따라 절편과 기울기값이 미소하게 계통적인 차이를 나타내었다.

• 청정기술
• /
• 제27권3호
• /
• pp.240-246
• /
• 2021

COF (Chip on film)용 폐에칭용액 내 구리가 약 3.5% 함유되어 있으며, 철 시편을 사용한 시멘테이션을 통해 구리를 회수하고자 하였다. 철 시편 3종류(플레이트, 칩, 분말)에 따른 시멘테이션 반응에 미치는 영향을 조사하였으며, 구리의 회수율을 높이고자 구리에 대한 철의 몰 비를 변수로 하였다. 반응 전·후 용액 내 시간에 따른 구리 농도의 변화를 확인하였으며, 몰 비를 증가시킬수록 초기 용액 내 구리 함량이 급격히 줄어드는 경향이 나타났다. 상온에서 1시간의 시멘테이션 반응 후 철 시편의 비표면적 값이 큰 플레이트, 칩, 분말 순으로 구리의 회수율이 증가하였다. 회수된 분말은 X선 회절 분석기(X-ray diffraction, XRD), 주사전자현미경(scanning electron microscopy, SEM) 및 에너지 분산형 분광분석법(Energy-dispersive X-ray spectroscopy, EDM) 분석을 통해 결정상과 결정 형태를 확인하였으며, 철 분말의 경우에는 회수된 구리 분말에 미반응된 철 성분이 혼재하였다. 구리에 대한 철의 몰 비 4의 조건으로 철 칩을 사용하였을 때, 구리 회수율 약 98.4%로 최적 조건으로 달성하였다.

• Environmental Engineering Research
• /
• 제10권4호
• /
• pp.174-180
• /
• 2005

Nano-sized iron was synthesized using borohydride reduction of $Fe^{3+}$ in aqueous solution. A wide range of synthesis conditions including varying concentrations of reagents, reagent feeding rate, and solution pH was applied in an aqueous system under anaerobic condition. The reactivity of nano-sized iron from each synthesis was evaluated by reacting the iron with TCE in batch systems. Evidence obtained from this study suggest the reactivity of iron is strongly dependent on the synthesis solution pH. The iron reactivity increased as solution pH decreased. More rapid TCE reduction was observed for iron samples synthesized from higher initial $Fe^{3+}$ concentration, which resulted in lower solution pH during the synthesis reaction. Faster feeding of $BH_4^-$ solution to the $Fe^{3+}$ solution resulted in lower synthesis solution pH and the resultant iron samples gave higher TCE reduction rate. Lowering the pH of the solution after completion of the synthesis reaction significantly increased reactivity of iron. It is presumed that the increase in the reactivity of iron synthesized at lower pH is due to less precipitation of iron (hydr)oxides or less surface passivation of iron.

• 한국세라믹학회지
• /
• 제11권2호
• /
• pp.22-30
• /
• 1974

This study was carried out to investigate the species of iron compounds in kaolin mineral and the bonding relation between the major kaolin and its subordinate iron compound existing as incidental mineral in common clay by means of chemical composition, X-ray diffraction, thermal differential and thermogravimetrie analysis for the application of clays in the field of ceramic raw material. The domestic clay are produced abounduntly in many places, but San-Cheong kaolin, Chu-An clay, and Yeong-Am clay were selected as samples in this experiment because of their frequent utilization in porcelain industry. Two kinds of samples with low and high iron content are picked up respectively from the place of production and elutriated under two micron size to determine the properties and concentration of iron compound very fine particles or colloidal substance of low crystalline grade. Therefore, hydrothermal treatment in autoclave was conducted considering the existence of low crystalline grade of iron compounds known as an amorphoue state in X-ray diffraction pattern furthermore, de-iron treatment of hydrothermal compound was done in order to identify the related iron compound before and after hydrothermal reaction and iron compound which is one of the samples was synthesized for the determination of their compounds state in more detail. The obtained results in this study are as follows: In San-Cheong kaolin, Chu-An clay and Yeong-Am clay 1) It is proved that species accompanying iron compound is $\alpha$-FeOOH form. 2) Iron compound is composed of very fine particles or colloidal substance. 3) The iron substance encircles the fine parts of clay minerals under 2 micron and acts as cementizing agent.

• Geosystem Engineering
• /
• 제21권5호
• /
• pp.262-272
• /
• 2018

The U-statistic method is one of the most important structural methods to separate the anomaly from background. It considers the location of samples and carries out the statistical analysis of the data without judging from a geochemical point of view and tries to separate subpopulations and determine anomalous areas. In the present study, 3D U-statistic method has been applied for the first time through the three-dimensional (3D) modeling of an ore deposit. In order to achieve this purpose, 3D U-statistic is applied on the data (Fe grade) resulted from the drilling network in Baghak mine, central part of the Sangan iron mines (in Khorassan Razavi Province, Iran). Afterward, results from applying 3D U-statistic method are used for 3D modeling of the iron mineralization. Results show that the anomalous values are well separated from background so that the determined samples as anomalous are not dispersed and according to their positioning, denser areas of anomalous samples could be considered as anomaly areas. And also, final results (3D model of iron mineralization) show that output model using this method is compatible with designed model for mining operation. Moreover, seen that U-statistic method in addition for separating anomaly from background, could be very efficient for the 3D modeling of different ore type.

• 한국주조공학회지
• /
• 제24권1호
• /
• pp.52-59
• /
• 2004

Microstructure and mechanical properties of ductile cast iron were investigated in terms of diameter change of samples that gives rise to modify the microstructure due to different cooling rate in the continuous casting process. The chemical composition used in this study was GCD 400 grade. From the microstructural observation, we have found a large number of graphite with small size in diameter which is comparable to the microstructure of the sample produced by conventional sand casting. The major reason of this would he due to high cooling rate. In the sample with 26 mm in diameter, the microstructure was composed of pearlite, iron carbide, and graphite. In the samples with 60 and 100 mm in diameter, however, we have observed a dissimilar microstructure that consisting of ferrite and graphite. Concerning the mechanical property, the sample with 26 mm in diameter showed higher hardness and strength compared to those samples with 60 and 100 mm in diameter. The result obtained for ductility appeared a reversal. Much more works such as inoculation, process design and chemical composition would be required in order to have a sound product even in a small diameter of samples.

• 복식
• /
• 제49권
• /
• pp.49-63
• /
• 1999

This research utilized the Energy Dispersive X-ray Spectroscopy(EDS) and the Inductively Coupled Plasma Mass Spectrometry in the analysis of chemical elements present among the textiles exhumed from Kupori Hwasung-kun Kyunggi-do. The two research objectives were: first to examine the elements present and their percent presence in Kupori samples: second to investigate whether the elements are part of mordant substances which could have been used when dyeing the KUpori textiles in the past. To meet such research purposes standard silk fabric was dyed with Sophorajaponica using alum and iron mordants. For alum mordant unpurified general alum and potassium aluminum sulfate(AlK(SO4)2). iron sulfate(FeSO4·7H2O) were used, From the results of EDS and ICP-Mass analysis the following conclusions were drawn. 1 According to the EDS analysis 9 elements Ca, S, Al, Si, K, Fe, P, Mg and Na were detected. 2. ICP-Mass result of the mordant chemicas showed high amount of A, Al and k present in alum mordants and S and Fe present in iron mordants. 3. Comparison of the ICP-Mass results of the mordant chemicals and those of the standard dyed samples suggested that the amount presence of Al and Fe is a strong indication of the usage of alum and iron mordants respecticely in an unknown dyed textile. 4, In the washed Kupori textiles Fe showed a relatively higher rate of presence in the samples Therefore it can be conjectured that those Kupori textiles were dyed with iron mordant based on the result of the above number 3. 5. It is probable that the other elements detected from the Kupori samples were incorporated into the textiles as part of the soil debris produced from the degradation of the dead within the coffin or the earth debris. They can also be part of the inorganic compounds inherent in the silk textiles themselves before dyed. 6. Among the elements it is likely that Ca which showed a high degree of presence among the unwashed samples was part of the inorganic compound inferent in the silk textiles.

• 한국환경보건학회지
• /
• 제17권1호
• /
• pp.129-135
• /
• 1991

To investigate on the trace element content of twelve edible mushrooms and Aloe arborescens, i. e., Lentinus edodes, Ganoderma lucidum (culturing in wood and soil), Tricholoma matsutake, Agaricus bisporus, Cyrophora esculenta, Auricularia auricula-Jude (produced in Korea and China), Sarcodon asparatus, Pleurotus ostreatus, Coriolus versicolor, Smilax rotundifolia and Aloe arborescerts were analyzed by Atomic absorption spectrometer. The obtained results were summerized as follows: 1. Potassium, sodium, magnesium and iron content for the most part samples were in large quantities, especially phosphorus content of those was highest ammount for the all samples. 2. Sodium content was much ammount in the Lentinus edodes (39mg) and Ganoderma lucidurn (20 mg), Culturing in wood and soil, while potassium was very high ammount in the Aloe arborescens and other samples. Mush ammount of magnesium as compared with others was Lentinus edodes (144mg), Ganoderma lucidurn (128mg), Aloe arborescerts (50mg) and pleurotus ostreatus (60mg). Phosphorus content of Ganoderma lucidurn, Lentinus edodes, Gyrophora esculenta, Auricularia polytricha and Agaricus bisporus was much ammount while iron content of all samples equality higher ammount. Sodium content of Aloe arborescens was not analyzed out for almost all, its potassium (82mg), magnesium (50mg) and iron (18rng) content comparatively higher quentity than others minerals and phosphorus volume (4.9mg) as compared with others, was conspicuously lower detect. 4. Cadimium and lead content of harmful metal element were detected on trace quentity for the most part samples 5. Organic acids of samples i.e., Legtinus edodes, Agaricus bisporus, Pleurotus ostreatus and Ganoderma lucidum were Citrate, Malate, Fumalate, Succinate, Oxalate, Acetate, Lactate, and Tartarate and Citrate, Malate and Fumarate contents were higher amount remarkbly than other organic acids. Tartarate content was trace amount.