• Korean Journal of Plant Resources
• /
• v.19 no.6
• /
• pp.649-654
• /
• 2006

The objective of present study was to investigate the anti oxidative and hepatoprotective effects of tomato extracts. Total antioxidant capacity and total antioxidant response were 5.5 and $19.8{\mu}g$ Trolox equivalent per mg of tomato extract, respectively. DPPH radical scavenging activity of tomato extracts ($10mg\;ml^{-1}$) was 70% as compared to 100% by pyrogallol solution as a reference. The effect of the tomato extracts on lipid peroxidation was examined using rat liver mitochondria induced by iron/ascorbate. Tomato extracts at the concentration of $0.5mg\;ml^{-1}$ significantly decreased TBARS concentration. Tomato extracts prevented lipid peroxidation in a dose-dependent manner. The effect of the tomato extracts on reactive oxygen species (ROS) generation was examined using cell-free system induced by $H_2O_2/FeSO_4$. Addition of $1mg\;ml^{-1}$ of tomato extracts significantly reduced dichlorofluorescein (DCF) fluorescence. Tomato extracts caused concentration-dependent attenuation of the increase in DCF fluorescence, indicating that tomato extracts significantly prevented ROS generation in vitro. The effect of tomato extracts on cell viability and proliferation was examined using hepatocyte culture. Primary cultures of rat hepatocytes were incubated with 1mM tert-butyl hydroperoxide (t-BHP) for 90 min in the presence or absence of tomato extracts. MTT values by addition of tomato extracts at the concentration of 2, 10, and $20mg\;ml^{-1}$ in the presence of t-BHP were 13, 33 and 48%, respectively, compared to 100% as control. Tomato extracts increased cell viability in a dose-dependent manner. These results demonstrate that tomato extracts suppressed lipid peroxidation and t-BHP-induced hepatotoxicity and scavenged ROS generation. Thus antioxidant and hepatoprotective effects of tomato extracts seem to be due to, at least in part, the prevention from free radicals-induced oxidation, followed by inhibition of lipid peroxidation.

• Membrane Journal
• /
• v.26 no.2
• /
• pp.135-140
• /
• 2016

In this study, the organic-inorganic composite membranes composed of iron oxide (Ferroxane) and Nafion were developed as an alternative proton exchange membranes (PEMs) in proton exchange membrane fuel cell (PEMFC). Acetic acid-stabilized lepidocrocite (${\gamma}$-FeOOH) nanoparticles (ferroxane) was synthesized, and the ferroxane-Nafion composite membranes were prepared by mixing Nafion with the ferroxane. The composite membranes were investigated in terms of ionic conductivity, ion exchange capacity (IEC), FT-IR, thermal stability, etc. As a result, the ferroxane-Nafion composite membranes showed higher proton conductivity, IEC, thermal stability than Nafion recast membranes. The proton conductivity and IEC of the composite membrane with the best performance were $0.09S\;cm^{-1}$ and $0.906meq\;g^{-1}$, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.11 no.2
• /
• pp.85-96
• /
• 1998

The sericite ore is formed by the hydrothermal alteration of rhyodacitic welded tuff. The alteration zone of the host rock can be classified into four types based on the mineral assemblages ; sericite, quartz-sericite, silicified and propylite zone. The sericite ore mainly occurs as vein types and fault clay along the fault plane in the quartz-sericite zone. Mineral components of the sericite ore are mainly sericite with minor diaspore, corundum and pyrite. The sericitic porcelaineous ore is mainly composed of quartz and sericite. Accessory minerals are muscovite, diaspore, sphene, corundum, pyrite, iron-oxides and etc. The chemical compositions of K2O, Al2O3, and ignition loss in the sericite ore increase largely than that of the host rock, while the compositions of SiO2, Na2O and Fe2O3 decrease. XRD patterns of the heat-treated sericite ores show the formation of mullite at $1,200^{\circ}C$. and the diaspore-bearing sericite ore forms mullite and corundum at $1,200^{\circ}C$. The differential thermal analysis of the sericite ores show small endothermic peak at 645~668$^{\circ}C$. and the diaspore-bearing sericite ore shows a strong endothermic peak at $517^{\circ}C$. It indicates that the decomposition of diaspore appear at lower temperature than that of sericite. The thermal expansivity of the sericite ores show the similar pattern. The sericite ores show the thermal expansivity of 3.3~4.7% at 900$^{\circ}C$ and 0.39~0.75% at 1,20$0^{\circ}C$, respectively. DTA-TG curves of the sericite ores show closely relations with the thermal expansivity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.12
• /
• pp.792-796
• /
• 2015

With high integration of electronic components, power inductors are also miniaturized. Recently, thick film processes for small size power inductors were developed and commercialized. However, the thick film process to prepare soft magnetic green sheets was not reported enough. In this study, we used Fe-Si magnetic and CIP (carbonyl iron powders) as starting materials to lead to a bimodal particle size distribution in the sheet. We proposed a newly developed 'Modified slurry preparation process' to get well dispersed condition even at high solid contents. Using the new process, it was possible to prepare a well dispersed slurry over 70 vol% of solid. BYK-103 was better than BYK-111 as dispersant in this slurry and the optimum amount was 0.6 wt%. The optimized slurry was formed into a sheet by tape casting process and then the sheet was laminated. We conformed that small size powder, large size powder, and epoxy resin were well dispersed in the green sheet.

• The Journal of Korean Medicine
• /
• v.19 no.1
• /
• pp.49-65
• /
• 1998

Holotrichia was tested for the effects on damages of liver tissue induced by bromobenzene. Holotrichia was treated firstly into samples, and then bromobenzene intoxicated animal models were set with them. In vitro, the level of lipid peroxide in tissue of liver proportinally decreased with the level of concentration of extract prepared from Holotrichia It was much more decreased, when lipid peroxidation was induced with ferrous iron ($Fe&{+2}$). In vivo, after the extract was administered to the animal model for twenty days, the level of lipid peroxide in liver decreased compared to that of bromobenzene-treated group. The enzyme activities of epoxide hydrolase and glutathione S-transferase in liver highly increased in Holotrichia pre-medicating group compare with the group treated with only bromobenzene. And we can get the same results in the enzyme activities of superoxide dismutase, catalase and glutathione peroxidase. The level of glutathione followed by Holotrichia pre-medicationg administration, increased as highly as normal group in compare with the group treated with only bromobenzene. Also, the enzyme activities of AL T, AST and $\{gammer}-GTP$ in liver considerably decreased. In conclusion, Holotrichia recovers the damage of liver due to bromobenzene intoxication by the increased activities of lipid peroxidation and bromobenzene scavenging enzymes.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.4
• /
• pp.5-11
• /
• 2012

Acid mine drainage (AMD) is one of the most severe environmental problem that results from the oxidation of pyrite $(FeS_2)$ and various other metal sulfides. In this study, the influence of microorganism was tested on the process where AMD was released and the method to inhibit AMD generated by microorganisms at abandoned mine area. The activity and growth rate of Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans, common microorganisms affecting AMD occurrence, were measured. Chlorine dioxide $(ClO_2)$, NaCl, or surfactant (ASOR-770) was used as an inhibitor for working on activity and growth of microorganism. Among the three inhibitors, 10ppm of chlorine dioxide was the most effective inhibitor for AMD control due to the reduced the activity and growth of microorganisms by 20%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.3
• /
• pp.316-320
• /
• 1989

This study was performed to assess the contamination levels of the heavy metals (Pb, Cd, Cr, Cu, Fe, Zn and Mn) for common restaurant meals in Seoul area. The samples were seolong-tang, galbi-tang, yeukge-jang, kalguksoo, doenjang-chige, bibim-bab, bibim-nangmyon, bulgogi, chazang-myon, yanggobchang and zumuluk, which were seperated draind residues from fluids. The heavy metal contents were determined by atomic absorption spectrophotometer. The results obtained were as follows : ${\circ}$ The total amount of heavy metals per meals were $131.8{\mu}g\;lead,\;18.4{\mu}g\;cadmium,\;135.5{\mu}g\;chromium,\;804.9{\mu}g\;copper,\;7430.6{\mu}g\;iron,\;2807.4{\mu}g\;zinc,\;and\;841.6{\mu}g$ manganese. ${\circ}$ Intake levels per daily through common restaurant meals were lower than the daily intake limit established by FAO/WHO.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.63-68
• /
• 2017

This study determines the selection of an appropriate jig material for the blade edge of the medical sapphire knife. The physical properties of the jig material affects the edge shape and chipping phenomenon in machining of the medical sapphire knife. If a grinding wheel is used, brittle workpieces such as sapphire are easily damaged by the propagation of cracks because the grinding force significantly increases. It is important to constantly maintain the grinding force in the grinding process of the brittle materials. The grinding force can be kept constantly by inducing the elastic deformation of the Jig material because the elastic deformation of brittle work-piece is negligibly low. The chipping phenomenon may be reduced by selecting the proper Jig material. Aluminum, copper, stainless steels and carbon steel were used as Jig materials. The experiment was conducted using a cast iron grinding wheel, which was installed on a conventional grinding machine with the ELID grinding system. The thickness and width of the chipping area were measured using an optical microscope and FE-SEM to analyze the shape of the blade edge. According to the experiment result, the chipping phenomenon decreased, and the sharp edge was formed when the jig materials with low elastic modulus were used.

• Asian Journal of Turfgrass Science
• /
• v.11 no.2
• /
• pp.89-95
• /
• 1997

Soil chemical properties were investigated to elucidate vertical movement of mineral nutrients in a fairway slope of 27 year-old golf course. Soil samples were taken at every 10cm depth to 4Ocm on 4 sites 20m apart each along two parallel lines 60m apart on the slope(15˚) in August. Accord-ing to the similarity of vertical distribution pattern they could be classified into 6 distinctive groups(magnesium, nitrate, phosphorus, ammonium, manganese and copper) and the slope tended to affect the vertical movement of minerals. The contents of Ca and Mg increased with depth while NO$_3$-N and Zn decreased and correlated positively. Soil pH showed significant positive correlation with depth, Ca and Mg. Phosphorus content was highest in 10~20cm depth and decreased resulting in relatively high content in 30~40cm depth of the bottom site of slope. Iron distribution pattern was similar to phosphorus. Potassium and $NH_4$showed various(irregular) patterns. Mn was highest in the deep layer at the lower sites of slope but it was reverse at the upper sites and negatively correlated with Fe. Cu content incresed with depth and heighest in 20~30cm depth. Electroconductivity showed significant positive correlation with $NO_3$-N. Magnesium, cal-cium and copper seem to be prone to defficiency due to fast leaching, and nitrate and phosphorus prone to excess problem. Preventive measures on acidification of surface soil should be taken.

• Journal of Hydrogen and New Energy
• /
• v.27 no.3
• /
• pp.290-297
• /
• 2016

The absorbent loss due to degradation in $CO_2$ capture process using aqueous alkanol amine solution has adverse effect on the economics of overall process. The degradation causes absorbent loss, equipment corrosion, foaming, adhesive material producing and viscosity increase in operation. In this study, the degradation characteristics of $CO_2$ capture process using MEA (monoehtanolamine) under various conditions such as $O_2$ partial pressure, $CO_2$ loading and absorbent temperature. The effects of iron, which generated from the equipment corrosion, on absorbent degradation were studied using $Fe_2SO_4$ containing MEA solution. The produced gases were analyzed by FT-IR(Fourier Transform Infrared Spectrophotometer) and the specifically measured $NH_3$ concentration was used as a degradation degree of aqueous MEA solution. The experiments showed that the higher $CO_2$ loadings (${\alpha}$), $O_2$ fraction ($y_{O2}$) and reaction temperature enhanced the more degradation of aqueous MEA solution. Comparing other operation parameters, the reaction temperature most affected on the degradation. Therefore, it could be concluded that the above parameters affects on degradation should be considered for the selections of $CO_2$ absorbent and operating conditions.