• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.739-740
• /
• 2010

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권3호
• /
• pp.144-151
• /
• 2003

IPMC(Ionic Polymer-Metal Composite) is promising candidate material for bio-related actuators mainly due to its biocompatibility and wet and soft properties. The widely used commercialized Nafion film has a few kinds of fixed thicknesses but more various film thicknesses are required for extensive applications. Especially for the enhanced force as an actuator, the thick film is essential. Various Nafion films with thickness of 0.4-1.2mm have been prepared by casting of liquid Nafion. Also, IPMC actuators using casted Nafion films have been fabricated and the basic mechanical properties such as stiffness, displacement and force were measured and analyzed. These results can be used for the optimized design of actuators for different applications.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권12호
• /
• pp.601-607
• /
• 2002

IPMC(Ionic Polymer Metal Composite)actuators were optimized for producing improved forces by changing multiple parameters including repetition of number of plating, surface electroding and additive(PVP)-treatment on reduction. The platinum electrode is deposited on the surface of the material where platinum particle stay in a dense form that appears to introduce a significant level of surface electrode resistance. Actuation tests were performed for such IPMC actuators under a low voltage. The test results show that the lower surface-electrode resistance generates higher actuation capability in the IPMC actuators. In order to investigate relaxation behavior of bending and repeatability in dry condition, the IPMC was coated by$rubber(KRATON^{TM})$to minimize the effect of water evaporation from IPMC. This actuator can be used in air with surface coating to avoid membrane drying.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1521-1526
• /
• 2008

IPMC(Ionic Polymer-Metal Comosite) exhibits large deformation, having great attention in many application fields. It generates bending moment by ion exchange polymer film. It can be quickly bended by the applied voltage across the plated electrode of the polymer film. In the present paper, we derive the theoretical modeling and dynamic analysis of bending motions of IPMC actuators using the Euler-Bernoulli beam theory. The theoretical model of a cantilever IPMC actuator estimates the moment produced by the applied voltage. The dynamic characteristics, including natural frequencies and frequency response, are calculated by the theoretical model, and they are compared with the experimental results and finite element analysis. It is shown that the mathematical modeling allows precise estimation to the voltage-driven motion of the cantilever IPMC in air.

• 한국정보통신학회논문지
• /
• 제17권3호
• /
• pp.533-539
• /
• 2013

최근 의료 및 생체공학 분야의 액추에이터(actuator)와 센서 및 연료전지로 활용할 수 있는 새로운 재료인 IPMC(Ionic Polymer Metal Composite)에 대한 관심이 높아지고 있다. 이러한 IPMC의 특징은 센서(sensor)와 액추에이터(actuator)의 성질을 동시에 가지는 있는 특이한 성질을 가진 복합재료로서 IPMC에 전압을 가하면 움직임이 생기며, IPMC에 움직임이 발생하면 IPMC 내부에 전압이 충전되는 성질이 있어 모션 센서나 힘 센서로도 활용할 수 있다. 본 논문에서는 이러한 IPMC에 대한 몇 가지 특성을 파악하고 IT 기술인 스마트폰의 연계하여 원격지에서 IPMC의 동작을 제어할 수 있도록 시스템을 구성하였다. 또한, 스마트폰을 기반으로 하여 영상정보를 전송하여 모니터링 하도록 하였다. IPMC의 동작제어는 스마트폰의 블루투스를 이용하여 동작명령을 전송하도록 시스템을 구현하였다. 본 논문의 실험 및 구현으로부터 IPMC 물성에 대한 정확한 분석은 부족하지만 향후 IPMC의 활용에 있어서 IT 기술과의 융합을 통하여 센서, 액추에이터, 연료전지 등과 같은 분야에 적극 활용할 수 있음을 확인할 수 있었다.

• 한국항공우주학회지
• /
• 제35권4호
• /
• pp.302-307
• /
• 2007

본 연구에서는 이온성 폴리머-금속 복합재료 (IPMC) 작동기를 사용한 플랩 밸브 마이크로 펌프의 설계, 제작 및 실험적 특성 규명을 수행하였다. 나피온/실리케이트 층과 나피온/실리카 나노복합재료를 기반으로 한 다층형 IPMC를 마이크로 펌프의 작동층으로 사용하였다. 마이크로 펌프의 핵심 요소인 IPMC 다이아프램의 주위를 유연한 폴리디메틸실옥산(PDMS)을 사용하여 지지하도록 함으로써 상당히 큰 작동 변위를 내도록 설계하였다. 이렇게 개발된 마이크로 펌프의 크기는 $20{\times}20{\times}5$ ${mm}^3$ 이고, 최대 유량은 760 l/min, 최대 배압은 1.5 kPa이었다. 본 연구에서 개발한 마이크로 펌프는 간단하고 효율적인 설계를 수행하여 제작이 용이할 뿐 아니라, 동작 전압이 1-3V라는 장점이 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1558-1562
• /
• 2008

Ionic polymer metal composite (IPMC), one of Electro- Active Polymer (EAP) actuators, has great attention due to the low-voltage driven, large deformation and its potential for artificial muscles. In this paper, we firstly review fish swimming modes using various propulsion mechanisms. Based on study on the swimming mechanisms, we develop an underwater robot actuator which mimics fanning motion of webfoot form. It consists of four actuators fabricated by using IPMC and PDMS which mimics Bio-inspired motion Experiments using a prototype show that the webfooted IPMC actuator generates large deformation and propulsion.

• 한국정밀공학회지
• /
• 제31권7호
• /
• pp.643-649
• /
• 2014

In order to demonstrate the possibility of applying an ionic polymer metal composite (IPMC) to a finger exoskeleton, pinching motion analysis was performed for a thumb-index finger dummy actuated by IPMC actuators. The IPMC actuators of 5mm in width and 40mm in length with 2.4mm thickness generated 1.52N of blocking force for the applying voltage of 4.0V. Three actuators were installed on the three rotary joint of an index finger, and one actuator was installed on one proximal joint. Positions of each joint and finger tip were recorded on the video camera, and motion was analyzed. Power supply to the index finger actuators preceded power supply to the thumb actuator, and key pinching motion was accomplished in 180s. Tip pinching was accomplished in 135s as power supply to the thumb preceded power supply to the index finger.

• ETRI Journal
• /
• 제31권6호
• /
• pp.695-702
• /
• 2009

We propose a lens-drive unit composed of an ionic polymer-metal composite (IPMC) for an auto-focus compact camera module in cellular phones to solve the power consumption problem of voice coil motors which are widely used in commercial products. In this research, an IPMC incorporated into a lens-drive unit is designed to implement a large displacement in low-power consumption by using an anisotropic plasma treatment. Experimental results show that a camera module containing IPMCs can control and maintain the position of the lens by using proportional integral derivative control with a photo-reflective position sensor despite the non-linear actuation behavior of IPMCs. We demonstrate that the fabrication and commercialization of a lens actuator that has a large displacement and low power consumption using IPMCs is possible in the near future.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권9호
• /
• pp.455-463
• /
• 2002

Ionic Polymer metal composite(IPMC), one of new actuation materials of EAPs is fabricated by electroless plating of platinum on both sides of the perfluorosulfonic acid film or Nafion film and its electromechanical characteristics are investigated. The IPMC strip bends towards anode under electrical field. As the number of plating cycle increases, the distance between plated platinum electrodes on both sides of Nafion membrane decreases and also the displacement is almost inversely proportional to the number of plating. The displacement of IPMC strip depends on voltage magnitude and applied signal frequency and its maximum deformation is observed at a critical frequency, resonant frequency. Low pressure sandblasting is used for surface treatment of Nafion membrane and at 8 times of plating cycle produced actuator with high displacement performance. For more efficiency of fabricated IPMC, it is useful to add one or two surface developing step which is the second reduction process using hydrazine.