• The Korean Journal of Food And Nutrition
• /
• v.6 no.4
• /
• pp.307-313
• /
• 1993

Bacillus cereus $\beta$-amylase was purified by Sephadex G-100 gel filtration, CM Sephadex C-50 ion exchange chromatography and CM Sephadex C-50 ion exchange rechromatography The purified enzyme showed 871 unit/mg of specific activity. The purified enzyme was identified as homogenious by disc PAGE, SDS-PAGE and analysis of reaction product. The purified enzyme showed optimum pH 7.0. optimum temperature 5$0^{\circ}C$, and was stable at 0~5$0^{\circ}C$ and at pH range of 6~10.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.241-246
• /
• 2003

The transparent conducting thin film of ATO (antimony-doped tin oxide) was successfully fabricated on$SiO_2$/glass substrate by a sol-gel dip coating method. The crystalline phase of the ATO thin film was identified as SnO$_2$ major phase and the film thickness was about 100 nm/layer at the withdrawal speed of 50 mm/minute. Optical transmittance and electrical resistivity of the 400 nm-thick ATO thin film which was annealed under nitrogen atmosphere were 84% and $5.0\times 10^{-3}\Omega \textrm{cm}$, respectively. It was found that the $SiO_2$ layer inhibited Na ion diffusion and the formation of impurities like $Na_2SnO_3$ or SnO while increasing Sb ion concentration and higher ratio of $Sb^{5+}/Sb^{3+}$in the film. Annealing at nitrogen atmosphere leads to the reduction of $Sn^{4+}$ as well as $Sb^{5+}$ resulting in decrease of the electrical resistivity of the film.

• Microbiology and Biotechnology Letters
• /
• v.31 no.3
• /
• pp.224-229
• /
• 2003

A keratinolytic protease was purified from the culture medium of Pseudomonas sp. KP-364 by use of an assay of the hydrolysis of feather keratin. Membrane ultrafiltration and DEAE-cellulose ion-exchange resin and Sephadex G-150 gel chromatographies were used to purify the enzyme. The specific activity of the purified keratinolytic protease relative to that in the original medium was approximately 72-fold high. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Sephadex G-150 chromatography indicated that the purified keratinolytic protease is monomeric and has a molecular weight of 36 kDa. The optimal pH and temperature of the keratinolytic protease activity were 6.6 and 37 C, respectively, and the keratinolytic protease was relatively stable at pH value from 3.0 to 10.0 at 37 C for 1hour. The keratinolytic protease was inhibited by EDTA and EGTA, indicating that the keratinolytic protease was a kind of metalloprotease that require Li+ for cofactor.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.440-446
• /
• 1989

Penicillium sp. CB-20 was selected for its strong polygalacturonase activity among various strains of molds found in soil. It was found that the production of polygalacturonase reached to maximum when on the wheat bran medium containing pectin as carbon source, the strain was cultured for 60 hours at 3$0^{\circ}C$. The enzyme was purified to 29.21 food by ammonium sulfate treatment, Sephadex G-25, G-15, G-150 gel filtration, DEAE-cellulose and DEAE-Sephadex A-50 ion-exchange chromatography. Yield of the enzyme purification was 2.31 %. When the purified enzyme was applied to sodium dodecyl sulfate polyacrylamide gel electrophoresis, the molecular weight was estimated 21, 000. The amino acid composition indicated relatively high contents of gultamic acid, glycine and histidine.

• Applied Biological Chemistry
• /
• v.33 no.1
• /
• pp.73-78
• /
• 1990

Endo-polygalacturonase was purified from tomato, Lycopersicon esculentum L. The purification procedures included gel filtration on Sephadex G-150 and DEAE-cellulose ion exchange chromatography. Yield of the enzyme purification was 12.74 %. Purified enzyme was confirmed as a active single band by the SDS-polyacrylamide gel electrophoresis. When the purified enzyme was applied to SDS-PAGE, the molecular weight was estimated about 50,000. The optimum pH for the enzyme activity was 5.0 and the range of its stability to the pH was 4.0 to 5.0. The optimum temperature was $50^{\circ}C$, while the enzyme was abruptly inactivated above $50^{\circ}C$. From the result of the study on the effects of metals ion, it was found that $Ag^+$, $Zn^{++}$ and $Mg^{++}$ increased on the enzyme activity. In contrast, $Ba^{++}$, $Hg^{++}$, $Pb^{++}$, $Ca^{++}$, $Mn{++}$, $Cu^{++}$, $Fe^{+++}$, $Na^+$ and $K^+$ decreased it. the reaction catalyzed by this enzyme followed typical Michaelis-Menten kinetics with the Km value of $1.43{\times}10^{-1}\;mol/l$.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.4
• /
• pp.189-193
• /
• 2004

Lithium secondary battery with gel polymer electrolyte, which was composed of POAGA and TEGDMA, was prepared and its cell performances were evaluated. Collation time decreased with increasing the contents of the monomer in the POAGA-based gel polymer electrolyte. The polymer electrolyte was stable up to 4.5V electro-chemically and its ionic conductivity was $5.2\times10^{-3}Scm^{-1}$ at room temperature. The lithium-ion polymer battery with $3.0wt\%$ curable monomer and $1.0wt\%$ monomer showed rate-capability, low-temperature performance and cycleability.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.9
• /
• pp.967-972
• /
• 2004

Hardness and surface property of coated gel materials are considerably different according to kinds(particle size/stabilized ion) of colloidal silica(CS), kinds of silanes, content ratio of silane versus CS, and reaction degree in sol solution. We report the properties of sol-gel coating materials in which the factors of reaction are kinds of CS, contents ratio of CS and MTMS, and reaction time of sol. The contact angles of the coated films obtained from the mixed CS system showed a little good relationship with MTMS content increase to those from HSA CS reaction system and the change of contact angle didn't have much effect on reaction time of sol. In the coating films obtained from HSA CS reaction system, the surface was much rough in case of that the content MTMS decreased and the reaction of sol kept long. The surface roughness of films obtained from the mixed CS reaction system showed similar tendency, though its degree was a little different. In synthesis of sol-gel coating materials, we could identify that choice of CS kinds and content ratio of CS and silane were important and it was desirable the reaction time of sol is not long.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.547-552
• /
• 2019

Electrochemical properties of $LiMn_{0.8}Fe_{0.2}PO_4$ cathode were investigated with gel polymer electrolyte (GPE). To access fast and efficient transport of ions and electrons during the charge/discharge process, a pure and well-crystallized $LiMn_{0.8}Fe_{0.2}PO_4$ cathode material was directly synthesized via spray-pyrolysis method. For high operation voltage, polyacrylonitrile (PAN)-based gel polymer electrolyte was then prepared by electrospinning process. The gel polymer electrolyte showed high ionic conductivity of $2.9{\times}10^{-3}S\;cm^{-1}$ at $25^{\circ}C$ and good electrochemical stability. $Li/GEP/LiMn_{0.8}Fe_{0.2}PO_4$ cell delivered a discharge capacity of $159mAh\;g^{-1}$ at 0.1 C rate that was close to the theoretical value ($170mAh\;g^{-1}$). The cell allows stable cycle performance (99.3% capacity retention) with discharge capacity of $133.5mAh\;g^{-1}$ for over 300 cycles at 1 C rate and exhibits high rate-capability. PAN-based gel polymer is a suitable electrolyte for application in $LiMn_{0.8}Fe_{0.2}PO_4/Li$ batteries with perspective in high energy density and safety.

• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.207-215
• /
• 1998

There have been many radiation measurement methods so far among which film dosimetry, TLD, and ion chamber are the most frequently used methods. But this study describes a new radiation measurement method which uses polymer gel and magnetic resonance imaging(MRI). The objective of this study is to fabricate a polymer gel sensitive to radiation and to generate a dose to MRI contrast relationship, and to apply this results to the radiation measurement for the brachytherapy. To do this, 12 cm diameter cylindrical gel phantom was made, and the phantom was irradiated using the 30 mm diameter circular collimator which was used for radiosurgery. And this irradiated phantom was scanned with MRI. To find out the relationship between the radiation dose and the transversal relaxation time, an image processing software(IDL) was used. From this study it is found out that the radiation dose showed linear relationship to the transversal relaxation time of the gel up to 17 Gy($R^2$=0.993) and they had a different relationship above 17 Gy. The dose distributions were calculated using these results for the Ir-192 sources, one for the HDR afterloading system and the other for a 2 mCi seed source. And these calculated dose distributions were compared to the ones from the treatment planning computers. From this study the dose to the irradiated gel's transversal relaxation time relationship was examined, and this result was tried for the measurement of the brachytherapy.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.117-121
• /
• 2001

White kidney bean, Phaseolus vulgaris, contains proteinaceous inhibitors of ${\alpha}-amylase$. Two inhibitors have been purified by conventional protein fractionation methods such as ethanol precipitation, ammonium sulfate fractionation, DEAE-Sephadex ion exchange chromatography and Sephadex G-100 gel chromatography. The inhibitors were purified as I-1 and I-2 based on their elution order from the DEAE-Sephadex column. The overall purification ratio were about 15.0 and 14.8 for I-1 and I-2, respectively. The molecular weights of purified ${\alpha}-amylase$ inhibitors were 50,000 and 45,000 determined by Sephadex G-100 gel filtration and SDS-polyacrylamide gel electrophoresis. They contain $17.6{\sim}17%$ of carbohydrate, $70{\sim}80%$ of protein. The carbohydrates were composed of glucose : xylose : mannose : N-acetylglucosamine (5 : 3 : 50 : 42).