• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.546-551
• /
• 1992

Reaction mechanism on the solvent extraction of nickel(Ⅱ) with N-benzylisonitrosoacetylacetone imine(HIAANB) was studied spectrophotometrically. Absorbance was measured by changing the ligand HIAANB concentration in the chloroform organic phase and the pH values in the agueous solution phase. From the absorbance data, the reaction rate was found to be the first order for HIAANB concentration and the inverse first one for [$H^+$]. The rate determining step of the extraction reaction and the rate equation are as follows; $Ni^{2+}$＋HIAANB ${\to}$ Ni-IAANB$^+$＋$H^+$ -d[Ni$^{2+}$] / dt = K'[Ni$^{2+}$][HIAANB]$_0$ / [H$^+$] Calibration curve for the spectrophotometric determination of nickel(Ⅱ) ion in the aqueous solution was linear below the concentration of 1.17 ppm at the optimum experimental condition. And the ligand-to-metal ratio, the relationship between extractability and pH of the aqueous phase, and the effect of diverse ion on the determination of nickel(Ⅱ) ion were examined.

• Journal of Powder Materials
• /
• v.30 no.1
• /
• pp.22-28
• /
• 2023

The global demand for raw lithium materials is rapidly increasing, accompanied by the demand for lithiumion batteries for next-generation mobility. The batch-type method, which selectively separates and concentrates lithium from seawater rich in reserves, could be an alternative to mining, which is limited owing to low extraction rates. Therefore, research on selectively separating and concentrating lithium using an electrodialysis technique, which is reported to have a recovery rate 100 times faster than the conventional methods, is actively being conducted. In this study, a lithium ion selective membrane is prepared using lithium lanthanum titanate, an oxide-based solid electrolyte material, to extract lithium from seawater, and a large-area membrane manufacturing process is conducted to extract a large amount of lithium per unit time. Through the developed manufacturing process, a large-area membrane with a diameter of approximately 20 mm and relative density of 96% or more is manufactured. The lithium extraction behavior from seawater is predicted by measuring the ionic conductivity of the membrane through electrochemical analysis.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.25 no.2
• /
• pp.108-119
• /
• 2012

Objectives: This study was performed to compare the differences between decoctions extracted by different extraction method and extraction time. Methods: Decoctions were prepared with pressurized or non-pressurized extraction for 60, 120 and 180min. The yield of extract, total soluble solid content, hydrogen ion concentration(pH) and the content of reference compound in Sipjeondaebo-tang (Siquandabu-tang) were investigated. Results: While yields and the total soluble solid of decoction were higher in pressurized method proportional to extraction time, pH values were lower in pressurized method and showed decreasing values with increasing extraction time. Albilflorin, ferulic acid, nodakenin, coumarin, cinnamaldehyde and glycyrrhizin were contained in decoctions by pressurized extraction method more than non-pressurized method whereas the content of coumarin was higher in decoctions by non-pressurized extraction method. In addition, coumarin was extracted increasingly with extraction time in decoctions by pressurized method, however, nine compounds except cinnamaldehyde showed the tendency of increasing proportional to extraction time. Conclusions: The results show that extraction methods including pressurized or non-pressurized extraction, and extraction time could affect the physicochemical characteristic or composition of Sipjeondaebo-tang(Siquandabu-tang) decoction.

• Applied Science and Convergence Technology
• /
• v.27 no.3
• /
• pp.47-51
• /
• 2018

We fabricated an anode-type ion beam source and studied its driving characteristics of the initial extraction of ions using two driving mechanisms: a diffusion phenomenon and a charge repulsion phenomenon. For specimen exposed to the ion beam in two methods, the surface impurity element was investigated by using X-ray photoelectron spectroscopy. Upon Ar gas injection for plasma generation the ion beam source was operated for 48 hours. We found a Fe 2p peak 5.4 at. % in the initial ions by the diffusion mechanism while no indication of Fe in the ions released in the charge repulsion mechanism. As for a long operation of 200 min, the temperature of ion beam sources was measured to increase at the rate of ${\sim}0.1^{\circ}C/min$ and kept at the initial value of $27^{\circ}C$ for driving by diffusion and charge repulsion mechanism, respectively. In this study, we confirmed that the ion beam source driven by the charge repulsion mechanism was very efficient for a long operation as proved by little electrode damage and thermal stability.

• YAKHAK HOEJI
• /
• v.13 no.1
• /
• pp.28-32
• /
• 1969

For the colorimetric determination of Sulfa-drugs by means of solvent extraction, the sample solutions were added into dimethylglyoxime-Fe(II) complex solution, and extracted with pyridine-chloroform mixture (1:50) is a range of pH 7.5-8.5. The extracted solution shows stability and maximum absorption at 402m${\mu}$.

• YAKHAK HOEJI
• /
• v.13 no.1
• /
• pp.22-27
• /
• 1969

Nicotinamide Complex Compound was not formed in simple alkaline solution under two to one molar ratio of dimethyglyoxime and Fe (II), but it was formed with ammonia or pyridine under the same molar ratio. Based on this fact, nicotinamide solution was added into dimethyglyoxime-Fe (II) complex solution, and the chelation product was extracted with chloroform. The extraction was Completed in a range of pH 8.4-11.0. The chloroform solution shows stability and maximum absorption at 516 m${\mu}$.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.12
• /
• pp.1256-1260
• /
• 1997

A series of acyclic polyethers bearing amide end-groups and lipophilic alkyl chains (3-5) were successfully synthesized with quantitative yields. Based upon the transport experiment in a bulk liquid membrane (BLM) system and solvent extraction, a very high selectivity of Pb2+ over other transition metal cations was observed. Measurement of thermodynamic parameters for complexation in methanol at 25 ℃ gave a strong evidence for excellent selective complexation for lead ion over other transition metal ions.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.2
• /
• pp.179-186
• /
• 1999

Several cholic acid derivatives containing 1-3 trifluoroacetylbenzoyl (TFAB) moieties were synthesized using selective acetylations, hydrolysis and/or oxidation of cholic acid derivatives and tested as receptors for a carbonate ion through solvent extraction method. The compounds having two and three TFAB moieties exhibited enhanced binding affinities toward a carbonate ion in comparison with those with one TFAB croup and the extent of complex formation also depended on the position of TFAB group attached.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.951-956
• /
• 1998

The beam extraction system for the KOMAC[1] (Korea Multi-purpose Accelerator Complex) project is to be designed to partially extract H￣ beam at both 100 and 260 MeV This paper describes a simulation study of charge changing extraction with a stripper magnet and a possible design of a H$^{0}$ extractor by utilizing the simulation study The method consists of converting the negative hydrogen (H￣) ion beam from the linac to a chosen intensity (0-100%) of neutral hydrogen (H$^{0}$ ) beam having an acceptable omittance and drifting it directly onto a stripper foil followed by a downstream beamline.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.219.3-219.3
• /
• 2003

We describe here solid-extraction and derivatisation methods of ${\beta}$-adrenoceptor blocking drugs used for the treatment of various cardiovascular disorders such as hypertension, angina pectoris and cardiac arrhythmia: propranolol, metoprolol, sotalol, timolol, oxprenolol, alpranolol, atenolol, pindolol. Solid-extraction and derivatisation methods are described involving the use of Bond Elut Certify cartridges, MSTFA and MBTFA. Gas chromatographic-mass spectrometry analysis(GC/MS) was carried out select-ion monitroing mode. (omitted)