• 한국표면공학회지
• /
• 제49권2호
• /
• pp.135-140
• /
• 2016

In this study, we prepared magnesium ion containing oxide films formed on the Ti-6Al-4V using plasma electrolytic oxidation (PEO) treatment. Ti-6Al-4V surface was treated using PEO in Mg containing electrolytes at 270V for 5 min. The phase, composition and morphology of the Mg ion containing oxide films were evaluated with X-ray diffraction (XRD), Attenuated total reflectance Fourier transform infrared (ATR-FTIR) and filed-emission scanning electron microscopy (FE-SEM) with energy dispersive X-ray spectrometer (EDS). The biocompatibility of Mg ion containing oxide films was evaluated by immersing in simulated body fluid (SBF). According to surface properties of PEO films, the optimum condition was formed when the applied was 270 V. The PEO films formed in the condition contained the properties of porosity, anatase phase, and near 1.7 Ca(Mg)/P ratio in the oxide film. Our experimental results demonstrate that Mg ion containing oxide promotes bone like apatite nucleation and growth from SBF. The phase and morphologies of bone like apatite were influenced by the Mg ion concentration.

• Bulletin of the Korean Chemical Society
• /
• 제17권9호
• /
• pp.794-798
• /
• 1996

Solid solutions of the nonstoichiometric Dy1-xSrxCoO3-y system with the compositions of x=0.00, 0.25, 0.50, 0.75, and 1.00 have been synthesized by the solid state reaction at 1000 ℃ under atmospheric air pressure. The crystallographic structures of the solid solutions are analyzed by the powder X-ray diffraction patterns at room temperature. The analyses assign the compositions of x=0.00 and 0.25 to the orthorhombic system with space group of Pbnm/D2h16, the compositions of x=0.50 and 0.75 to the tetragonal system like a typical SrCoO2.86, and the composition of x=l.00 or SrCoO2.50 to the brownmillerite type system with space group of I**a. The reduced lattice volumes increase with x value due to the larger radius of Sr2+ ion than that of Dy3+ ion. The mole ratio of Co4+ ion to total Co ion with mixed valence state between Co3+ and Co4+ ions at B sites or τ value has been determined by an iodometric titration. All the samples except for the DyCoO3 compound show the mixed valnce state and thus the composition of x=0.50 has the maximum τ value in the system. The oxygen vacancies increasing with x value are randomly distributed over the crystal lattice except for the composition of x=l.00 which have the ordering of the oxygen vacancies. The nonstoichiometric chemical formulas of the Dy1-xSrxCo3+1-τCo4+τO3-(x-τ)/2 system are formulated from the x, τ, and y values. The electrical conductivity in the temperature range of 100 to 900 K increases with τ value linearly because of positive holes of the Co4+ ions in π* band as a conducting carrier. The activation energy of the x=0.50 as Ea=0.17 eV is minimum among other compouds. Broad and high order transition due to the overlap between σ* and π* bands broadened by the thermal activation is observed near 1000 K and shows a low temperature-semiconducting behavior. Magnetic properties following the Currie-Weiss law show the low to high spin transition in the cobaltate perovskite. Especially, the composition of x=0.75 presents weak ferromagnetic behavior due to the Co3+-O2--Co4+ indirect superexchange interaction.

• 생물환경조절학회지
• /
• 제7권1호
• /
• pp.55-61
• /
• 1998

본 실험은 배양액 내의 황산이온이 참쑥(Artemisia mongolica var. tenuifolia)의 생육에 미치는 영향을 알아보고자 수행되었다. 황산이온은 0, 0.5, 1, 2, 3mM의 농도로 처리되었는데 양액은 벨기에의 채소연구소에서 허브용양액으로 개발된 양액조성을 변형하여 이용하였다. 참쑥의 생육은 일반적으로 3mM 처리에서 좋았으며 건물률 또한 3mM 처리에서 가장 좋았다. 배양액내의 황산이온 농도가 증가할수록 참쑥의 엽록소 함량은 증가하였는데 특히 엽록소 a의 함량이 b함량에 비해 증가의 폭이 컸다. 참쑥의 무기물 함량은 배양액내의 황산이온 농도와 유의성을 보이지 않았으나 조직내 Ca의 함량은 3mM 처리에서 급격히 감소하였다. 식물에 의한 황산이온의 흡수는 배양액내의 농도가 증가할수록 증가하였는데 2mM까지는 서서히 증가 하다가 3mM에서 현저하게 증가하였다. 1mM 황산이온 처리에서 정유의 함량은 가장 높았으나 그 이상으로 농도가 증가할 경우 정유의 함량은 오히려 감소하였다.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.40-48
• /
• 1995

$TiB_2$-TiN double-layer coating have been prepared by ion beam enhanced deposition. AES, XRD, TEM and HRTEM were employed to characterize the $TiB_2$ layer. The microhardness of the coatings was evaluated by an ultra low-load microhardness indenter system, and the tribological behavior was examined by a ball-on-disc tribology wear tester. It was found that in a single titanium diboride layer, the composition is uniform along the depth of the film, and it is mainly composed of nanocrystalline $TiB_2$ with hexagonal structure, which resulted from the ion bombardment during the film growth. The hardness of the $TiB_2$ films increases with increasing ion energy, and approaches a maximum value of the $TiB_2$ films increases with increasing ion energy, and approaches a maximum value of 39 Gpa at ion energy of 85 keV. The tribological property of the TiB2 films is also improved by higher energy of 85keV. The tribological property of the $TiB_2$ films is also improved by higher energy ion beam bombardment. There is no major disparity in the mechanical properties of double-layer $TiB_2$/TiN coatings and TiN/$TiB_2$ coatings. Both show an improved wear resistance compared with single-layer $TiB_2$ films. The adhesion of double-layer coatings is also superior to that of single-layer films.

• 한국인쇄학회지
• /
• 제14권2호
• /
• pp.37-49
• /
• 1996

The practical lith developer is a hydroquinone solution of moderate alkalinity and low free-sulfite ion concentration with potassium bromide as the restraining agent. In the study on composition of ilth developer to promote high sensitivity, high contrast and long term preservation or use, a new composition of lith developer, namely PK lith developer, was developed and of was found that PK lith developer was superior to the lith developer which was commercially available in terms of contrast, speed and preservation. This paper also describes studies on the addition of hdydrazine to PK lith developer, which have led to further improvements in the system.

• 약학회지
• /
• 제8권4호
• /
• pp.96-99
• /
• 1964

In the previous study, the composition ratios of the Cu-sulfa drugs complexes determined by gravimetric and solvent extraction method reported. In this paper, the continuous variations method has been used to know whether the complexes are simple complexes or chelates, and to recertify the composition ratios of the complexes at pH 7-8. It has been certified that the ratio of $Cu^{+2}$ ion to sulfa drugs in 1:2 from the result of this experiment.

• 한국세라믹학회지
• /
• 제38권11호
• /
• pp.993-999
• /
• 2001

Bao를 첨가한 perovskite 구조 LaSc $O_3$의 생성상과 proton 전도에 대해 연구하였다. La자리에 $Ba^{2+}$를 40 at% 첨가한 조성에서는 입방정 단일상이 생성된 반면, $Ba^{2+}$를 30 at% 이하로 첨가한 조성은 입방정과 사방정이 생성되었다. $N_2$분위기에서 $650^{\circ}C$ 이상의 온도에서는 주로 산소이온에 의한 전도를 나타내었고, 그 이하의 온도에서는 wet 분위기에서 proton 전도가 관찰되었다. 모든 조성의 물질은 30$0^{\circ}C$ 이하에서는 순수한 proton 전도체의 거동을 보였으며, proton에 의한 bulk(grain)의 전도도는 L $a_{0.6}$B $a_{0.4}$Sc $O_{2.8}$의 경우에 가장 높았다.높았다.다.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.545-552
• /
• 2022

Tin-antimony sulfide nanocomposites were prepared via hydrothermal synthesis and a N₂ reduction process for use as a negative electrode in a sodium ion battery. The electrochemical energy storage performance of the battery was analyzed according to the tin-antimony composition. The optimized sulfides exhibited superior charge/discharge capacity (770 mAh g^-1 at a current density of 100 mA g^-1) and stable lifespan characteristics (71.2 % after 200 cycles at a current density of 500 mA g^-1). It exhibited a reversible characteristic, continuously participating in the charge-discharge process. The improved electrochemical energy storage performance and cycle stability was attributed to the small particle size, by controlling the composition of the tin-antimony sulfide. By optimizing the tin-antimony ratio during the synthesis process, it did not deviate from the solubility limit. Graphene oxide also acts to suppress volume expansion during reversible electrochemical reaction. Based on these results, tin-antimony sulfide is considered a promising anode material for a sodium ion battery used as a medium-to-large energy storage source.

• 대한화학회지
• /
• 제7권1호
• /
• pp.6-12
• /
• 1963

Amino acid composition of Makjang was determined by combined usage of ion exchanged resin and paper chormatography in the following states. a. A fraction soluble in water b. Hydrolysate of the whole Makjang c. Same as a. (p.p.t. formed by tungstic acid or trichloroacetic acid being removed) d. Hydrolysate of c. (T and TCA) By comparing amino acid composition of Makjang with that of its raw material, we found that decomposition of essential amino acids during brewing is slight. From the amino acid composition of a,b,c,d, we discussed the ratio of amino acid liberation during brewing and assumed that Makjang contains peptide-like substances composing of glutamic acid and aspartic acid.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.76-76
• /
• 2012

Surface engineering of polymers has a broad array of scientific and technological applications that range from tissue engineering, regenerative medicine, microfluidics and novel lab on chip devices to building mechanical memories, stretchable electronics, and devising tunable surface adhesion for robotics. Recent advancements in the field of nanotechnology have provided robust techniques for controlled surface modification of polymers and creation of structural features on the polymeric surface at submicron scale. We have recently demonstrated techniques for controlled surfaces of soft and relatively hard polymers using ion beam irradiation and plasma treatment, which allows the fabrication of nanoscale surface features such as wrinkles, ripples, holes, and hairs with respect to its polymers. In this talk, we discuss the underlying mechanisms of formation of these structural features. This includes the change in the chemical composition of the surface layer of the polymers due to ion beam irradiation or plasma treatment and the instability and mechanics of the skin-substrate system. Using ion beam or plasma irradiation on polymers, we introduce a simple method for fabrication of one-dimensional, two-dimensional and nested hierarchical structural patterns on polymeric surfaces on various polymers such as polypropylene (PP), polyethylene (PE), poly (methyl methacrylate) PMMA, and polydimethylsiloxane (PDMS).