• Ocean and Polar Research
• /
• v.26 no.3
• /
• pp.433-438
• /
• 2004

Stress response to the seawater acclimation in coho salmon (Oncorhynchus kisutch) smolt was investigated. Salt concentration of rearing water was gradually increased for 3 days from freshwater to seawater (30 ppt salt level). The changes of serum concentrations of cortisol as a primary stress indicator, and as secondary indicators, glucose (GLC), lactate (LAC), triglyce.ide (TG), cholesterol (CHOL), sodium ion $(Na^+)$, chloride ion $(Cl^-)$ and enzyme activities (alanine aminotransferase, ALT: aspartate aminotrasferase, AST; lactate dehydrogenase, LDH) were quantified during the acclimation experiment. Among them, cortisol, LAC, TG, CHOL, ALT, AST concentrations showed rapid increase at the first exposure to the 10ppt salt level (day 1), and began to decrease to the constant values after day 2 of adaptation at 20ppt salt level. However, LDH concentration tended to decrease during the whole experimental period. $Na^+\;and\;Cl^-$ showed slight decrease at day 1, and increased to a little bit higher values after day 2 rather than those in freshwater. All the fishes started on taking a food after day 4 of seawater adaptation. From these results, to reduce osmotic shock inducible stress to fish in seawater acclimation, gradual increase of salt levels is recommended.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.667-672
• /
• 1991

Two palladium(Ⅱ) complexes, N-(2-aminoethylisonitrosobenzoylacetone imino) chloropalladium(Ⅱ), PdCl(IBA)-en, and N-(3-aminopropylisonitrosobenzoylacetone imino) chloropalladium(Ⅱ), PdCl (IBA)-tn, have been prepared from the condensation of isonitrosobenzoylacetone (IBA) and diamine (ethylenediamine(en) or trimethylenediamine(tn)) in the presence of palladium(Ⅱ) ion. It is suggested that the Schiff base formed by condensation of an isonitrosobenzoylacetone and a diamine coordinates to the metal through three nitrogens of isonitroso (=N-O), C=N, and $NH_2$groups as a tridentate ligand. And also a chloride ion coordinates to the metal in addition to the Schiff base ligand to form a square-planar geometry.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.73-80
• /
• 2020

In order to develop a process for the recovery of valuable metals from spent LiBs, solvent extraction experiments were performed to separate Cu(II) and/or Co(II) from synthetic hydrochloric acid solutions containing Li(I), Mn(II), and Ni(II). Commercial amines (Alamine 336 and Aliquat 336) were employed and the extraction behavior of the metals was investigated as a function of the concentration of HCl and extractants. The results indicate that HCl concentration affected remarkably the extraction efficiency of the metals. Only Cu(II) was selectively at 1 M HCl concentration, while both Co(II) and Cu(II) was extracted by the amines when HCl concentration was higher than 5 M, leaving the other metal ions in the raffinate. Therefore, it was possible to selectively extract either Cu(II) or Co(II)/Cu(II) by adjusting the HCl concentration.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.798-803
• /
• 2018

In order to use Si as an anode material for lithium-ion battery, the particle size was controlled to less than $0.5{\mu}m$ and carbon was coated on the surface with the thickness less than 10 nm. The carbon fiber was grown on the Si surface with 50~150 wt%, and the carbon coating was carried out once again. The Si composite material was mixed with dissimilar metals to increase the conductivity, and graphite was mixed to improve cyclic life characteristics. The physical and electrochemical characteristics of composite materials were measured with XRD, SEM, TEM and coin cell. The discharge capacity of Si/PC/CNF/PC was lower than that of Si/PC (Pyrolytic Carbon)/CNF (Carbon Nano Fiber). However, the cyclic life of Si/PC/CNF/PC was higher. Initial discharge capacity of 1512 mA h g-1 at 0.2 C rate and initial efficiency of 78% were shown. It also showed a capacity retention of 94% in 10 cycles.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.21-28
• /
• 2022

The smelting reduction of spent lithium-ion batteries results in metallic alloys of cobalt, nickel, and copper. To develop a process to separate the metallic alloys, leaching of the metallic mixtures of these three metals with H₂SO₄ solution containing 3% H₂O₂ dissolved all the cobalt and nickel, together with 9.6% of the copper. Cyanex 301 selectively extracted Cu(II) from the leaching solution, and copper ions were completely stripped with 30% aqua regia. Selective extraction of Co(II) from a Cu(II)-free raffinate was possible using the ionic liquid ALi-SCN. Three-stage cross-current stripping of the loaded ALi-SCN by a 15% NH₃ solution resulted in the complete stripping of Co(II). A process was proposed to separate the three metal ions from the sulfuric acid leaching solutions of metallic mixtures by employing solvent extraction.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.35-43
• /
• 2022

The aim of this work was to a comparative review the performance of high calcium silicate cement (HSCSC) and that of ordinary Portland cement(OPC) and blast furnace slag cement(S/C). The result of the compressive test confirmed that the compressive strength development rate of high calcium silicate cement concrete at the age of 3 days was 73.6% that of ordinary Portland cement concrete. However, at the age of 28 days, the strength development rate of high calcium silicate cement increased to about 107.0% compared to ordinary Portland cement. In addition, the test of the chloride ion penetration resistance of concrete showed that at the age of 28 days, the passed charge decreased by 73.4% and 93.0%, respectively, in blast furnace slag cement and high calcium silicate cement compared to ordinary Portland cement, and at the age of 56 days, it decreased by 79.1% and 98.3%, exhibiting excellent resistance to chloride ion penetration. In particular, it was confirmed that the rate of decrease in the passed charge with age was higher in high calcium silicate cement than in ordinary Portland cement and blast furnace slag cement.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.61-64
• /
• 1977

Fluoride analysis using fluoride specific ion electrode has been carried out from sea water samples at 15 stations in the west coast of Korea. The concentration was varied from 0.83 to 1.00 ppm; ratio to chlorinity ranged from 4.60 to $5.48\times10^{-5}$. There was a tendency that the ratio to chlorinity was increased with the depth. In general the concentration was less than that of other seas.

• Journal of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.119-122
• /
• 1970

In those six kinds of diamine salt crystal of which their structures had already been determined up to date, commonly one molecule of diamine and two molecules of acid were combined; although the crystal of benzidine perchlorate, only one molecule each of benzidine and perchloric acid were combined. At the case of benzidine perchlorate, one molecule acts as the role of two molecules by coincidence of the center of symmetry point of both the lattice and molecule, and perchlorate ion is locating symmetrically between two -$NH_2$ groups of different benzidine molecule, therefore benzidine and acid could be combined together with 1:1 by mole ratio. When forming the salt with diamine and acid, the combining mole ratio would be determined in accordance with the relationship between the symmetry element that presented by the space group and the symmetry element of diamine salt melecule.

• Journal of Information Display
• /
• v.2 no.4
• /
• pp.1-7
• /
• 2001

This paper investigates the characteristics of a newly developed high density hollow cathode plasma(HCP) system and its application for the etching of silicon wafers. We used $SF_6$ and $O_2$ gases in the HCP dry etch process. This paper demonstrates very high plasma density of $2{\times}10^{12}cm^{-3}$ at a discharge current of 20 rna, Silicon etch rate of 1.3 ${\mu}m$/min was achieved with $SF_6/O_2$ plasma conditions of total gas pressure of 50 mTorr, gas flow rate of 40 seem, and RF power of200W. This paper presents surface etching characteristics on a crystalline silicon wafer and large area cast type multicrystlline silicon wafer. We obtained field emitter tips size of less than 0.1 ${\mu}m$ without any photomask step as well as with a conventional photolithography. Our experimental results can be applied to various display systems such as thin film growth and etching for TFT-LCDs, emitter tip formations for FEDs, and bright plasma discharge for PDP applications. In this research, we studied silicon etching properties by using the hollow cathode plasma system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.2
• /
• pp.87-91
• /
• 2013

The crystal structure of partially dehydrated fully $Zn^{2+}$-exchanged zeolite Y was determined by X-ray diffraction techniques in the cubic space group $Fd\bar{3}m$ at 294(1) K and refined to the final error indices $R_1/wR_2$ = 0.035/0.119 for $|Zn_{35.5}(H_2O)_{13}|[Si_{121}Al_{71}O_{384}]$-FAU. About 35.5 $Zn^{2+}$ ions per unit cell are found at six distinct positions; sites I, I', a second I', II', II, and a second II. In sodalite cavities, the 11 water molecules coordinate to Zn(I'b) and/or Zn(II') ions; each of two $H_2O$ bonds to a Zn(IIb) in supercages. Two different $Zn^{2+}$ positions near 6-oxygen ring are due to their Si-Al ordering in tetrahedral site by Si/Al ratio leading to the different kinds of 6-rings.