• Korean Journal of Veterinary Service
• /
• v.19 no.2
• /
• pp.172-179
• /
• 1996

This study was to investigate the properties such as amounts of moisture, inverted sugar, cane sugar and 5-(hydroxymethyl)-2-furfural (HMF) in feeding-honey(n=45) and wild-honey (n=3) harvested in Chonbuk area from April to November 1995. The results obtained were summarized as follows ; The average percentages of moisture in both feeding- and wild-honey was 20.2%(range, 17.5~23.1) and 20.7%(19.4~22.2). And those of inverted sugar/cane sugar in both honeies were 64.4%(55.8~69.3)/6.8%(1.0~l5.7) and 68.9%(68.5~69.8)/3.1%(2.5~3.7), in seasonal analysis those were 65.9%/5.3% in spring, 65.7%/6.6% in summer, 62.1%/8.0% in autumn, respectively. On the other hand, the average amounts of HMF in both honeies were 44.86mg/kg(22.6~68.6) and 7.0mg/kg(6.2~7.6), its average difference between both honeies were about 37.86mg/kg regardless of region and season.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.41-50
• /
• 2014

The purpose of this study is to evaluate the High Rate Spiral Clarifier(HRSC) availability for the improvement of polluted retention pond water quality. A lab scale and a pilot scale test was performed for this. The fluid flow patterns in a HRSC were studied using Fluent which is one of the computational fluid dynamic(CFD) programs, with inlet velocity and inlet diameter, length of body($L_B$) and length of lower cone(Lc), angle and gap between the inverted sloping cone, the lower exit hole installed or not installed. A pilot scale experimental apparatus was made on the basis of the results from the fluid flow analysis and lab scale test, then a field test was executed for the retention pond. In the study of inside fluid flow for the experimental apparatus, we found out that the inlet velocity had a greater effect on forming spiral flow than inlet flow rate and inlet diameter. There was no observable effect on forming spiral flow LB in the range of 1.2 to $1.6D_B$(body diameter) and Lc in the range of 0.35 to $0.5L_B$, but decreased the spiral flow with a high ratio of $L_B/D_B$ 2.0, $Lc/L_B$ 0.75. As increased the angle of the inverted sloping cone, velocity gradually dropped and evenly distributed in the inverted sloping cone. The better condition was a 10cm distance of the inverted sloping cone compared to 20cm to prevent turbulent flow. The condition that excludes the lower exit hole was better to prevent channeling and to distribute effluent flow rate evenly. From the pilot scale field test it was confirmed that particulate matters were effectively removed, therefore, this apparatus could be used for one of the plans to improve water quality for a large water body such as retention ponds.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.603-609
• /
• 1987

The clinical, investigative, and surgical experiences were reviewed in four patients with congenitally corrected transposition of the great arteries who presented to the National Medical Center between August 1983 and August 1985. This condition is very rare congenital anomaly defined as the combination of atrioventricular discordance and transposition of the great arteries. Examples of primitive [single] ventricle inverted [that is, left sided in situs solitus] with outflow chamber were excluded in this paper. According to the sequential arrangement of the hearts there were two cases of [S,L,L] and two cases of [I,D,D]. The surgical approach should be focused on minimizing the risk of heart block and increasing the degree of relief of pulmonary outflow tract obstruction [POTO]. We experienced complete heart block in two cases of [S,L,L] and significant residual POTO in one case of [S,L,L] and one case of [I,D,D] postoperatively. There were one hospital mortality caused by complete heart block and residual POTO and two delayed mortalities caused by congestive heart failure and sepsis respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.242-250
• /
• 2004

In this thesis, a new broadband PIFA(Planar Inverted-F Antenna) for PCS and IMP-2000 applications is designed. The dual-L antenna structure is adopted in order to improve the characteristics of PIFA which usually has a narrow band. The height of the antenna is fixed 6 mm considering terminal's thickness and the structure is deformed into the folded radiation patches to minimize the size of the antenna. The bandwidth of a realized antenna is 1.66∼2.35 ㎓(34.5 %) fur return loss below -10 ㏈ which contain the required bandwidth of PCS and IMT-2000. And Monopole antenna with λ/4 length is designed and compared with dual-L with folded patch in SAR. 1 g and 10 g averaged peak SAR of PIFA are about 25.7 %, 30.3 % lower than those of monopole antenna respectively.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.205-209
• /
• 2003

Recently, we introduced a new method for rapid screening of bacterial species- or subspecies-specific DNA probes, named “inverted dot blot hybridization screening method”. We then applied this method to develop species- or strain- specific DNA probes for Prevotella intermedia and Prevotella nigrescens. In those studies, among 96 candidate DNA probes which were screened by the new method, 5 probes were confirmed as being putatively strain-specific : 3 probes for P. nigrescens 9336 (ATCC 33563), one for each p. intermedia ATCC 25611 and one for P. nigrescens G8-9K-3 (ATCC 49046). In the present study, we evaluated by Southern blot analysis a DNA probe Pi29-L, one of the 96 candidate probes described above, whether it is specific for the strain ATCC 25611 off. intermedia. Our data show that the probe Pi29-L is potentially P. intermedia ATCC 25611-specific, which can be useful for the detection and identification of the strain, particularly in maintenance of the strain.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.490-495
• /
• 2016

In the present study, a microstrip-fed monopole antenna is proposed for wireless local area network (WLAN) operations which cover dual band of 2.4 GHz (2.4 ~ 2.484 GHz) and 5 GHz (5.15 ~ 5.825 GHz). In order to obtain its compact structure and good omnidirectional radiation patterns, a modified inverted L-shaped slot separated from ground for impedance matching in 5 GHz band is etched on 2.4 GHz printed monopole antenna. The proposed antenna is designed and fabricated on a FR4 substrate with dielectric constant 4.3, thickness of 1.6 mm, and size of $30{\times}45mm^2$. The measured impedance bandwidths (${\mid}S_{11}{\mid}{\leq}-10dB$) of fabricated antenna are 270 MHz (2.22 ~ 2.48 GHz) in 2.4 GHz band and 890 MHz (5.08 ~ 5.97 GHz) in 5 GHz band respectively. In particular, high gain of more than about 4 dBi and good omnidirectional radiation patterns have been observed over the entire frequency band of interest.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.6
• /
• pp.332-336
• /
• 2012

Objectives: This study sought to evaluate fixation methods and determine the best method for the postoperative stabilization of maxillary osteotomy. For our analysis we performed a three-dimensional finite element analysis of stress distribution on the plate, screw, and surrounding bone, as well as displacement onto the plate. Materials and Methods: We generated a model using synthetic skull scan data; an initital surface model was changed to a solid model using software. Modified anterior segmental osteotomy (using Park's method) was made using the program, and four different types of fixation methods were used. An anterior load of 100 N was applied on the palatal surface of two central incisors. Results: The Type 1 (L-shaped) fixation method gave stresses of 187.8 MPa at the plate, 45.8 MPa at the screw, and 15.4 MPa at the bone around the plate. The Type 2 (I-shaped) fixation method gave stresses of 186.6 MPa at the plate, 75.7 MPa at the screw, and 13.8 MPa at the bone around the plate. The Type 3 (inverted L-shaped) fixation method gave stresses of 28.6 MPa at the plate, 29.9 MPa at the screw, and 15.3 MPa at the bone around the plate. The Type 4 (I-shaped) fixation method gave stresses of 34.8 MPa at the plate, 36.9 MPa at the screw, and 14.9 MPa at the bone around the plate. The deflection of the plates for the four fixation methods was 0.014 mm, 0.022 mm, 0.017 mm, and 0.018 mm, respectively. Conclusion: The Type 3 (inverted L-shaped) fixation method offers more stability than the other fixation methods. We therefore recommend this method for the postoperative stabilization of maxillary osteotomy.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.71-71
• /
• 2019

The genus Cenchrus (Poaceae), containing ca. 23 species, is distributed throughout Australia, Africa, Indian sub-continent, and America. In Korea, Cenchrus longispinus (Hack.) Fernald, especially introduced to Daecheong Island in 1999, is one of the most hazardous invasive plant which causes serious environmental threats, biodiversity damages and physically negative impact on humans and animals. Based on the next-generation sequencing (NGS) technology, we characterized the chloroplast (cp) genome sequences of C. longispinus which contains a large single copy (LSC; 80,223 bp), a small single copy (SSC; 12,449 bp), separated by a pair of inverted repeats (IRs; 22,236 bp). Additionally, we analyzed the cp genome sequences of Cenchrus echinatus L. which contains a large single copy (LSC; 80,220 bp), a small single copy (SSC; 12,439 bp), separated by a pair of inverted repeats (IRs; 22,236 bp). These cp genomes consist of 75 unique genes, 4 rRNA coding genes, 33 tRNA coding genes and 21 duplicated in the IR regions, of which the gene content and organization are similar to the other Poaceae cp genomes. We selected 40 potential regions in cp genomes of two Cenchrus species and one Korean Pennisetum species to develop new single nucleotide polymorphism (SNP) markers for identifying C. longispinus based on amplification-refractory mutation system (ARMS) technique. The markers, inferred from SNP in matK and ndhF genes, show effectiveness to recognize C. longispinus from C. echinatus and Korean native species Pennisetum alopecuroides (L.) Spreng.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1600-1603
• /
• 2009

In this work, we have fabricated inverted staggered ZnO TFTs with 1-${\mu}m$ resolution channel length by micro contact printing (${\mu}$-CP) method. Patterning of micro scale source/drain electrodes without etching is successfully achieved by micro contact printing method by using silver ink and polydimethylsiloxane (PDMS) stamp. And the time dependent characteristics of the sheet resistance show that Ag inklayer could be used as source and drain electrodes for ZnO TFTs.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.11a
• /
• pp.84-85
• /
• 2004

Experimental study was conducted to characterize shear-induced lateral migration of $1.0-{\mu}m-diameter$ Brownian particles flowing through a rectangular microchannel which can be used to deliver small amount of liquids, drugs, biological agents and particles in microfluidic devices. Measurements were obtained by using a mercury lamp with a light of 532-nm wavelength, an inverted epi-fluorescence microscope, and a cooled CCD camera to record particle images. Peclet number was used as a parameter to assess the lateral distribution of the particles at a fixed volume fraction of $0.1\%$. It was shown that as Pe increased, particles were moved toward the centerline of the channel, which is in good agreement with previous studies.