• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.118-123
• /
• 2001

Most structures of automobile are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic farces for the evaluations of fatigue life and stress concentration exactly. It is rarely obtained the accurate load history of specified positions because of the errors such as modeling, measurement, and etc. In the beginning of design, exact load data are actually necessary for the fatigue strength and life analysis to minimize the cost and time of designing. In this paper, the procedure of practical dynamic load determination is developed by the combination of the principal stresses of F.E. analysis and experiment. Inverse problem and least square pseudo inverse matrix are adopted to obtain an inverse matrix of analyzed stresses matrix. Pseudo-Practical dynamic load was calculated for Lab. Test of sub-structure. GUI program(PLODAS) was developed for whole of above procedure. This proposed method could be extended to any geometric shape of structure.

• 대한의용생체공학회:의공학회지
• /
• 제25권4호
• /
• pp.301-307
• /
• 2004

보행 중 각 관절의 모멘트를 계산하기 위한 역동역학 모델을 개발하였다. 모델은 1개의 상체와 3개의 체절로 하지를 구성하였고 3개의 병진 조인트와 12개의 회전조인트로 각 체절을 연결하고 뉴턴-오일러 방법으로 역동역학 해를 구하였다. 입력자료로서의 기구학적 사료는 3차원 동작분석 시스템에서 추출하였고 외력으로서 지면 반발력은 동기화한 힘측정판에서 구했다. 개발된 모델을 이용하여 비대칭 모델이나 질량중심의 이동을 포함한 해석 등 다양한 인체운동 해석이 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2188-2190
• /
• 2004

This paper presents an implementation of power system stabilizer using inverse dynamic neuro controller. Traditionally, mutilayer neural network is used for a universal approximator and applied to a system as a neuro-controller. In this case, at least two neural networks are used and continuous tuning of neuro-controller is required. Moreover, training of neural network is required considering all possible disturbances, which is impractical in real situation. In this paper, Taylor Model Based Inverse Dynamic Neuro Model (TMBIDNM) is introduced to avoid this problem. Inverse Dynamic Neuro Controller (IDNC) consists of TMBIDNM and Error Reduction Neuro Model (ERNM). Once the TMBIDNM is trained, it does not require retuning for cases with other types of disturbances. The controller is tested for one machine and infinite-bus power system for various operating conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.881-886
• /
• 2004

This paper presents the inverse dynamic analysis of the wheel loader manipulator based on the experimental data. A three dimensional rigid multi-body model of the wheel loader manipulator was built up. The inverse dynamic analysis for the typical operation mode was carried out by the ADAMS program. In order to verify the analysis result with the measured one, the hydraulic pressure and displacements of the cylinders were measured and the inverse dynamic analysis was carried out using experimental data. From the results of the analysis and measurement, it was concluded that the computational driving force showed good agreement with the measured one.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.133-144
• /
• 2000

The dynamic walking planning and the inverse dynamics of the biped robot is investigated in this paper. The biped robot is modeled with 14 degrees of freedom rigid bodies considering the walking pattern and kinematic construction of humanoid. The method of the computer aided multibody dynamics is applied to the dynamic analysis. The equations of motion of biped are initially represented as terms of the Cartesian corrdinates then they are converted to the minimum number of equations of motion in terms of the joint coordinates using the velocity transformation matrix. For the consideration of the relationships between the ground and foot the holonomic constraints are added or deleted on the equations of motion. the number of these constraints can be changed by types of walking patterns with three modes. In order for the dynamic walking to be stabilizable optimized trunk positions are iteratively determined by satisfying the system ZMP(Zero Moment Point) and ground conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.548-555
• /
• 2000

The dynamic walking and the inverse dynamics of the biped walking robot is investigated in this paper. The biped robot is modeled with 14 degrees of freedom rigid bodies considering the walking pattern and kinematic construction of humanoid. The method of the computer aided multibody dynamics is applied to the dynamic analysis. The equations of motion of biped are initially represented as terms of the Cartesian coordinates, then they are converted to the minimum number of equations of motion in terms of the joint coordinates using the velocity transformation matrix. For the consideration of the relationships between the ground and foot, the holonomic constraints are added or deleted on the equations of motion. The number of these constraints can be changed by types of walking pattern with three modes. In order for the dynamic walking to be stabilizable, optimized trunk positions are iteratively determined by satisfying the system ZMP(Zero Moment Point) and ground conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.561-565
• /
• 2000

This paper deals with dynamic walking and inverse dynamic analysis of the IWR biped walking robot. The system has nine bodies of the multibody dynamics. and all of the .joints of them are made up of the revolute joints at first. The problem of redundant constraint in double support phase is solved by changing the type of the joints considering kinematic relation. To make sure of its dynamic walking, the movement of balancing weight is determined by which satisfies not only the condition of ZMP by applying the principle of D'Alembert but also the contact condition of the ground. The modeling of IWR and dynamic walking are realized using DADS.

• 전력전자학회논문지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2008

상태 공간 평균화법을 이용하여 절연형 inverse-SEPIC(Isolated Inverse-SEPIC)의 동적 모델링을 정립하고, 그 제어특성을 해석한다. 정상 상태 해석을 통해 회로의 주요 소자들에 대한 설계식을 유도한다. 근 궤적과 주파수 해석을 통해 II-SEPIC의 동특성 및 제어 특성을 파악하여, 적절한 제어성능을 가지는 제어기를 설계한다. 본 논문에서 제시하는 방법에 따라 설계된 II-SEPIC의 회로파라미터 및 전압제어기를 포함한 전체 제어시스템의 시뮬레이션과 실험을 수행한다. 시뮬레이션과 실험결과는 논문에서 제시한 모델링 및 제어기 설계방법의 타당성 및 유용성을 확인시켜 주고 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권3호
• /
• pp.286-286
• /
• 1996

A neural predictive tracking system for the control of structure-unknown dynamic system is presented. The control system comprises a neural network modelling mechanism for the the forward and inverse dynamics of a plant to be controlled, a feedforward controller, feedback controller, and an error prediction mechanism. The feedforward controller, a neural network model of the inverse dynamics, generates feedforward control signal to the plant. The feedback control signal is produced by the error prediction mechanism. The error predictor adopts the neural network models of the forward and inverse dynamics. Simulation results are presented to demonstrate the applicability of the proposed scheme to predictive tracking control problems.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권3호
• /
• pp.154-161
• /
• 1996

A neural predictive tracking system for the control of structure-unknown dynamic system is presented. The control system comprises a neural network modelling mechanism for the the forward and inverse dynamics of a plant to be controlled, a feedforward controller, feedback controller, and an error prediction mechanism. The feedforward controller, a neural network model of the inverse dynamics, generates feedforward control signal to the plant. The feedback control signal is produced by the error prediction mechanism. The error predictor adopts the neural network models of the forward and inverse dynamics. Simulation results are presented to demonstrate the applicability of the proposed scheme to predictive tracking control problems.