• 재활복지공학회논문지
• /
• 제7권1호
• /
• pp.21-27
• /
• 2013

수동 휠체어의 추진은 추진 동작의 낮은 효율로 인하여 사용자의 상지 관절에 고통과 부상까지 유발할 수 있다. 이에 따라 수동 휠체어 추진 중에 발생하는 상지 관절의 운동역학적 해석이 필요하다. 본 연구에서는 수동 휠체어 추진 중 상지 관절에 작용하는 토크를 구할 수 있는 2차원 역동역학 모델을 개발하였다. 개발한 모델은 시상면에서 상완, 하완, 손에 해당하는 3개의 체절로 상지를 구성하였고 몸통으로부터 3개의 체절을 회전조인트로 연결한 개방연쇄구조를 갖는다. 역동역학 해는 뉴턴-오일러 방법으로 구하였고 요구되는 입력자료는 실험을 통하여 획득하였다. 수동 휠체어 추진에 필요한 상지 거동의 운동학적 자료는 3차원 동작분석 시스템에서 추출하였고 역동역학 모델의 외력에 해당하는 운동역학적 자료는 브레이크식 다이나모미터에서 추출하였다. 역동역학 모델을 이용한 해석을 통하여 수동 휠체어 추진에 따른 상지 관절의 회전각과 관절 토크를 구하였다. 개발된 모델은 상지 관절에 관한 생체역학적 해석 도구이며 적은 노력으로 3차원 역동역학 모델로 확장하는 토대가 된다.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.106-113
• /
• 2004

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic forces for the evaluations of fatigue life and stress concentration exactly. In this study, the dynamic response of vehicle structure to external forces is classified an inverse problem involving strains from the experiment and the analysis. The practical dynamic forces are determined by the combination of the analytical and experimental method with analyzed strain by quasi-static finite element analysis under unit force and with measured strain by a strain gage under driving load, respectively. In a stressed body, inter-molecular chemical bonds are failed beyond the certain magnitude. The failure of molecular structure in material is considered as a time process of which rate is determined by mechanical stress. That is, the failure of inter-molecular chemical bonds is the fatigue lift of material. This kinetic concept is expressed as lethargy coefficient. And S-N curve is obtained with the lethargy coefficient from quasi-static tensile test. Equivalent practical dynamic force is obtained from the identification of practical dynamic force for one loading point. Using the practical dynamic force and S-N curve, fatigue life of a window pillar is analyzed with FEM under the identified force by the procedure of above mentioned.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.711-716
• /
• 2003

This paper presents the inverse dynamic analysis of the hydraulic excavator manipulator based on the experimental data. A three dimensional rigid multi-body model of the hydraulic excavator manipulator was built up. Inverse dynamic analysis for typical operation mode was carried out by the ADAMS program. In order to verify the analysis results with the measured, the hydraulic pressure and displacement of the cylinders were measured and the dynamic analysis was carried out using experimental data. From the results of the cylinder driving forces, good agreements are obtained between the analysis and the measurement.

• 한국공간구조학회논문집
• /
• 제4권1호
• /
• pp.39-48
• /
• 2004

Generally, a structural system with large inextensional deformations, or in other words, non-strained deformation is called as 'Unstable Structure', Truss-linked structures, cable structures, membrane structures and movable structures as foldable space structures etc, are included in this category. In this paper, a dynamic analysis method for unstable structural systems is presented. Governing equations for dynamic analysis of unstable truss structures with inextensional displacements are derived. Because of singularity of inverse matrixin in practical analysis of unstable structure, the generalized inverse matrix is Introduced to resolve the singular problem. Also, the RREF technique is used to get the inextensional displacement mode. Two unstable truss structures are analyzed by using presented method. Damping is not considered. From the given results, it is known that proposed method is useful to figure out the dynamic behavior of unstable truss structures.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 춘계학술대회 논문집(Proceeding of the KOSME 2000 Spring Annual Meeting)
• /
• pp.6-10
• /
• 2000

In this paper a methodology for designing a controller based on inverse dynamics for speed control of DC motors is presented. The proposed controller consists of a low-pass prefilter the inverse dynamic model of a system and the PI controller. The low-pass prefilter prevents high frequency effects from the inverse dynamic model. The model is characterized by a nonlinear friction model. The PI controller regulates the error between the set-point and the system output which is caused by modeling error disturbances and variations f parameters. The parameters of the model and the PI controller are optimized offlinely by genetic algorithm. The experimental results on a DC motor system illustrate the performance of the proposed controller.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.97-102
• /
• 2000

In this paper, a methodology for designing a controller based on inverse dynamics for speed control of DC motors is presented. The proposed controller consists of a prefilter, the inverse dynamic model of a system and the PI controller. The prefilter prevents high frequency effects from the inverse dynamic model. The model of the system in characterized by a nonlinear equation with coulomb friction. The PI controller regulates the error between the set-point and the system output which may be caused by modeling error, variations of parameters and disturbances. The output which may be caused by modeling error, variations of parameters and disturbances. The parameters of the model and the PI controller are adjusted offlinely by a genetic algorithm. An experimental work on a DC motor system is carried out to illustrate the performance of the proposed controller.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.352-360
• /
• 1997

An inverse dynamic procedure for spatial multibody systems containing flexible bodies is developed in the relative joint coordinate space. Constraint acceleration equations are derived in terms of relative coordinates using the velocity transformation technique. An inverse velocity transformation operator, which transforms the Cartesian velocities to the relative velocities, is derived systematically corresponding to the types of kinematic joints connecting the bodies and the system reference matrix. Using the resulting matrix, the joint reaction forces and moments are analyzed in the Cartesian coordinate space. The formulation is illustrated by means of two numerical examples.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.138-138
• /
• 2000

In this paper, a methodology for designing a controller based on inverse dynamics for speed control of DC motors is presented. The proposed controller consists of a prefilter, the inverse dynamic model of a system and a fuzzy logic controller. The prefilter prevents high frequency effects from the inverse dynamic model. The model of the system is characterized by a nonlinear equation with coulomb friction. The fuzzy logic controller regulates the error between the set-point and the system output which may be caused by disturbances and it simultaneously traces the change o( the reference input. The parameters of the model are estimated by a genetic a]gorithm. An experimental work on a DC motor system is carried out to illustrate the performance of the proposed controller

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.693-698
• /
• 2001

The analysis of actuating forces (or torques) and joint reaction forces (or moments) are essential to determine the capacity of actuators, to control the system and to design the components. This paper presents an inverse dynamic analysis algorithm for flexible multibody systems with closed-loops in the relative joint coordinate space. The joint reaction forces are analyzed in Cartesian coordinate space using the inverse velocity transformation technique. The joint coordinates and the deformation modal coordinates are used as the generalized coordinates of a flexible multibody system. The algorithm is verified through the analysis of a slider-crank mechanism.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3741-3747
• /
• 1996

This paper presents a method for the inverse dynamic anlaysis of mechanical systems. Actuating forces(or torques) depending on the driving constraints are analyzed in the relative coordinate space using the velocity transformation technique. A systematic method to compose the inverse velocity transformation matrix, which is used to determine the joint reaction forces, is proposed. Two examples are taken to verify the method developed here.