• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.163-168
• /
• 1998

Extracting a Digital Elevation Model (DEM) from spaceborne imagery is important for cartographic applications of remote sensing data. The procedure for such DEM generation can be divided into stereo matching, sensor modelling and DEM interpolation. Among these, DEM interpolation contributes significantly to the completeness and accuracy of a DEM and, yet, this technique is often considered "trivial". However, na\ulcornere DEM interpolation may result in a less accurate and sometimes meaningless DEM. This paper reports the performance analysis of various DEM interpolation techniques. Using a manually derived DEM as reference, a number of sample points were created randomly. Different interpolation techniques were applied to the sample points to generate DEMs. The performance of interpolation was assessed by the accuracy of such DEMs. The results showed that kriging gave the best results at all times whereas nearest neighborhood interpolation provided a fast solution with moderate accuracy when sample points were large enough.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권3호
• /
• pp.213-223
• /
• 2013

A unified channel thermal noise model valid in all operation regions is presented for short channel MOS transistors. It is based on smooth interpolation between weak and strong inversion models and consistent physical model including velocity saturation, channel length modulation, and carrier heating. From testing for noise benchmark and comparing with published noise data, it is shown that the proposed noise model could be useful in simulating the MOSFET channel thermal noise in all operation regions.

• 전자공학회논문지S
• /
• 제35S권11호
• /
• pp.116-122
• /
• 1998

본 논문에서는 원영상이 가지고 있는 고주파 성분을 효율적으로 복원할 수 있는 공간 적응적 영상보간(image interpolation) 알고리듬을 제안한다. 영상이 갖고 있는 선험적 정보(a priori knowledge)를 보간 과정에 적용하기 위해서는, 우선 저해상도의 영상 시스템을 나타내는 분리 가능한(separable) 2차원 열화모델(degradation model)을 결정한다. 이렇게 결정된 열화 모델에 따라 다섯 가지의 서로 다른 제약 조건들을 사용하여 정칙화에 기반을 둔 공간 적응적 영상보간 알고리듬을 제안한다. 또한, 제안된 알고리듬의 수렴성을 분석하고, 실험 결과를 토대로 비적응적인 방법과 제안된 알고리듬의 성능을 비교한다.

• 한국측량학회지
• /
• 제21권2호
• /
• pp.131-136
• /
• 2003

지형의 기복변화를 수치적으로 표현하는 수치표고모델에서 보간 기준점의 선정방법은 매우 중요하다. 하지만 아직까지 정확한 기준이 정해진 것 없이 사용자가 임의로 선정하여 보간을 수행하고 있는 실정이다. 본 연구에서는 수치표고모델을 보다 정확하고 효과적으로 구축하기 위한 보간 기준점 선정방법을 연구하였다. 점의 수를 적용한 선정 방법과 비정규적으로 분포되어 있는 점들을 정규 격자형태로 가정하고 구한 점들간의 평균거리를 적용한 기준점 선정 방법이 분석되었다. 그 결과 점들간 평균거리를 적용한 크리깅 방법이 수치표고모델을 구축하는데 보다 효과적인 방법임을 알 수 있었다.

• Journal of the Korean Statistical Society
• /
• 제29권4호
• /
• pp.455-471
• /
• 2000

A new method is developed for estimating the mean of a population which has a linear trend. The proposed estimator is based on the balanced systematic sampling method and the concept of interpolation. The efficiency of the proposed method is compared with that of existing methods.

• 치과방사선
• /
• 제28권2호
• /
• pp.387-413
• /
• 1998

Image resampling is of particular interest in digital radiology. When resampling an image to a new set of coordinate, there appears blocking artifacts and image changes. To enhance image quality, interpolation algorithms have been used. Resampling is used to increase the number of points in an image to improve its appearance for display. The process of interpolation is fitting a continuous function to the discrete points in the digital image. The purpose of this study was to determine the effects of the seven interpolation functions when image resampling in digital periapical images. The images were obtained by Digora, CDR and scanning of Ektaspeed plus periapical radiograms on the dry skull and human subject. The subjects were exposed to intraoral X-ray machine at 60kVp and 70 kVp with exposure time varying between 0.01 and 0.50 second. To determine which interpolation method would provide the better image, seven functions were compared; (1) nearest neighbor (2) linear (3) non-linear (4) facet model (5) cubic convolution (6) cubic spline (7) gray segment expansion. And resampled images were compared in terms of SNR(Signal to Noise Ratio) and MTF(Modulation Transfer Function) coefficient value. The obtained results were as follows ; 1. The highest SNR value(75.96dB) was obtained with cubic convolution method and the lowest SNR value(72.44dB) was obtained with facet model method among seven interpolation methods. 2. There were significant differences of SNR values among CDR, Digora and film scan(P<0.05). 3. There were significant differences of SNR values between 60kVp and 70kVp in seven interpolation methods. There were significant differences of SNR values between facet model method and those of the other methods at 60kVp(P<0.05), but there were not significant differences of SNR values among seven interpolation methods at 70kVp(P>0.05). 4. There were significant differences of MTF coefficient values between linear interpolation method and the other six interpolation methods (P< 0.05). 5. The speed of computation time was the fastest with nearest -neighbor method and the slowest with non-linear method. 6. The better image was obtained with cubic convolution, cubic spline and gray segment method in ROC analysis. 7. The better sharpness of edge was obtained with gray segment expansion method among seven interpolation methods.

• 스마트미디어저널
• /
• 제9권4호
• /
• pp.17-25
• /
• 2020

In the image object classification problem, low-resolution images may have a negative impact on the classification result, especially when the classification method, such as a convolutional neural network (CNN) model, is trained on a high-resolution (HR) image dataset. In this paper, we analyze the behavior of applying a classical super-resolution (SR) method such as bicubic interpolation, and a deep CNN model such as SRCNN to enhance low-resolution (LR) weeds images used for classification. Using an HR dataset, we first train a CNN model for weeds image classification with a default input size of 128 × 128. Then, given an LR weeds image, we rescale to default input size by applying the bicubic interpolation or the SRCNN model. We analyze these two approaches on the Chonnam National University (CNU) weeds dataset and find that SRCNN is suitable for the image size is smaller than 80 × 80, while bicubic interpolation is convenient for a larger image.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.299-302
• /
• 1999

Generation of a Digital Elevation Model (DEM) in remote sensing is an important application. The process of DEM generation often requires interpolation. This paper is aimed to introduce a class of interpolation algorithms using spectral information, which is widely used in geophysical applications, and to examine the applicability of the method to DEM interpolation. The interpolation process can be explained in two steps. The first step is for finding spectral information from the known data and the second step is finding missing data so as to follow the spectral trend found in the previous step. The interpolation algorithm has been tested for a real DEM data and problems in the DEM interpolation are discussed.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.297-300
• /
• 2008

High-resolution mesoscale meteorological modeling requires more accurate and higher resolution digital elevation model (DEM) data. Shuttle Radar Topographic Mission (SRTM) has created 90 m DEM for entire globe and that is freely available for meteorological modeling and environmental applications. In this research, the effects of the topographic interpolation methods on high-resolution wind field simulation in the coastal regions were quantitatively analyzed using Weather Research and Forecasting (WRF) model with SRTM data. Sensitivity experiments with three different interpolation schemes (four-point bilinear, sixteen-point overlapping parabolic and nearest neighbor interpolation methods) were preformed using SRTM. In WRF modeling with sixteen-point overlapping parabolic interpolation, the coastal line and some small islands show more clearly than other cases. The maximum height of inland is around 140 meters higher, while the minimum of sea height is about 80 meter lower. As it concerns the results of each scheme it seems that the sixteen-point overlapping parabolic scheme indicates the well agreement with observed surface wind data. Consequently, topographic changes due to interpolation methods can lead to the significant influence on mesoscale wind field simulation of WRF modeling.

• 지질공학
• /
• 제33권3호
• /
• pp.439-459
• /
• 2023

Numerical analysis has been adopted in nearly all modern scientific and engineering fields due to the rapid and ongoing evolution of computational technology, with the number of grid or mesh points in a given data field also increasing. Some values must be extracted from large data fields to evaluate and supplement numerical analysis results and observational data, thereby highlighting the need for a fast and effective interpolation approach. The quadrilateral irregular network (QIN) proposed in this study is a fast and reliable interpolation method that is capable of sufficiently satisfying these demands. A comparative sensitivity analysis is first performed using known test functions to assess the accuracy and computational requirements of QIN relative to conventional interpolation methods. These same interpolation methods are then employed to produce simple numerical model results for a real-world comparison. Unlike conventional interpolation methods, QIN can obtain reliable results with a guaranteed degree of accuracy since there is no need to determine the optimal parameter values. Furthermore, QIN is a computationally efficient method compared with conventional interpolation methods that require the entire data space to be evaluated during interpolation, even if only a subset of the data space requires interpolation.