• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2015-2021
• /
• 2017

Recently, a lot of attention is fallen to IoT(Internet of Things) for hyper-connected society and the number of unlicensed wireless device has been increasing. Thus, this paper analyzed the impact of unlicensed wireless device on the basis of 802.11ah on licensed LTE user equipment in 900 MHz frequency band for efficient frequency use. As the interference analysis method, Minimum Coupling Loss (MCL) method and Monte Carlo (MC) method were used. In case of one interferer, minimum separation distance between interferer and victim was calculated as about 22 m through the MCL method under the assumption of the worst case. The maximum number of interferer to meet the interference probability of 5% below within a cell radius of the victim was computed as about 3000 by using MC method based on statistical technique. The analysis method and results in this paper are expected to be used for the coexistence between unlicensed wireless device and licensed wireless device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.201-210
• /
• 2002

A number or MPLS ATM switching system have been proposed to increase the access speed or current routers, but they cannot satisfy the Internet users who use diverse applications. So they are required to support the so-called differential service, which discriminates service behaviors according to the service class. In this paper, to support this differential service we suggest an LSP control method, which uses the extended LDP message and establishes several different LSPs for each FEC according to the service class. Also, we propose an marking algorithm using the cell loss priority field or ATM cells in order to process the differential service according to application categories. In addition, we present a forwarding procedure based on the LSP control method and the marking algorithm. A forwarding model applied this forwarding procedure can be easily implemented with a minimum modification of existing MPLS ATM switching systems. Therefore, we can save cost and time needed to implement the proposed model. Finally, we estimate the performance behaviors of the proposed application-based forwarding model by the AweSim simulation package.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.3
• /
• pp.303-308
• /
• 2016

Recently, as the rapid development of network technology and the increase of services required high bandwidth such as multimedia service, the network traffic dramatically increases. This massive increase of network traffic causes some problems such as the degradation of QoS and the lack of network resources and, to solve these problems, various research to guarantee QoS have been performing. Currently, The most representative method to guarantee the QoS is the DiffServ(: Differentiated Service). The DiffServ defines the AF(: Assured Forwarding) PHB(: Per Hop Behavior) and statistically ensures the throughput over the certain level of data rate. However, the TCP congestion control method that make up the majority of the Internet traffic is not fundamentally suitable to the DiffServ that guarantees the throughput without managing the individual flow. Therefore, in this paper, we present this mismatch through the simulation as an example and propose the solution by controlling the TCP of the terminal in the network. The proposed scheme utilizes the information of the reception window size included in the ACK frame and does not require any modification of the TCP algorithms currently in use.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.327-336
• /
• 2004

There is a need for content providers and operators to control the usage of downloaded digital contents. Digital Rights Management(DRM) is the means to control the usage of the digital contents once it has been downloaded. Therefore, appropriate security mechanism is required. The mobile DRM system Is same as the general DRM system. We use encryption technology to package digital contents. In case of Mobile DRM system, secure distribution and secure keeping of packaging encryption key is important. In this paper, we design and implement DRM system on the Mobile Environments following on OMA(Open Mobile Alliance) DRM Model. We considered being a secure DRM system to contain appropriate security solution.

• Journal of KIISE:Information Networking
• /
• v.32 no.6
• /
• pp.723-731
• /
• 2005

Wide spread deployment of infrastructure WLANs has made Wi Fi an integral part of today's Internet access technology. Despite its crucial role in affecting end to end performance, past research has focused on MAC protocol enhancement, analysis and simulation based performance evaluation without sufficient consideration for modeling inaccuracies stemming from inter layer dependencies, including physical layer diversity, that significantly impact performance. We take a fresh look at IEEE 802.11 WLANs, and using experiment, simulation, and analysis demonstrate its surprisingly agile performance traits. Contention based MAC throughput degrades gracefully under congested conditions, enabled by physical layer channel diversity that reduces the effective level of MAC contention. In contrast, fairness and jitter significantly degrade at a critical offered load. This duality obviates the need for link layer flow control for throughput improvement but necessitates traffic control for fairness and QoS. We use experimentation and simulation in a complementary fashion, pointing out performance characteristics where they agree and differ.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.221-230
• /
• 2008

We Studied current Flight Information System everyone employing, and this paper designed a next generation Ubiquitous Flight Information System. Studied a Ubiquitous Flight Information System regarding AVOD, game TV, cellular phone, cabin Internet use for a customer, and airline and control of Air Traffic Service, Air Traffic Control, in seat reservation, transportation, ticketing and luggage back-tracking and airplanes in earthly service. We Designed for a Next Generation Ubiquitous Flight Information System and for necessary for network security, system security of information security system, and derived from comparative analysis of improvement point and difference to existing Ubiquitous Flight Information System and Next Generation Ubiquitous Flight Information as was based on result of research. Present vision to aerial the result of research world of this paper related industry, and ensure safety and communication efficiency and a customer and flight satisfaction, efficiency, and will reclaim the new horizon to the Flight Information Industry.

• Journal of Communications and Networks
• /
• v.13 no.5
• /
• pp.518-524
• /
• 2011

A high assurance IP encryption (HAIPE) compliant protocol accelerator is proposed for military networks consisting of red (or classified) networks and black (or unclassified) networks. The boundary between red and black sides is assumed to be protected via a HAIPE device. However, the IP layer encryption introduces challenges for bandwidth on demand satellite communication. The problems experienced by transmission control protocol (TCP) over satellites are well understood: While standard modems (on the black side) employ TCP performance enhancing proxy (PEP) which has been shown to work well, the HAIPE encryption of TCP headers renders the onboard modem's PEP ineffective. This is attributed to the fact that under the bandwidth-on-demand environment, PEP must use traditional TCP mechanisms such as slow start to probe for the available bandwidth of the link (which eliminates the usefulness of the PEP). Most implementations recommend disabling the PEP when a HAIPE device is used. In this paper, we propose a novel solution, namely broadband HAIPE-embeddable satellite communications terminal (BHeST), which utilizes dynamic network performance enhancement algorithms for high latency bandwidth-on-demand satellite links protected by HAIPE. By moving the PEP into the red network and exploiting the explicit congestion notification bypass mechanism allowed by the latest HAIPE standard, we have been able to regain PEP's desired network enhancement that was lost due to HAIPE encryption (even though the idea of deploying PEP at the modem side is not new). Our BHeST solution employs direct video broadcast-return channel service (DVB-RCS), an open standard as a means of providing bandwidth-on-demand satellite links. Another issue we address is the estimation of current satellite bandwidth allocated to a remote terminal which is not available in DVBRCS. Simulation results show that the improvement of our solution over FIX PEP is significant and could reach up to 100%. The improvement over the original TCP is even more (up to 500% for certain configurations).

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.55-64
• /
• 2002

A number of MPLS ATM systems have been proposed to increase the access speed of current rooters, which only support the beat-effort service. However, the MPLS ATM systems have to support the so-called differential service, which discriminates the applications according to the servile clads because they do not be satisfied the Internet users who use diverse applications. In this paper, to support this differential service a detailed forwarding procedure based on a LSP control method and an application-based marking algorithm is suggested. The LSP control method establishes several different LSPs for each FEC according to the service class and the application-based marking algorithm chooses a proper differential service depending on the application category. Also, a design scheme of forwarding engine, which can be easily implemented with a minimum modification of existing MPLS ATM systems is proposed. And, the best simulation result of high priority application category is gained when the proposed forwarding algorithm is compared with existing algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.63-67
• /
• 2009

In RFID system, Tag's Identification data is processed in host computer by application program. Example of application program is parking administration program, library state program etc.. Tag's ID that is recognized in reader is inputted to the Host computer. Application program of computer searches data in DB of computer such as Tag ID. After finding the same ID, host computer send to control command to driver H/W in accordance with application purpose. But, It need to confirm in long distance whether achievement process is acted normally. There will be the 2 methods, when we monitors the process in long distance. One is wired monitoring system, another is wireless monitoring system. Among wire method, internet communication network is useful. RFID system manufacture first in this treatise. RFID system Embody using EM4095 chip that is doing 125KHz by carrier wave. Tag's characteristic ID is sent in remote place through module that use W3100A chip. This system Manufacture, and data send-receive confirmed using simple application program. Reception confirm by result, and pictures show by whole system and each part. And a control program explained of each part.

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.45-51
• /
• 2019

The use of the Internet of things plays a major role in the Fourth Industrial Revolution, and a series of tasks of accumulating, converging, analyzing and reusing various data and services becomes very important. Because the pace and scope if the paradigm shift in Fourth Industrial Revolution is so rapid and unpredictable, the development and utilization of a system to fulfill this role for IOT are urgently required. In this paper, we introduce the Web-based IOT management system, which connects the IOT with OKMindmap, which is a domestic open source software and service, and the Node-RED service. This system combines the advantages of OKMindmap with the advantages of Node-RED, which is capable of visual component based programming, so that it can easily and flexibly connect the IOT based on Web browsers, and various data and services can be integrated and linked. We developed a camera module, a temperature and humidity sensor module, and the motor control module in Raspberry PI basically, and tested the operation successfully. We plan to extend the IOT component gradually by using Arduino and System On Chip.