• 수산해양기술연구
• /
• 제54권3호
• /
• pp.239-245
• /
• 2018

International Maritime Organization (IMO) has established standards for ship manoeuvrability and applied these standards for vessels over 100 meters in length that built since 2004 (IMO, resolution MSC.137[76]). These standards are no exception to fishing vessels. In this study we carried out a manoeuvring simulation of the new model ship (Stern trawler) of fisheries training ship of Pukyong National University based on Kijima's empirical formula. The formula takes into account of the effect of stern shape or does not take into account of the effect of stern shape. Also we checked whether the simulation results of turning motion of model ship meet IMO manoeuvrability criteria and then compared trajectories between the simulation results of model ship and the results of real sea trial test of the existing ship. In conclusion, Kijima's empirical formulas can estimate the manoeuvrability of fishing vessels at design stage approximately, it needs more parameters of fishing vessel own in case of expressing the manoeuvrability of fishing vessel accurately.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.483-486
• /
• 2006

The study describes the monitoring of the Bay of Bengal as a ballast water exchangeable sea using MODIS/Aqua-derived diffuse attenuation coefficient (K(490)) synchronized with in situ ballast water sampling and analysis along the LNG carrier's route between Japan and Qatar from 2002 to 2005. Based on the relationship between K(490) and corresponding in situ plankton cell densities, the Bay of Bengal is recognized as a ballast water exchangeable sea to meet the regulation of ballast water performance standard of International Maritime Organization (IMO). Furthermore the Bay of Bengal with more than 200m depth and more than 200 nautical mile distance from shore is extracted based on the regulation of ballast water exchange area of IMO. However, an anomalously high K(490) area is found off the coast of Sri Lanka during the northeast monsoon in 2005, which corresponds higher cell densities than the criterion set by the regulation of IMO. The phenomenon of high cell density in the Bay of Bengal seems to be related with the phytoplankton bloom during the northeast monsoon. Seasonal and annual variability of phytoplankton bloom will be investigated to establish an early routing system for avoiding the high cell density area in advance.

• 디지털콘텐츠학회 논문지
• /
• 제12권3호
• /
• pp.391-396
• /
• 2011

최근 5년간, 해양 분야에서는 IT의 접목을 통한 안전운항이 큰 이슈가 되어왔다. 국제해사기구 NAV 위원회에서 정의하는 e-Navigation 전략이 수립되면, 기존 선내 다양한 정보는 필요와 목적에 따라 통합되어 사용되며, 그에 따른, 사용성 평가에 대한 논의가 시작되고 있다. 선박 정보 모니터링은 통합된 디스플레이를 사용하게 되며, 이를 위해서는, 표준에서 요구하는 사용성을 고려해야 한다. 이를 위하여, 본 논문에서는 선박 통합 모니터링을 위한 사용자 인터페이스 설계 가이드라인을 제시한다. 개념 및 요구 사항 분석 그리고 기존 제품의 분석을 바탕으로 선박 통합 모니터링을 위한 사용자 인터페이스 설계의 가이드라인을 제시한다.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.497-506
• /
• 2019

Literature survey was conducted on the 2013 Interim Guidelines for determining the minimum propulsion power to maintain the manoeuvrability of ships in adverse conditions. The International Maritime Organization (IMO) Marine Environment Protection Committee (MEPC) documents related with the Guidelines were reviewed. Compatibility of the present Guidelines can be checked by two different levels: (Level 1) minimum power lines assessment and (Level 2) simplified assessment. The IHS (Information Handling Services) sea-web data on the bulk carriers and the tankers, which were built after 2000, were used to examine the Level 1 assessment. KVLCC2 was used to examine the Level 2 assessment. Regarding the Level 2 assessment, effects of the adverse weather conditions, the added resistance due to waves, the wake fractions and the thrust deduction factors were discussed.

• 대한조선학회논문집
• /
• 제54권2호
• /
• pp.132-142
• /
• 2017

As the International Maritime Organization (IMO) recently introduced the Energy Efficiency Design Index (EEDI) for new ships building and the Energy Efficiency Operational Indicator (EEOI) for ship operation, thus an accurate estimation of added resistance of ships advancing in waves has become necessary. In the present study, OpenFOAM, computational fluid dynamics libraries of which source codes are opened to the public, was used to calculate the added resistance and motions of the KCS. Unstructured grid using a hanging-node and cut-cell method was used to generate dense grid around a wave and KCS. A dynamic deformation mesh method was used to consider the motions of the KCS. Five wavelengths from a short wavelength (${\lambda}/LPP=0.65$) to a long wavelength (${\lambda}/LPP=1.95$) were considered. The added resistance and the heave & pitch motions calculated for various waves were compared with the results of model experiments.

• Corrosion Science and Technology
• /
• 제20권5호
• /
• pp.266-280
• /
• 2021

Since 2020, the International Maritime Organization (IMO) has updated regulations on the sulfur content to be less than 0.5% in exhaust gas emitted from ships. Accordingly, the exhaust gas post-treatment device for ships, which is SOx/NOx reduction technology, was introduced. However, the exhaust gas post-treatment device is suffering corrosion because of the harsh corrosive environment formed by sulfate and chlorine oxide through the desulfurization process. In this investigation, cyclic potentiodynamic polarization (CPDP) experiment for UNS S31603 and UNS N08367 was performed in a green death solution that simulates the environment of a desulfurization device. The corrosion rate of UNS S31603 at the highest temperature was about 3 times higher than that of UNS N83067. Also, electron microscope scan revealed corrosion type UNS N83067 presents intergranular corrosion tendency. On the other hand, UNS S31603 was observed as general corrosion. The α values of UNS N08367 at 30 ℃ and 60 ℃ were higher than those of UNS S31603, thus UNS N08367 is considered to have a higher local damage tendency. Whereas, since the α value of UNS S31603 at 90 ℃ is larger than that of UNS N08367, UNS S31603 is considered to have a higher local damage trend.

• Corrosion Science and Technology
• /
• 제18권3호
• /
• pp.78-85
• /
• 2019

The International Maritime Organization (IMO) will administer a new 0.5% global sulfur cap on fuel content from 1 January 2020, lowering from the present 3.5% limit. Seawater $SO_x$ (sulfur oxide) scrubbing is especially spray scrubbing and a promising alternative to complying with the IMO regulation. However, the ionization of $SO_2$ (sulfur dioxide) and the $H_2SO_4$ (sulfuric acid) formed from $SO_3$ (sulfur trioxide) is proposed to accelerate corrosion of the internal seawater pipe. Apparently, the corrosion of the scrubber seawater piping system occurs in a severe and frequent manner. Hence, in this study, electrochemical measurement and weight loss of carbon steel (used as seawater pipe in most of the ships) in diluted sulfuric acid solution were investigated to determine corrosion rate, corrosion current density, corrosion potential, electrochemical behavior, and impressed-current density. Accordingly, the corrosion rate of carbon steel sheet in various diluted sulfuric acid solutions was observed to be greater than that in natural seawater, thus suggesting the fundamental data to deal with corrosion problems in scrubber seawater pipe.

• 한국항해항만학회지
• /
• 제43권5호
• /
• pp.296-301
• /
• 2019

The Electronic Chart Display and Information System (ECDIS) is an integral component of ship navigation equipment, that enables mariners to view Electronic Navigational Charts (ENC). Recently, it has become possible to transport freight and energy resources via the Northern Sea Routes (NSR) as global warming has been accelerating. However, ice can impact all types of ships and the potential danger that ice poses is significant. Until now, ice, consistently proven to be one of the most dangerous threats impacting navigation in ice-covered regions, has its detailed standard in the specification of the International Hydrographic Organization (IHO) for ECDIS. The investigations described in this paper were conducted to assess the advantages and problems of the display of ice objects on ECDIS. The experiments were conducted by using the Geographic Information System (GIS) to perform ice objects with their corresponding colors and symbols. Implementation of the standardized appearance of ice objects can enable mariners to access the ice condition of seas in a short time before navigating a safe passage through potentially treacherous waters. However, remain issues that must be overcome for data on ice to be fully compatible with an ECDIS system.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.1-7
• /
• 2021

Restrictions on the emissions of nitrogen oxides, sulfur oxides, carbon dioxide, and particulate matter from marine engines are being tightened. Each of these emissions requires different reduction technologies, which are costly and require many pieces of equipment to meet the requirements. Liquefied natural gas (LNG) fuel has a great advantage in reducing harmful emissions emitted from ships. Therefore, the marine engine application of LNG fuel is significantly increasing in new ship buildings. Accordingly, this study analyzed the internal support structure, insulation type, and fuel supply piping system of a 35 m3 International Maritime Organization C type pressurized storage tank of an LNG-fueled ship. Analysis of the heat transfer characteristics revealed that A304L stainless steel has a lower heat flux than A553 nickel steel, but the effect is not significant. The heat flux of pearlite insulation is much lower than that of vacuum insulation. Moreover, the analysis results of the constraint method of the support ring showed no significant difference. A553 steel containing 9% nickel has a higher strength and lower coefficient of thermal expansion than A304L, making it a suitable material for cryogenic containers.

• Journal of Korea Trade
• /
• 제23권2호
• /
• pp.59-75
• /
• 2019

Purpose - The International Maritime Organization (IMO) has promulgated strict regulations on emissions in the maritime shipping industry. LNG (Liquefied Natural Gas) is, therefore, recognized as the optimal fuel alternative solution. The aim of this study is to select the most suitable location for an LNG bunkering port. This is formulated as a multiple-criteria ranking problem regarding four candidate ports in South Korea: the ports of Busan, Gwangyang, Incheon, and Ulsan. Design/Methodology/approach - An analysis employing the Consistent Fuzzy Preference Relation (CFPR) methodology is carried out, and the multiple-criteria evaluation of various factors influencing the location selection, such as the average loading speed of LNG, the number of total ships, the distance of the bunkering shuttle, and the degree of safety is performed. Then, based on the combination of both the collected real data and experts' preferences, the final ranking of the four ports is formulated. Findings - The port of Busan ranks first, followed by the ports of Gwangyang and Ulsan, with the port of Incheon last on the list. Originality/value - The Korean government could proceed with a clear vision of the candidate ports' ranking in terms of the LNG bunkering terminal selection problem.