• Tuberculosis and Respiratory Diseases
• /
• v.40 no.6
• /
• pp.646-652
• /
• 1993

Background: Lung cancer and chronic obstructive lung disease often coexist in the same person who are elderly and cigarette smoking. There are several reports that the presence of chronic obstructive pulmonary disease constitutes an independent risk factor for the development of lung cancer. Moreover, the association between mucus hypersecrtion and lung cacer has been reported. Method: In 72 cases with primary lung cancer which were confirmed histopathologically at Chonbuk University Hospital from August 1986 to July 1991, We evaluated the relationship between spirometry and lung cancer characteristics. Results: Six cases(8.3%) showed normal lung function, 16(22.2%) cases showed pure restrictive lung disease, 46(63.9%) cases showed moderated obstructive lung disease and 4(5.6%) cases showed severe obstructive lung disease. $FEV_1$(%) was lower in central type than in peripheral type, lower in advanced non-small cell cancer and lower in subjects with phlegm. $FEV_1$/FVC(%) was higher in small cell cancer than in squamous cell cancer and higher in patients without previous pulmonary disease than with previous pulmonary disease. But there was no statistically significant difference in lung function according to histologic types and smoking history. Lung cancers with $FEV_1$/FVC less than 75% consisted of 35 cases of squamous cell cancer, 7 of small cell cancer(14%), 5 of adenocarcinoma(10%), 2 of large-cell carcinoma and 1 of unclassified carcinoma. Squamous cell carcinoma occured more in patients with $FEV_1$/FVC<75% than with $FEV_1$/FVC$\geq$75%(p<0.05). Conclusion: It was suggest that low $FEV_1$/FVC, as reflection of obstructive lung disease, may be at greater risk for squamous cell carcinoma in cigarette smoker.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5D
• /
• pp.445-451
• /
• 2012

Visual changes and speed changes in curved sections of highways are more dangerous than straight sections According to the enquetes conducted by Coalition for Transportation Culture in 1999, about 78% of drivers are dissatisfied with traffic guide and safety signs, with lack of visibility being the largest reason with about 27.9% of respondents indicating it as reason for dissatisfaction. In particular, the lack of visibility during nighttime or bad weather not only threatens driver safety due to poor delivery of information, but also affects the service level of highways. Because of this a new delineation must be installed and managed to enhance driver visibility. In this research, an optimal delineation system to enhance traffic safety is presented. In this research drivers effectively obtained information on highway alignment on the curved sections using a retro-reflection type delineation system and a newly-developed internal lighting delineation system to improve safety on the highways. A statistical comparison was conducted and analysis was done for the delineation systems that enhanced visibility through primary and secondary enquaetes. As a result, inside-lighting delineator will be selected in terms of safety at the curve sections. The inside-lighting delineator was more effective than the retro-reflection delineator on visibility, the necessity of reduction of speed and will reduce the hazard at curve sections. It is anticipated that when a delineation system based on this research is installed, a reduction in the number the number and severity of traffic accidents on curved sections will be reduced. In addition this system will more effectively provide drivers with information about highway alignment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.221-221
• /
• 2013

Vertical LED (VLED) has been recognized as a way to obtain the high-power LED due to their advantages [1]. However, approximately 4% of the light generated from the active region is extracted, if the light extraction from side walls and back side is neglected because of Fresnel reflection (FR) and total internal reflection (TIR) [2,3]. In this study, the optical simulation of the VLED with the various microstructures was performed. Among them, the microlens having the diameter of 3 ${\mu}m$ and the height of 1.5 ${\mu}m$ shown the best result was chosen, and then, optimized microlens was formed on a GaN template using conventional semiconductor process. Various microstructures were proposed to improve the light extraction efficiency (LEE) of the VLED for the simulation. The LEE was simulated using LightTools based on a Monte Carlo ray tracing. The microstructures with hemisphere, cone, truncated and cylinder pattern having diameter of 3 ${\mu}m$ were employed on the top layer of the VLED respectively. The improvement of the LEE by using the microstructure is 87% for the hemisphere, 77% for the cone, 53% for the truncated, 21% for the cylinder, compared with the LEE of the flat surface at the reflectance of 85%. The LEE was increased by 88% at the height of 1.5 ${\mu}m$, compared with the LEE of the flat surface. We found that the microlens on the top layer is the most suitable for increasing the LEE. In order to apply the proposed microlens on n-GaN surface, we fabricated microlens on a GaN template. A photoresist array having hexagonal-closed packed microlens was fabricated on the GaN template. Then, optimization of etching the GaN template was performed using a dry etching process with ICP-RIE. The dry etching carried out using a gas mixture of Cl2 and Ar, each having a flow rate of 16 sccm and 10 sccm, respectively with RF power of 50 W, ICP power of 900 W and chamber pressure of 2 mTorr was the optimum etching condition as shown in Fig. 2(a).

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.2
• /
• pp.101-110
• /
• 2019

Filmic spaces are not only a core expressive factors that can embody both internal and external meanings of films, but also play an important role for initiating dramatic context in terms of narratives. They establish visible environment in which provocative incidents occur and characters' behaviors are induced, include characters' psychology or emotional meanings of narratives and provoke tensions through symbolic meanings and the implicit function of surface background. This paper, therefore, analyzes the film, , by focusing on the dramatic function of narrative space. This film provides insights and thoughts through deep philosophical reflection, by escaping from the convention of such a genre, through deep philosophical reflection, by escaping from the convention of such a genre, though it belongs seemingly to the crime thriller genre using Mexico's drug cartel as it main material. In the film, narrative spaces are responsible for emotions invoking dramatic tensions beyond provocative incidents and the elaborately planned and controlled mise-en-scene absorbed audiences' attention by organizing ultimate suspense. In conclusion, flow and dramatic lingering imagery of this film might be achieved by power of scenes rather than plot factors. This study thus explained the correlation between narrative spaces and dramatic immersion, by analyzing spaces appearing in and visualized construction. It is hoped that this will further extends the pattern of researches on dramatic immersion, which have been primarily focused on plots and characters.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.169-177
• /
• 2008

The thermal and optical properties of cellulose tri(cholesteryloxy) carbonate(CCE0) and cellulose tri(cholesteryloxycarbonyl)alkanoates (CCEn, n=$2{\sim}8$, 10, the number of methylene units in the spacer) were investigated. CCE0 formed an enantiotropic cholesteric phase, whereas all the CCEn exhibited monotropic cholesteric phases. CCEn with n=$3{\sim}8$ formed cholesteric phases with left-handed helical structures whose optical pitches (${\lambda}_m's$) decrease with increasing temperature. On the other hand, CCE0 and CCEn with n=2 or 10 did not display reflection colors over the full cholesteric range, suggesting that the helical twisting power of the cholesteryl group highly depends on the length of the spacer connecting the cholesteryl group to the main chain. The thermal stability and degree of order in the mesophase and the temperature dependence of the ${\lambda}_m$ observed for CCEn highly depended on n. The results were discussed in terms of the differences in the internal plasticization, the arrangement of the side groups, and the conformation of the molecules.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.421.2-421.2
• /
• 2016

고효율 태양전지에서 후면 반사 방지막은 장파장대(900nm~1200nm) 빛의 내부 반사를 증가시켜 광흡수도를 개선한다. 태양전지 후면에 박형 절연층 구조를 구성함으로써 특정 파장에서 높은 반사도를 얻을 수 있는 Bragg mirror 구조를 이론적으로 계산할 수 있다. Bragg mirror 구조를 이용하여 태양전지의 후면 반사층(Rear reflector layer)을 형성함으로써 태양전지 내부의 광흡수도를 개선할 수 있다. 후면 반사 방지막(Rear anti-reflection coating)으로 사용되는 Al2O3와 SiOxNy 또는 이러한 두 가지 물질의 겹층 구조를 구성하여 장파장대 빛의 반사도 차이에 의한 광흡수도 개선 정도를 광학 시뮬레이션을 통해 계산하였다. 광학 시뮬레이션은 TCAD를 이용하였으며 두 가지 겹층 구조에서 각 반사 방지막의 두께에 따른 단락 전류(Jsc)의 개선 정도, 후면 반사층 두께의 최적화 조건을 계산하였다. 후면 반사방지막을 제외한 기본적인 태양전지 구조는 n-type PERC 구조를 사용하였으며, 후면 반사방지막만의 광학적 특성을 살펴보기 위해 전극은 광학적으로 투명하다고 가정하였다. 반사방지막 두께의 범위는 Al2O3(5-30nm), SiNx(150-300nm), SiOxNy(150-300nm)에서 수행하였으며, 각각 1nm, 2nm 간격으로 진행하였다. Al2O3/SiOxNy 구조에서는 단락 전류가 32.45-32.87mA/cm2 값을 가진다. Al2O3/SiNx 구조에서는 단락 전류가 32.59-32.87mA/cm2 값을 가진다. 결론적으로, 후면 반사방지막의 겹층 구조를 통해 광흡수도를 증가 시킬 수 있으며, TCAD 시뮬레이션을 통하여 입사되는 태양광 스펙트럼에 최적화된 구조를 설계할 수 있다.

• Journal of Korean Medical classics
• /
• v.29 no.4
• /
• pp.17-36
• /
• 2016

Objectives : This paper seeks to study the provenances of 10 Symptoms of Para-cold damage from Yixuerumen, and discovers the rationality and originality of para-cold damages recognized by Li Chan. Methods : The paper looks through the books referenced by Yixuerumen to investigate the source text for Yixuerumen's Para-cold Damage chapter, and the contents of the referenced books will be compared to that of Yixuerumen. Results : The sources of the 10 symptoms of para-cold damage from Yixuerumen Chapter of Cold Damage can be traced to Leizhenghuorenshu (expectoration, indigestion, rising temperature due to lack of energy, and beriberi), Wang Zhen's Shanghanzhengzhimingtiao Xinzengxuleishanghansizheng(the infection in a boil, blood sattis, caused overexertion, and pox), and Liu Chun's Yujiweiyi's chapter on Common Cold. Here, Li Chan made his own addition of internal damage and damage of overworking. Li Chan seems to have considered para-cold damage not as a type of cold damage but as a "concept relative to the broader range of cold damage." In reflection of this understanding, Li Chan limited the number of categories to ten in accordance with the developmental trace leading from Leizhenghuorenshu to Shanghanzhengzhimingtiao. When we understand para-cold damage as a "concept relative to the narrower range of cold damage," it could be used as a mean as for "Wenbin diagnosis," but Yixuerumen's para-cold damage is only utilized for the "diagnosis of a broader concept of cold damage." Conclusions : Li Chan deserves credits for his academic rationality and originality displayed by the method he used to form para-cold damages where he used real cold damage and para-cold damage as principles, by the division of para-cold damage symptoms into ten provenances, by the creation of the concept of para-cold damage, and by his broad collection of prescription and treatment corresponding to each type.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.96-104
• /
• 2008

In this study, the observation of test pieces with an optical microscope was carried out after fabricating 4 groups of standard lacquer, in order to inquire into the ancient lacquering techniques. Group I had transparent reddish brown color, and the part of layer was indefinite, and the layer polished was easily distinguished. Group II had mostly transparent yellowish brown color, and it was possibility distinguished the layers when they were varnished with mixed lacquer after prime coating, and when they were varnished with lacquer as the prime coating. Group III set up membrane in the hardening process of the lacquer, and the lacquer and the unsaturated fatty acid of internal part was dried, so the top layer and the lacquer layer were separated and observed. Group IV: When the lacquer coat film of Group IV test pieces were observed in polarized light, the ferrous components were seen as the black and red color were mixed, and the silica crystals of silty soil were distinguished by reflection of lights. And the colors were distinguished as the lacquer layer of ruddle had red color, and the mixed lacquer of reddish lacquer and ruddle had the deep red color at the top and the bottom, but the middle part had the bright red color.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.5
• /
• pp.307-311
• /
• 2014

Because of a waveguiding effect and total internal reflection caused by a difference in refractive indices, only 20% of generated light is emitted to the air and the rest is trapped or absorbed in the device. An improvement of outcoupled efficiency of organic light-emitting diodes was studied using a microlens array. Mold of microlens array was fabricated by using photo-lithography with the AZ9260 photoresist, and the microlens array was formed onto the glass substrate using the UV curing agent named ZPU13-440. Device structure consists of microlens/glass/ITO/TPD/$Alq_3$/LiF/Al. It was found that there is an improvement of external quantum efficiency by about 20% at the same current density for the device with the microlens array compared to that of the reference one. Simulated outcoupled efficiency shows the improvement by about 20% for the device with the microlens array compared to that of the reference one. These results are consistent with the experimental ones.

• Archives of design research
• /
• v.16 no.2
• /
• pp.189-196
• /
• 2003

The purpose of this study is to examine and understand decoding process of the Advertising - text to users a various aspects of semiotic approaches. Further more, through this study, show the sign- structures of the ad-text. For this purpose this study has chosen about the AD of publication of constant period that explore the variable characteristics, access the audience's meaning - structures. Through this analysis , grasp the point of internal and external linked structures. The results of this study can be summarized as follows; ㆍ The AD were applied using the transformational signifier of sign-system rather than the reflection of life's quality and products itself. Moreover to show itself meaning, the ad should do selection of transformation of thought than information-oriented. ㆍ The AD-text can be produced its productive efforts as well as decoding process of audience through various linked channel. Association, structured linking, audience's decoding, thematic structures are very important points in order to read the AD.