• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.1-28
• /
• 2015

In this paper, the dynamic response of functionally gradient steel (FGS) composite cylindrical panels in steady-state thermal environments subjected to impulsive loads is investigated for the first time. FGSs composed of graded ferritic and austenitic regions together with bainite and martensite intermediate layers are analyzed. Thermo-mechanical material properties of FGS composites are predicted according to the microhardness profile of FGS composites and approximated with appropriate functions. Based on the three-dimensional theory of thermo-elasticity, the governing equations of motionare derived in spatial and time domains. These equations are solved using the hybrid Fourier series expansion-Galerkin finite element method-Newmark approach for simply supported boundary conditions. The present solution is then applied to the thermo-elastic dynamic analysis of cylindrical panels with three different arrangements of material compositions of FGSs including ${\alpha}{\beta}{\gamma}M{\gamma}$, ${\alpha}{\beta}{\gamma}{\beta}{\alpha}$ and ${\gamma}{\beta}{\alpha}{\beta}{\gamma}$ composites. Benchmark results on the displacement and stress time-histories of FGS cylindrical panels in thermal environments under various pulse loads are presented and discussed in detail. Due to the absence of similar results in the specialized literature, this paper is likely to fill a gap in the state of the art of this problem, and provide pertinent results that are instrumental in the design of FGS structures under time-dependent mechanical loadings.

• 한국지리정보학회지
• /
• 제2권2호
• /
• pp.1-8
• /
• 1999

세선화 결과에서 원래 선의 굵기 정보는 도면 자동 벡터화 시스템을 구현하는데 유용하게 사용될 수 있다. 본 연구는 세선화 결과에서 원래 선의 굵기 정보를 표현할 수 있는 세선화의 전처리 기법을 제안하였다. 제안된 기법에서는 입력 도면에서 선을 구성하는 각 화소들에 대해서 그것이 주변화소들로부터 둘러싸인 정도를 나타내는 깊이를 계산하고, 세선화 결과에서 골격선의 깊이 정보를 보고 원래 선의 굵기를 알 수 있게 하였다. 제안된 기법을 구현하여 등고선에 대해 실험한 결과, 골격선의 깊이 정보로부터 그 선이 주곡선인지 계곡선인지 쉽게 구별할 수 있었다.

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.102-112
• /
• 2013

A very high-temperature gas reactor (VHTR) is one of the next generation nuclear reactors owing to its safety, high energy efficiency, and proliferation-resistance. Heat is transferred from the primary helium loop to the secondary helium loop through an intermediate heat exchanger (IHX). Under VHTR environment Alloy 617 is being considered a candidate Ni-based superalloy for the IHX of a VHTR, owing to its good creep resistance, phase stability and corrosion resistance at high temperature. In this study, high-temperature corrosion tests were carried out at 850 - $950^{\circ}C$ in air and impure helium environments. Alloy 617 specimens showed a parabolic oxidation behavior for all temperatures and environments. The activation energy for oxidation was 154 kJ/mol in helium environment, and 261 kJ/mol in an air environment. The scanning electron microscope (SEM) and energy-dispersive x-ray spectroscopy (EDS) results revealed that there were a Cr-rich surface oxide layer, Al-rich internal oxides and depletion of grain boundary carbide after corrosion test. The thickness and depths of degraded layers also showed a parabolic relationship with the time. A corrosion rate of $950^{\circ}C$ in impure helium was higher than that in an air environment, caused by difference in the outer oxide morphology.

• Computers and Concrete
• /
• 제15권6호
• /
• pp.951-972
• /
• 2015

The focus of the present study is to investigate both local and global behaviour of a precast concrete sandwich panel. The selected prototype consists of two reinforced concrete layers coupled by a system of cold-drawn steel profiles and one intermediate layer of insulating material. High-definition nonlinear finite element (FE) models, based on 3D brick and 2D interface elements, are used to assess the capacity of this technology under shear, tension and compression. Geometrical nonlinearities are accounted via large displacement-large strain formulation, whilst material nonlinearities are included, in the series of simulations, by means of Von Mises yielding criterion for steel elements and a classical total strain crack model for concrete; a bond-slip constitutive law is additionally adopted to reproduce steel profile-concrete layer interaction. First, constitutive models are calibrated on the basis of preliminary pull and pull-out tests for steel and concrete, respectively. Geometrically and materially nonlinear FE simulations are performed, in compliance with experimental tests, to validate the proposed modeling approach and characterize shear, compressive and tensile response of this system, in terms of global capacity curves and local stress/strain distributions. Based on these experimental and numerical data, the structural performance is then quantified under various loading conditions, aimed to reproduce the behaviour of this solution during production, transport, construction and service conditions.

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.453-469
• /
• 2011

A one-story, wooden-frame, intermediate-bay model with Dou-Gon designed according to the Building Standards of the Song Dynasty (A.D.960-1279), was tested on a unidirectional shaking table. The main objectives of this experimental study were to investigate the seismic performance of Chinese historic wooden structure under various base input intensities. El Centro wave (N-S), Taft wave and Lanzhou wave were selected as input excitations. 27 seismic geophones were instrumented to measure the real-time displacement, velocity and acceleration respectively. Dynamic characteristics, failure mode and hysteretic energy dissipation performance of the model are analyzed. Test results indicate that the nature period and damping ratio of the model increase with the increasing magnitude of earthquake excitation. The nature period of the model is within 0.5~0.6 s, the damping ratio is 3~4%. The maximum acceleration dynamic magnification factor is less than 1 and decreases as the input seismic power increases. The frictional slippage of Dou-Gon layers (corbel brackets) between beams and plates dissipates a certain amount of seismic energy, and so does the slippage between posts and plinths. The mortise-tenon joint of the timber frame dissipates most of the seismic energy. Therefore, it plays a significant part in shock absorption and isolation.

• Ocean and Polar Research
• /
• 제26권1호
• /
• pp.65-75
• /
• 2004

In order to understand the water masses and their distribution in the eastern Yellow Sea from winter to spring, a cluster analysis was applied to the temperature and salinity data of Korea Oceanographic Data Center from 1970 to 1990. From December to April, Yellow Sea Cold Water (YSCW) dominates the eastern Yellow Sea, whereas Eastern Yellow Sea Mixed Water (MW) and Yellow Sea Warm Water (YSWW) are found in the southern part of the eastern Yellow Sea. MW appears at the frontal region around $34^{\circ}N$ between YSCW in the north and YSWW in the south. On the other hand, Tshushima Warm Water (TWW) is found around Jeju Island and the South Sea of Korea. These water masses are relatively well-mixed throughout the water column due to the winter monsoon. However, the water column begins to be stratified in spring due to increased solar heating, the diminishing winds and fresh water discharge, and the water masses in June may be separated into surface, intermediate and bottom layers of the water column. YSWW advances northwestward from December to February and retreats southeastward from February to April. This suggests a periodic movement of water masses in the southern part of the eastern Yellow Sea from winter to spring. YSWW may continue to move eastward with the prevailing eastward current to the South Sea from April to June. Also, the front relaxes in June, but the mixed water advances to the north, increasing salinity. The salinity is also higher in the nearshore region than offshore. This indicates an influx of oceanic water to the north in the nearshore region of the eastern Yellow Sea in spring in the form of mixed water.

• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.299-309
• /
• 2004

Conductivity-temperature-depth (CTD) data obtained along a meridional section in the eastern tropical Pacific in July 2003 have been analyzed to identify various water masses, and to examine the hydrographic structure and zonal geostrophic currents in the upper 1000 m. Water mass analysis shows the existence of subtropical and intermediate waters, characterized by layers of subsurface salinity maximum and minimum, originating from both hemispheres of the Pacific. Vertical section of temperature in the upper 200 m shows the typical trough-ridge structure associated with the zonal current system for most of the tropical Pacific. Water with the lowest salinity of less than 33.6 was found in the upper 30 m between $8.5^{\circ}N$ and $10.5^{\circ}N$ in a boundary zone between the North Equatorial Current and North Equatorial Countercurrent. Temporal changes in water properties observed at $10.5^{\circ}N$ over a period of 9 days suggest both the local rainfall and horizontal advection is responsible for the presence of the low-salinity water. Development of a barrier layer was also observed at $10.5^{\circ}N$. In the North Equatorial Current region a local upwelling was observed at $15^{\circ}N$, which brings high salinity and cooler subtropical water to the sea surface. A band of countercurrent occurs in the upwelling region between $13^{\circ}N$ and $15^{\circ}N$.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.590-597
• /
• 2010

HTGR using a TRISO coated particles as nuclear raw fuel material can be used to produce clean hydrogen gas and process heat for a next-generation energy source. For these purposes, a TRISO coated particle was prepared with 3 pyro-carbon (buffer, IPyC, and OPyC) layers and 1 silicone carbide (SiC) layer using a CVD technique on a spherical $UO_2$ kernel surface as a fissile material. In this study, a spherical $UO_2$ particle was prepared using a modified sol-gel method with a vibrating nozzle system, and TRISO coating fabrication was carried out using a fluidized bed reactor with coating gases, such as acetylene, propylene, and methyltrichlorosilane (MTS). As the results of this study, a spherical $UO_2$ kernel with a sphericity of 1+0.06 was obtained, and the main process parameters in the $UO_2$ kernel preparation were the well-formed nature of the spherical ADU liquid droplets and the suitable temperature control in the thermal treatment of intermediate compounds in the ADU, $UO_3$, and $UO_2$ conversions. Also, the important parameters for the TRISO coating procedure were the coating temperature and feed rate of the feeding gas in the PyC layer coating, the coating temperature, and the volume fraction of the reactant and inert gases in the SiC deposition.

• Parasites, Hosts and Diseases
• /
• 제52권4호
• /
• pp.413-418
• /
• 2014

Hydatid cyst caused by Echinococcus granulosus is one of the most important parasitic diseases around the world and many countries in Asia, including Iran, are involved with this infection. This disease can cause high mortality in humans as well as economic losses in livestock. To date, several molecular methods have been used to determine the genetic diversity of E. granulosus. So far, identification of E. granulosus using real-time PCR fluorescence-based quantitative assays has not been studied worldwide, also in Iran. Therefore, the aim of this study was to investigate the genetic diversity of E. granulosus from center of Iran using real-time PCR method. A total of 71 hydatid cysts were collected from infected sheep, goat, and cattle slaughtered in Isfahan, Iran during 2013. DNA was extracted from protoscolices and/or germinal layers from each individual cyst and used as template to amplify the mitochondrial cytochrome c oxidase subunit 1 gene (cox1) (420 bp). Five cattle isolates out of 71 isolates were sterile and excluded from further investigation. Overall, of 66 isolates, partial sequences of the cox1 gene of E. granulosus indicated the presence of genotypes G1 in 49 isolates (74.2%), G3 in 15 isolates (22.7%), and G6 in 2 isolates (3.0%) in infected intermediate hosts. Sixteen sequences of G1 genotype had microgenetic variants, and they were compared to the original sequence of cox1. However, isolates identified as G3 and G6 genotypes were completely consistent with original sequences. G1 genotype in livestock was the dominant genotype in Isfahan region, Iran.

• 한국해양학회지
• /
• 제13권1호
• /
• pp.1-8
• /
• 1978

지층 속에 남아 있는 퇴적구조는 퇴적환경을 추정하는 중요한 지표가 된다. 암상이나 화석과는 달리 퇴적구조는 퇴적 현장에서 형성되고 외부로부터 전입될 수는 없기 때문이다. 퇴적구조는 기존 암석이나 퇴적층이 잘 노출되어 있는 노두에서는 쉽사리 연구될 수 있으나 지표면하에 존재하는 퇴적층 구조는 직접적인 방법으로서는 시추에 의해서만 연구될 수 있다. 그러나 지하층을 시추하기에는 시간적 경제적으로 많은 부담이 따르기 때문에 개략조사의 단계에서는 바람직하지 못하다. 탄성파 탐사 방법이 발전됨에 따라 비교적 장파장을 사용하여 얕은 지하층을 탐사할 때 대체적인 지층구조를 파악할 수가 있게 되었다. 이는 각 퇴적층이 Acoustic Impedance를 달리하기 때문에 나타나는 결과이다. 분해능이 50cm정도의 탄성파를 이용한 탄성파 탐사에서 얻어진 탄성파 반사 기록은 이 분해능 범위보다 큰 규모의 해저지층구조를 어느 정도 잘 반영해 준다.