• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1477-1486
• /
• 2012

In this paper, we propose Multi-view CGH Making System using method of generation of virtual view-point depth image. We acquire reliable depth image using TOF depth camera. We extract parameters of reference-view cameras. Once the position of camera of virtual view-point is defined, select optimal reference-view cameras considering position of it and distance between it and virtual view-point camera. Setting a reference-view camera whose position is reverse of primary reference-view camera as sub reference-view, we generate depth image of virtual view-point. And we compensate occlusion boundaries of virtual view-point depth image using depth image of sub reference-view. In this step, remaining hole boundaries are compensated with minimum values of neighborhood. And then, we generate final depth image of virtual view-point. Finally, using result of depth image from these steps, we generate CGH. The experimental results show that the proposed algorithm performs much better than conventional algorithms.

• Journal of Fashion Business
• /
• v.19 no.6
• /
• pp.28-41
• /
• 2015

Properties of textile fabrics influence the appearance, aesthetics, and performance of garment. Drape and related properties of fabrics affect profoundly the static and dynamic appearance during wearer's movement. The three dimensional shape of the folded structure often deforms with time or with subtle vibration around the fabric specimen during the drape measurement. Due to the uneven and complex nature of fabrics, the overall shape of the fabric specimen on the drape tester often becomes unstable. There is a need to understand the fundamental mechanisms of how draping may generate pleasing forms. Two drape test methods, conventional Cusick drape test, and in-built drape tester, based on a depth camera, are compared. Fabric specimens including cotton, linen, silk, wool, polyester, and rayon are investigated for the fabric drape and other physical/mechanical parameters. Drape coefficient values of fabric specimens are compared based on the final drape images, together with the intermediate 3D drape images of the specimens during elevation process of the drape tester equipped with a stepper motor system. The correlation coefficient between the data based on the two methods is reasonably high. Another advantage from the depth camera system is that it allows further analysis of three-dimensional information regarding the fabric drape shape, including the shape of nodes or crest and trough.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.639-640
• /
• 2013

In this study, a new method that finds an area where interesting objects are placed to generate DIBR-based intermediate images with higher quality. This method complements the existing object segmentation algorithm called Grabcut by finding the bounding box automatically, whereas the existing algorithm requires a user to select the region specifically. Then, the histogram of the depth map information is then used to separate the background and the frontal objects after applying the GrabCut algorithm. By using the new method, it is found that it produces better result than the existing algorithm. This paper describes the new method and future research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1642-1652
• /
• 2012

Generally, a camera isn't located at the center of display in a tele-presence system and it causes an incorrect eye contact between speakers which reduce the realistic feeling during the conversation. To solve this incorrect eye contact problem, we newly propose an intermediate view reconstruction algorithm using both a color camera and a depth camera and applying for the depth image based rendering (DIBR) algorithm. In the proposed algorithm, an efficient hole filling method using the arithmetic mean value of neighbor pixels and an efficient boundary noise removal method by expanding the edge region of depth image are included. We show that the generated eye-contacted image has good quality through experiments.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.2
• /
• pp.171-183
• /
• 2020

The purpose of this study is to analyze in advance the problems and improvements that may occur during the construction of intermediate slabs and the loading of intermediate slabs through the preliminary structural safety evaluation of intermediate slabs for Test bed structures in deep depth tunnels. The Test bed construction can verify and confirm the results of the design and construction technology development of large depth double deck tunnel through the process, and can also be used as a learning site for engineers and the general public to speed up the time of underground space development. There will be an opportunity to do this. In particular, the design load of middle slab built inside the circular deep-depth double-sided tunnel cross-section varies depending on the construction method and the construction equipment load used. Class 3 truck load of KL-510 assumed to be common load to upper and middle slab during loading and installation is loaded on upper and lower slab with different working position for each load combination Analyzed.

• Journal of Aquaculture
• /
• v.13 no.4
• /
• pp.339-351
• /
• 2000

Optimal environmental conditions, that sustained fastest growth, lowest mortality and abnormality of the scallop Patinopecten yessoensis, were identified from field experiments undertaken at Chumunjin during 1991-1998. Temperature within the water column 10~30 m depth ranged between 5 and 23$^{\circ}C$; high temperature and daily fluctuation resulted in growth retardation and heavy mortality of the scallop. Optimal salinity range was between 31.5 and 34.5%0 and water transparency 6.0 and 18.1 m, which was significantly affected by phytoplankton density. Chlorophyll concentration ranged between 0.04 and 3.51 f.lgfL. Low temperature and high chlorophyll concentration appear to support faster growth of the scallop. Optimal periods of transplantation for intermediate culture were between mid July and early November: cultured under high density during July-August as a first step and under low density during mid September through early November as a second step. Optimal stocking density in square net cage (<35${\times}$35 em) for intermediate culture was 30-40 individuals per cage for main culture using lantern net and 80 -100 individuals of the size of 1.5 ~ 3.0 em shell height per cage for sowing culture. During the intermediate culture, the highest growth was realized, when the cage was held at water depth between 10 and 15 m. Water depth below 25 m, however, was best to avoid mass mortality during the periods of abnormally high water temperature and high variation of water temperature. The daily growth rate during the intermediate culture was between 0.019~0.381 mm; low in January and February but high in March and April. It is suggested that the main culture is commenced before June under low stocking density to avoid the possibility of mass mortality during summer by high water temperature.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.3
• /
• pp.13-23
• /
• 2000

The distributions of dissolved inorganic nutrient contents were investigated along transection line J (30° N) in the eastern East China Sea in December 1993 and August 1994, respectively. The concentrations of nitrate and silicate in the Kuroshio Surface Water (KSW) with high temperature and high salinity were low below 2μM and 5μM, respectively. However, these were increased sharply with depth and ranged from 20 to 40, 45 to 100μM, respectively, in the Kuroshio Intermediate Water (KIW). The relationship between temperature and nutrients suggests that Kuroshio Intermediate Water with rich nutrients were intruded into the bottom water of the outer continental shelf in the East China Sea. The bottom water of the outer continental shelf was made of two end-members mixing; nutrient depleted warm water and nutrient enriched cold water. Based on temperature, salinity and silicate concentration, the nutrients in the bottom water of the outer continental shelf suggusted to be supplied through the vertical mixing of Kuroshio subsurface water in the depth range of 100～400m. Upwelled nutrient rich water appears to be a important source of nutrients for primary production in the continental shelf area of the East China Sea.

• Steel and Composite Structures
• /
• v.42 no.1
• /
• pp.1-22
• /
• 2022

In cold-formed steel (CFS) structures, such as trusses, transmission towers and portal frames, the use of back-to-back built-up CFS unequal angle sections are becoming increasingly popular. In such an arrangement, intermediate welds or screw fasteners are required at discrete points along the length, preventing the angle sections from buckling independently. Limited research is available in the literature on axial strength of back-to-back built-up CFS unequal angle sections. The issue is addressed herein. This paper presents an experimental investigation reported by the authors on back-to-back built-up CFS unequal angle sections with intermediate stiffeners under axial compression. The load-axial shortening behaviour along with the deformed shapes at failure are reported. A nonlinear finite element (FE) model was then developed, which includes material non-linearity, geometric imperfections and modelling of intermediate fasteners. The FE model was validated against the experimental test results, which showed good agreement, both in terms of failure loads and deformed shapes at failure. The validated finite element model was then used for the purpose of a parametric study comprising 96 models to investigate the effect of longer to shorter leg ratios, stiffener provided in the longer leg, thicknesses and lengths on axial strength of back-to-back built-up CFS unequal angle sections. Four different thicknesses and seven different lengths (stub to slender columns) with three overall widths to the overall depth (B/D) ratios were investigated in the parametric study. Axial strengths obtained from the experimental tests and FE analyses were used to assess the performance of the current design guidelines as per the Direct Strength Method (DSM); obtained comparisons show that the current DSM is conservative by only 7% and 5% on average, while predicting the axial strengths of back-to-back built-up CFS unequal angle sections with and without the stiffener, respectively.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.178-181
• /
• 2003

Intermediate cooling for current lead is used of thermal link in conduction cooling and cooled of itself in liquid cooling because it is put in liquid. If a existing formula for cooling load and optimal diameter-length of current lead is applied, it generate some more cooling load. Therefore, variation of thermal link height and holding depth in liquid is considered. This result is used of reducing cooling load of current lead occupying most of superconducting system load and applying liquid/conduction cooling systems.

• Wind and Structures
• /
• v.18 no.2
• /
• pp.117-134
• /
• 2014

It is believed that offshore wind farms may satisfy an increasing portion of the energy demand in the next years. This paper presents a comparative study of the fatigue performances of tripod and jacket steel support structures for offshore wind turbines in waters of intermediate depth (20-50 m). A reference site at a water depth of 45 m in the North Atlantic Ocean is considered. The tripod and jacket support structures are conceived according to typical current design. The fatigue behavior is assessed in the time domain under combined stochastic wind and wave loading and the results are compared in terms of a lifetime damage equivalent load.