• Title/Summary/Keyword: Interference Range

Search Result 644, Processing Time 0.026 seconds

Dynamic Channel Allocation Considering the Interference Range in Multi-cell Downlink Systems (다중 셀 하향링크 시스템에서 간섭 영역을 고려한 동적 채널 할당)

  • Lee, Neung-Hyung;Bahk, Sae-Woong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.32 no.2A
    • /
    • pp.179-187
    • /
    • 2007
  • As wireless networks evolve to orthogonal frequency division multiple access(OFDMA) systems, inter-cell interference control becomes a critical issue in radio resource management. The allocation of the same channels in neighbor cells cause inter-cell interference, so the channel allocation needs to be taken carefully to lower the inter-cell interference. In distributed channel allocation, each cell independently tries to allocate channels that suffer low interference level. In this paper, under the assumption of static users, we introduce the concept of interference range and use it in designing our two algorithms; basic and combined. The basic algorithm performs interference range detection and determines whether to use the considered channel, while the combined algorithm checks the channel quality in addition to detecting the interference range. The two algorithms dynamically perform channel allocation with low complexity and show good throughput and fairness performance.

A study on interference analysis between FHSS atd DSSS short range radio devices (FHSS 및 DSSS 방식 소출력 무선기기간 간섭분석에 관한 연구)

  • Choi, Jae-Hyuck;Koo, Sung-Wan;Chung, Kyou-Il;Kim, Jin-Young
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 2009.08a
    • /
    • pp.242-247
    • /
    • 2009
  • In this paper, we investigate interference between short-range radiocommunication devices (SRDs) with frequency hopping spread spectrum (FHSS) and direct sequence spread spectrum (DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-Carlo (MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate (BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than bandwidth does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

  • PDF

Interference Analysis based on the Monte-Carlo Method (Monte-Carlo 기반의 간섭분석에 관한 연구)

  • Kim, Seong-Kweon
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.3 no.2
    • /
    • pp.58-64
    • /
    • 2008
  • In this paper, we proposed the methodology of interference analysis based on monte-carlo method for effective use of Industrial, Scientific, Medical (ISM) band. The interference scenario is divided according to the distance and density. The simulation of interference analysis evaluates the interference probability according to distribution density of Interfering Transmitters (It) in the Secure Interference Area (SIA). The SIA is gained from the Interference Efficiency Range that satisfied to Interference Permissible Range of Victim Receiver (Vr). Simulation result that apply the proposed interference scenario to the WLAN and bluetooth, Interference Permissible Range was 60~400m. And the WLAN was acceptable within interference permissible range to six bluetooth that exist in the SIA. In the same condition, when applied Listen Before Talk (LBT) based on Cognitive Radio (CR) to the bluetooth using Frequency Hopping (FH), interference probability was decreased sharply. The Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) that has been developed based on the monte-carlo method by European Radio-communications Office (ERO) were used to the interference simulation.

  • PDF

Suggestion for deep learning approach to solve the interference effect of ammonium ion on potassium ion-selective electrode

  • Kim, Min-Yeong;Heo, Jae-Yeong;Oh, Eun Hun;Lee, Joo-Yul;Lee, Kyu Hwan
    • Journal of the Korean institute of surface engineering
    • /
    • v.55 no.3
    • /
    • pp.156-163
    • /
    • 2022
  • An ammonium ion with a size and charge similar to that of potassium can bind to valinomycin, which is used as an ion carrier for potassium, and cause a meaningful interference effect on the detection of potassium ions. Currently, there are few ion sensors that correct the interference effect of ammonium ions, and there are few studies that specifically suggest the mechanism of the interference effect. By fabricating a SPCE-based potassium ion-selective electrode, the electromotive force was measured in the concentration range of potassium in the nutrient solution, and the linear range was measured to be 10-5 to 10-2 M, and the detection limit was 10-5.19 M. And the interference phenomenon of the potassium sensor was investigated in the concentration range of ammonium ions present in the nutrient solution. Therefore, a data-based analysis strategy using deep learning was presented as a method to minimize the interference effect.

Influence of Interferential Current Therapy and Laser Therapy on Functional Recovery after Total Knee Replacement

  • Oh, Seung-Keun;Kim, Yong-Nam
    • The Journal of Korean Physical Therapy
    • /
    • v.26 no.3
    • /
    • pp.175-181
    • /
    • 2014
  • Purpose: The purpose of this study is to investigate the effects of interference current therapy and laser therapy on functional recovery after total knee arthroplasty by measuring the Berg balance scale and range of motion. Methods: Subjects were 30 patients who were admitted to G Hospital after total knee arthroplasty. They were randomly assigned to experimental group I in which interference current therapy was applied (n=10), experimental group II in which laser therapy was applied (n=10), or the control group (n=10). The Berg balance scale and range of motion of the subjects were measured before, after 2 weeks, and after 4 weeks of therapy. Results: There was a statistically significant change (p<0.05) in the Berg balance scale and range of motion before and after therapy intervention among the laser therapy group and the interference current therapy group. There was also a significant change between the groups in the Berg balance scale and range of motion. Tukey's post hoc comparison showed a statistically significant difference between the control group and experimental group I and between the control group and experimental group II (p<0.05). Conclusion: The application of interference current therapy and laser therapy resulted in a significant change in both the Berg balance scale and range of motion among patients with total knee arthroplasty. The findings of this study can be used as preliminary clinical data in evaluating functional recovery in patients with total knee arthroplasty in a post-clinic setting.

Influence of the Geoacoustic Parameters of Seabed Appearing in the Broadband Interference Pattern by Moving Targets (이동 표적에 의한 광대역 간섭패턴의 지음향 인자 영향)

  • Hahn, Joo-Young;Lee, Hyeong-Uk;Lee, Bong-Ki
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.10 no.3
    • /
    • pp.43-50
    • /
    • 2007
  • A range-frequency interference pattern is analyzed in the course of the propagation of ship noise in shallow water. It has been shown to exhibit striated bands of intensity maxima and minima in the spectrogram. The slope of the striations is an invariant of the modal interference and is described by a waveguide invariant parameter $\beta$. It turns out that this interference pattern is useful for identifying the physical properties of the waveguide such as seabed properties. In this article, the interference pattern is analyzed using image processing techniques to produce the distribution of the beta and the effects of sediment types and geoacoustic parameters on beta distribution are examined and characterized by moments of the distributions.

Performance Analysis of Detector in Automobile Pulse Radar with Considering Interference (차량용 펄스 레이더에서 간섭영향에 대한 검출기의 성능 분석)

  • Lee, Jonghun;Ko, Seokjun
    • IEMEK Journal of Embedded Systems and Applications
    • /
    • v.14 no.1
    • /
    • pp.11-18
    • /
    • 2019
  • In this paper, we consider interferences from other automobile pulse radars using same frequency spectrum. In order to eliminate the interference, we propose the PN code modulation method. This method uses the cross-correlation between PN codes with different seed. The ROC performance is used for comparing the proposed detector to conventional method. And the proposed detector can decide the present or absent of targets and measure the range of the targets by using memory buffer of range gate. Especially, we use false alarm probability for all range gates. That is the false alarm if in any one range gate the false alarm occurs. From the simulation result, we can see that the proposed detector with using PN code is not influenced by interferences.

A Study on Ozone Passive Sampler (II) -Interference and Field Application (오존간이 측정기에 대한 연구(II)-간섭현상 및 현장 적용성)

  • Jeong, Sang-Jin;Yang, Hee-Jun
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.22 no.6
    • /
    • pp.904-911
    • /
    • 2006
  • Passive sampler is simple and inexpensive measuring equipment for air pollution. In this study we developed colorimetric ozone passive sampler which was coated a colorimetric reagent to a filter substrate. Interference of criteria all pollutant ($SO_2,\;NO_2,\;CO$) on ozone passive sampler was investigated through experimental chamber. Field measurement of developed ozone passive samper was compared automatic sampler result in Suwon area. The results shows interference of $SO_2$ gas is larger than other gases. Developed passive sampler can be roughly applicable to wind speed range from 0.8 to 3.3 m/s, temperature range from 3.9 to $27.5^{\circ}C$ and relative humidity range from 48 to 84%.

A Study on Interference Analysis between FHSS and DSSS Short Range Radio Devices (FHSS 및 DSSS 방식 소출력 무선기기간 간섭 분석에 관한 연구)

  • Kim, Jin-Young;Kim, Eun-Cheol;Yang, Jae-Soo;Ryu, Chung-Sang;Oh, Seong-Taek
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.2
    • /
    • pp.271-279
    • /
    • 2008
  • In this paper, we investigate interference between short-range radiocommunication devices(SRDs) with frequency hopping spread spectrum(FHSS) and direct sequence spread spectrum(DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-carlo(MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space. The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate(BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than band-width does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

Pulse-to-Pulse Coding for Channel Interference Suppression of Short Range Radar for GVES (지상 기동 장비용 근거리 레이더의 채널 간섭 억제를 위한 펄스간 코딩 연구)

  • Park, Gyu-Churl;Ha, Jong-Soo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.9
    • /
    • pp.883-889
    • /
    • 2009
  • Since the SRRs(Short Range Radar) load on the GVESs(Ground Vehicle Equipment System) are operated within several hundred meters, it is important to suppress the interferences between the SRRs. These interference are reduced using the frequency separation between channels, however this method isn't a perfect solution owing to a difficulty of a realization for the interference suppression. Thus, a pulse-to-pulse coding used to suppress the interference fundamentally is proposed in this paper. The concept, the application method and the test results of the proposed method have been described in this paper.