• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.76-81
• /
• 1988

As a means of human interface, this study designs Developed-ERES/WCS with voice recognition capability and fuzzy set theory. In the advanced teleoperator system, when an error occurs on the automatic mode, the error is recovered after the automatic mode is changed into the manual mode intervened by a human. The purpose of this study is to reduce human work load and to shorten error recovery time during error recovery.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.733-736
• /
• 1999

In this Paper, Bit selectable and Bi-directional Interface Port is described, which can communicate data with the peripheral devices. Specially A description of the asynchronous design method is given to remove the clock skew phenomenon and the output asynchronous control method which finds the optimal clock and controls all the enable signal of the output pins at the same time is presented. Using this technique interface ports have delay time of less-than 0.5㎱.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.171-174
• /
• 1998

The development of the high-frequency induction-heating for 2700kW power range intend to make localization at forging and rolling mill part by technical innovation. And, the development makes to increase our's competitive power at technique, quality and cost. This paper describes the heart of high-frequency induction-heating technique, switching technique, a few problem in common using as an unsatisfied technique, load adjustment technique, system control, diagnostic system, and auto-interface etc.

• 한국공간구조학회논문집
• /
• 제12권1호
• /
• pp.43-50
• /
• 2012

최근 컴퓨터 기술의 발달로 인해 복잡한 형태를 가지는 기념비적인 건축물이 설계, 시공됨에 따라 비정형건축에 관한 사회적인 관심이 해외뿐만 아니라 국내에서도 증가하고 있다. 하지만 비정형 구조시스템의 구현하기 위한 기술 및 연구에 대한 사례가 부족하여 많은 어려움이 있다. 이러한 문제를 해결하기 위해 본 연구에서는 3D모델링 프로그램과 최적설계를 수행하는 프로그램간의 인터페이스 모듈에 대한 연구를 수행하였다. 3D 모델링 프로그램에서 자동 메쉬를 생성하고, 모델링에 대한 정보를 바로 추출하여 최적화를 수행하였다. 결과적으로 개발된 인터페이스 모듈의 검증을 위해 예제 모델을 선정하여 형상최적화을 수행하였다.

• 대한인간공학회지
• /
• 제22권1호
• /
• pp.31-42
• /
• 2003

This study describes a modification of the technique for human error analysis in nuclear power plants (NPPs) which adopts advanced Man-Machine Interface (MMI) features based on computerized working environment, such as LCOs. Flat Panels. Large Wall Board, and computerized procedures. Firstly, the state of the art on human error analysis methods and efforts were briefly reviewed. Human error analysis method applied to NPP design has been THERP and ASEP mainly utilizing Swain's HRA handbook, which has not been facilitated enough to put the varied characteristics of MMI into HRA process. The basic concepts on human errors and the system safety approach were revisited, and adopted the process of FMEA with the new definition of Error Segment (ESJ. A modified human error analysis process was suggested. Then, the suggested method was applied to the failure of manual pump actuation through LCD touch screen in loss of feed water event in order to verify the applicability of the proposed method in practices. The example showed that the method become more facilitated to consider the concerns of the introduction of advanced MMI devices, and to integrate human error analysis process not only into HRA/PRA but also into the MMI and interface design. Finally, the possible extensions and further efforts required to obtain the applicability of the suggested method were discussed.

• 대한전자공학회논문지
• /
• 제12권4호
• /
• pp.35-40
• /
• 1975

ZnTe-lnSb Heterojunction을 계면합금법으로 제작했다. Insb의 In이 ZnTe결정에 확산되어 계면에 고저항 ZnTe충을 성장시켜 P-i-n구조를 갖고 있으며 전류수송기구는 p형 ZnTe 가전자대로부터 고저항 ZnTe충에 주입된 Hole의 SCLC기구에 의존된다. 순방향과 역방향 전압을 인가할때 실온에서 오런지색 전 장발장이 관측되었다. The Zn7e-lnSb heterojunctions was prepared by interface alloying technique. The structure of this beterojunction had p-i-n which semi-insulating ZnTe laver at interface of this heterojunction was formed by diffusing In of InSb into ZnTe crystal. The current transport mechanism of this heterojunction was Spacecharge-Limited-Current(SCLC) mechanism by hole at semi-insulating ZnTe layer. The hole wart injected from valence band of p- type SnTe crystal. Orange color electroluminescence was observed at this heterojunction when forward and reversed bias voltage applied.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.432-442
• /
• 2023

Characterizing the behavior of nuclear reactor plate fuels is vital to the progression of advanced fuel systems. The states of pre- and post-irradiation plates need to be determined effectively and efficiently prior to and following irradiation. Due to the hostile post-irradiation environment, characterization must be completed remotely. Laser-based characterization techniques enable the ability to make robust measurements inside a hot-cell environment. The Laser Shock (LS) technique generates high energy shockwaves that propagate through the plate and mechanically characterizes cladding-cladding interfaces. During an irradiation campaign, two Idaho National Laboratory (INL) fabricated MP-1 plates had a fuel breach in the cladding-cladding interface and trace amounts of fission products were released. The objective of this report is to characterize the cladding-cladding interface strengths in three plates fabricated using different fabrication processes. The goal is to assess the risk in irradiating future developmental and production fuel plates. Prior LS testing has shown weaker and more variability in bond strengths within INL MP-1 reference plates than in commercially produced vendor plates. Three fuel plates fabricated with different fabrication processes will be used to bound the bond strength threshold for plate irradiation insertion and assess the confidence of this threshold value.

• 한국컴퓨터정보학회논문지
• /
• 제15권6호
• /
• pp.153-158
• /
• 2010

본 논문에서는 기존의 인터넷 쇼핑몰의 지루함을 극복하기 위해 Ajax 기술을 이용하여 새로운 느낌의 쇼핑몰을 제작한다. Ajax(Asynchronous Javascript and XML) 기술은 긴 로딩 속도를 줄임과 동시에 플래시에만 의존하던 기존 웹사이트와 차별화가 되며, 보다 편리한 사용자 인터페이스 구현까지도 가능하다. 따라서, 본 논문은 Ajax를 이용하여 향수 쇼핑몰을 설계 및 구현하므로써, 자신이 원하는 상품을 손쉽게 추가 및 삭제가 가능하고 눈으로 확인할 수 있도록 한다. 또한 장바구니에 단순한 드래그앤 드롭 방식을 적용하여 사용자에게 편리함을 제공함과 동시에 쇼핑에 대한 흥미를 불러 일으키도록 한다.

• Wind and Structures
• /
• 제22권3호
• /
• pp.349-368
• /
• 2016

A preconditioning technique is presented for a simultaneous solution to wind-membrane interaction. In the simultaneous equations, a linear elastic model was employed to deal with the fluid-structure data transfer at the interface. A Lagrange multiplier was introduced to impose the specified boundary conditions at the interface and strongly coupled simultaneous equations are derived after space and time discretization. An initial linear elastic model preconditioner and modified one were derived by treating the linearized elastic model equation as a saddle point problem, respectively. Accordingly, initial and modified fluid-structure interaction (FSI) preconditioner for the simultaneous equations were derived based on the initial and modified linear elastic model preconditioners, respectively. Wind-membrane interaction analysis by the proposed preconditioners, for two and three dimensional membranous structures respectively, was performed. Comparison was made between the performance of initial and modified preconditioners by comparing parameters such as iteration numbers, relative residuals and convergence in FSI computation. The results show that the proposed preconditioning technique greatly improves calculation accuracy and efficiency. The priority of the modified FSI preconditioner is verified. The proposed preconditioning technique provides an efficient solution procedure and paves the way for practical application of simultaneous solution for wind-structure interaction computation.

• 접착 및 계면
• /
• 제18권4호
• /
• pp.171-178
• /
• 2017

최근 들어, 다층박막법(Layer-by-Layer(LbL) assembly)을 이용한 표면 젖음성 제어 기술이 큰 관심을 받고 있다. 다층박막법은 고분자, 계면활성제, 나노 입자 등과 같은 다양한 재료를 이용하여 수직 구조와 표면 특성을 나노 및 마이크로 스케일로 제어할 수 있는 다기능적이며 친환경적인 제조방법이다. 본 논문에서는 다층박막법을 이용하여 표면 특성을 제어하는 기술의 최근 동향을 살펴보고자 한다. 특히, 초발수, 초친수, 초발유/초친수 LbL 표면의 제조와 응용에 대한 기술 동향과 연구 결과를 기술한다. 또한, omniphobic, 자가-치유, 지능형 및 외부 반응형 표면 등 최근 각광을 받고 있는 분야의 기본적인 원리와 제조 방법 등에 대해 소개하고자 한다.