• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.2
• /
• pp.9-16
• /
• 2004

As the industry is developed, uses of various electric motor are increasing from general home to various fields of industry, and the kind becomes various daily. For these reasons, it is required to study the remote control and a package management about change of a speed drive system the supervision of administration appliance by real time, and the collection and process data together using internet prevailed on industry whole. Also, we can expect big effect in time and space, side of cost-cutting by control directly and manage appliance through internet. This paper deals with the development of a Web-Based remote control system for permanent magnet synchronous motor drives. The client/server system using TCP/IP protocols and DSP controller for remote control through internet and the Web interface that users can confirm data and state of PMSM is developed. This system is available for driving, braking, variable speed control and monitoring for PMSM in real time through administration program of Web-Based.

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.4
• /
• pp.3-11
• /
• 2005

In this study, a large-scale laboratory model test and 2-D numerical analysis were conducted to verify the reinforcement effect by utilizing geotextile bag on the railway roadbed. Static loading which simulated train load was applied on the geotextile-reinforced railway roadbed and also unreinforced railway roadbed. Computer program named Pentagon 2-D which is a part of FEM programs was used in the numerical analysis. Based on the results of laboratory test and 2-D numerical analysis, the effect of load distribution and settlement reduction was found to be depending on the geotextile characteristics, tensile strength of geotextile, and interface friction angle between geotextile bags. In general, the result of 2-D numerical analysis shows lower value than that of laboratory test.

• Steel and Composite Structures
• /
• v.34 no.6
• /
• pp.853-862
• /
• 2020

In recent years, due to the many advantages cable-stayed bridges have often constructed in medium and long span. These advantages can be listed as an aesthetically pleasing appearance, economic and easy construction, etc. The main structural elements of cable-stayed bridges are listed as deck, pylon, cables and foundation. Perhaps one of the most vital and expensive of these structural elements is stay-cables. Stay-cables ensure the allowable displacement and distribution of bending moments along the bridge deck with prestressing force. Therefore the optimum design of the stay-cables and prestressing force are very important in achieving the performance expected from the cable-stayed bridges. This paper aims to obtain the stay-cables size and prestressing force optimization of the cable-stayed bridge. For this purpose, single pylon and fan type cable configuration Manavgat Cable-Stayed Bridge was selected as an example. The three dimensional (3D) finite element model (FEM) of the bridge was created with SAP2000. Analysis of the 3D FEM of the bridge was conducted under the different combined effects of the self-weight of the structural element, prestressing force of stay-cable and live load. Stay-cable stress and deck displacement were taken into account as constraints for the optimization problem. To optimize this existing bridge a metaheuristic algorithm named Jaya was used in the optimization process. 3D FEM of the selected bridge was repeatedly analyzed by using Open Applicable Programming Interface (OAPI) properties of SAP2000. To carry out the optimization process the developed program which integrates the Jaya algorithm and the required codes for calling SAP2000 is coded in MATLAB. At the end of the study, the total weight of the stay-cables was reduced more than 40% according to existing stay cables under loads taken into account.

• Journal of The Korean Association of Information Education
• /
• v.15 no.2
• /
• pp.227-239
• /
• 2011

In this paper, a mobile system is designed and implemented for children with learning disabilities. The system is designed to improve reading skills of those students. The reading skill is very basic and essential ability for various subjects. In this paper, the proposed mobile system is based on PREP that is known as a good theory for improving reading skills of children with learning disabilities. The system has the following characteristics. First, the system can improve the reading skills by providing successive tasks and simultaneous tasks. Second, the system can provide interests by introducing quiz-type study and considering accessibility, and individuality of learning disorder students. Third, the system has user-friendly interface so that the students have easy access to the system. The system is applied to some elementary school students. The following result is obtained: both of reading attitude and reading ability are improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.871-876
• /
• 2005

Theme park automation system is developed by using the RFID sensor reader, IIS web server, ASP.NET and MSSQL database in this paper. Its operation is that park entrance people checked automatically when he who possessed the ta8 passed the reader acquisition bound and its tag information is sent to the host computer through the RS-232 data acquisition system. Tag information and time data will be stored in the RFID database tables and reused to extract and distribute the entrance people for the purpose of each arrangement of each entertainment devices. First of all, we developed interface program between host and reader and then, programmed the related web site and database connection function using ASP.NET with $C\#$ and MSSQ. We also design and make an production of external Ant. to extend the acquisition range up to $30\~40$ cm using copper PCB plate. We confirmed the performance through the RFID test bed site.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.592-595
• /
• 2008

This paper presents development of automatic image quality register optimization system using mobile TFT-LCD (Thin Film Transistor-Liquid Crystal Display) driver IC and embedded software. It optimizes automatically gamma adjustment and voltage setting registers in mobile TFT-LCD driver IC to improve gamma correction error, adjusting time, flicker noise and contrast ratio. Developed algorithms and embedded software are generally applicable for most of the TFT-LCD modules. The proposed optimization system contains module-under-test (MUT, TFT-LCD module), control program, multimedia display tester for measuring luminance, flicker noise and contrast ratio, and control board for interface between PC and TFT-LCD module. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.81-89
• /
• 2015

This study takes shear wall of reinforced concrete structure as study object, and the purpose of this study is to suggest structure BIM based on automatic reinforcing bar placement system applying set-based design through the most optimum reinforcing bar placement group that was selected by applying AHP (analytical hierarchy process) method from design step. For this, the most optimum reinforcing bar placement group was selected by pairwise comparison analysis on complex standard of multiple alternatives. And shear wall automatic reinforcing bar placement system has been developed, which can automatically generate members and arrange reinforcing bar by structure design algorithm and using open API (application programming interface) provided by a BIM software vendor. As a result, the most optimum reinforcing bar placement group of the highest weight, ALT1, was selected and was generated using Tekla Structure program.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.7
• /
• pp.834-839
• /
• 2005

When a great variety of services become available to user through the broadband convergence network in the ubiquitous home environment, an intelligent agent is required to deal with the complexity of services and perceive intension of a user. Different from the old-fashioned command-based user interface for selecting services, conversation enables flexible and rich interactions between human and agents, but diverse expressions of the user's background and context make conversation hard to implement by using either user-initiative or system-initiative methods. To deal with the ambiguity of diverse expressions between user and agents, we have to apply hierarchial bayesian networks for the mixed initiative conversation. Missing information from user's query is analyzed by hierarchial bayesian networks to inference the user's intension so that can be collected through the agent's query. We have implemented this approach in ubiquitous home environment by implementing simulation program.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.11-17
• /
• 2012

This research describes how to predict a model of the tensile strain related to the fatigue cracking performance of several asphalt concrete structures through design of experiments(e.g., Response Surface Methodology) and harmony search(HS) algorithm. The axisymmetric analysis program of finite element method, which is the KICTPAVE, was used to determine the strain level at the interface layer between asphalt layer and lean concrete layer. Once the training database set of various strain levels was constructed under the several condition of layer stiffnesses and thicknesses in the asphalt concrete structures, the data set was trained through the HS algorithm in order to determine the regression coefficients defined based on a response surface methodology. Furthermore, the testing set, which was not used for the training procedure of HS algorithm, was also constructed in order to evaluate whether the regression coefficients of a prediction model can be appropriately applied for other cases in asphalt concrete structures.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.285-291
• /
• 2002

The shearing process for the sheet metal is normally used in the precision elements such as a frame of TFT-LCD or lead frame of If chips. In these precision elements, the burr formation prevents the system assembly and needs the additional burr removing process. In this paper, we developed the small size NC punching system which has an aligning kinematics between the rectangular shaped punch and die. The punch is driven by an ai cylinder and the sheet metal is moving on the X-Y table system which is driven by two stewing motors. The microprocessor control the whole system and communicate with the monitoring PC by RS232C serial communication protocol. The graphic user interface program in PC monitors nil control the punching system. The cross shaped joint hinge supports the punching die and positioned by two differential screws, whose are installed in perpendicular directions. The aligning between the punch and die is performed using the sheets of half thickness(0.1mm Brass) of the real process for the frame of the TFT-LCD. Using half thickness Brass, the burr formation is magnified and we can decide the aligning direction more easily then using the real thickness(0.2mm) Aluminum. In this paper, the aligning results are measured manually using the SEM photographs and we hope to make the automated aligning procedures using some kinds of image processing techniques.