• 제목/요약/키워드: Interface generation

검색결과 921건 처리시간 0.022초

Protocol Mapping을 이용한 인터페이스 자동생성 기법 연구 (A Study on Automatic Interface Generation by Protocol Mapping)

  • 이서훈;강경구;황선영
    • 한국통신학회논문지
    • /
    • 제31권8A호
    • /
    • pp.820-829
    • /
    • 2006
  • SoC 설계는 복잡도 증가 및 빠른 time-to-market에 만족하기 위해 IP에 기반한 설계방식을 채택하고 있다. Mobile 기기의 고성능에 대한 시장의 요구로 인해 embedded용 SoC는 멀티미디어, DMB 및 이미지처리 등 복잡도와 데이터 처리량이 높은 프로그램을 실시간으로 동작시키기 위해 다중 프로세서를 사용한 설계가 요구된다. 시스템 버스와 프로토콜이 상이한 프로세서를 단일 SoC내에서 사용하기 위해선 프로세서 프로토콜을 시스템 버스 프로토콜에 맞도록 변화하여 주는 인터페이스 회로의 설계가 요구된다. 고속으로 동작하는 프로세서의 인터페이스 회로는 데이터 쓰기와 읽기 시의 전송 지연을 최소화하여 시스템 전체의 성능을 향상시켜야 한다. 버퍼를 사용한 인터페이스 회로의 구조는 버퍼에 데이터를 일시 저장하는 동작으로 인하여 데이터 전송 latency가 증가하게 되므로 본 논문에서는 버퍼를 사용하지 않고 버스와 마스터 모듈 프로토콜이 가진 공통된 동작 시퀀스를 이용하여 단일 FSM 구조를 가진 인터페이스 회로를 자동생성하는 방법을 제안한다. 제안된 방법으로 자동생성된 인터페이스 회로는 버퍼를 사용한 인터페이스 회로에 비해 면적은 평균 48.5%의 감소를 보였으며, 데이터 전송 latency는 단일 데이터 전송 시 평균 59.1%의 감소를 보였고 버스트 모드 데이터 전송 시 13.3%의 감소를 보였다. 본 논문에서 제안한 시스템을 사용하여 데이터 전송 latency를 최소화하는 고성능의 인터페이스 회로를 자동으로 생성할 수 있다.

차세대 저궤도 소형위성 적용을 위한 전력시스템 설계 (Power System Design for Next Generation LEO Satellite Application)

  • 박성우;박희성;장진백;장성수
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2005년도 춘계학술대회논문집
    • /
    • pp.283-287
    • /
    • 2005
  • In this paper, one general approach is proposed for the design of power system that can be applicable for next generation LEO satellite application. The power system consists of solar panels, battery, and power control and distribution unit(PCDU). The PCDU contains solar array modules, battery interface modules, low-voltage power distribution modules, high-voltage distribution modules, heater power distribution modules, on-board computer interface modules, and internal DC/DC converter modules. The PCDU plays roles of protection of battery against overcharge by active control of solar array generated power, distribution of unregulated electrical power via controlled outlets to bus and instrument units, distribution of regulated electrical power to selected bus and instrument units, and provision of status monitoring and telecommand interface allowing the system and ground operate the power system, evaluate its performance and initiate appropriate countermeasures in case of abnormal conditions. We review the functional schemes of the main constitutes of the PCDU such as the battery interface module, the auxiliary supply module, solar array regulators with maximum power point tracking(MPPT) technology, heater power distribution modules, spacecraft unit power distribution modules, and instrument power distribution module.

  • PDF

선체중앙부 유한요소 구조해석을 위한 입력자동화 (An Automatic Data Generation Procedure for Finite Element Structural Analysis of Cargo Holds of a Ship)

  • 박성환;신종계
    • 대한조선학회논문집
    • /
    • 제31권4호
    • /
    • pp.99-108
    • /
    • 1994
  • 본 연구는 "유조선 구조해석을 위한 유한요소 입력자동화 프로그램의 개발"[1]의 연속된 연구결과로서, 유조선, 살물화물선, 콘테이너선등의 일반 상용 선박을 대상으로 유한요소법을 이용하여 선체중앙부(3-D cargo hold)구조해석을 수행할 때, 구조모델링과 해석을 위한 입력자료처리를 효율적으로 자동화하는 과정을 연구하였다. 본 논문에서는 전년도에 발표된 기본 알고리즘을 바탕으로 다양한 형태의 선종별 적용성, MSC/NASTRAN 인터페이스와 관련한 평면 유한요소 자동분할 기법, 파랑하중 직접계산 인터페이스 개발 및 입력자료 처리과정에 도입된 Graphic User Interface기법 등 새로이 개발된 내용에 대하여 자세히 기술하고, 다양한 실적선에 적용함으로써 프로그램의 유용성을 확인하였다.

  • PDF

전이 금속 산화물 기반 Interface-type 저항 변화 특성 향상 연구 동향 (Research Trends on Interface-type Resistive Switching Characteristics in Transition Metal Oxide)

  • 김동은;김건우;김형남;박형호
    • 마이크로전자및패키징학회지
    • /
    • 제30권4호
    • /
    • pp.32-43
    • /
    • 2023
  • 저항 변화 메모리 소자(RRAM)는 저항 변화 특성을 기반으로 빠른 동작 속도, 간단한 소자 구조 및 고집적 구조의 구현을 통해 많은 양의 데이터를 효율적으로 처리할 수 있는 차세대 메모리 소자로 주목받고 있다. RRAM의 작동원리 중 하나로 알려진 interface type의 저항 변화 특성은 forming process를 수반하지 않고 소자 크기를 조절하여 낮은 전류에서 구동이 가능하다는 장점을 갖는다. 그 중에서도 전이 금속 산화물 기반 RRAM 소자의 경우, 정확한 물질의 조성 조절 방법과 소자의 신뢰성 및 안정성과 같은 메모리 특성을 향상시키기 위해 다양한 연구가 진행 중에 있다. 본 논문에서는 이종 원소의 도핑, 다층 박막의 형성, 화학적 조성 조절 및 표면 처리 등의 방법을 이용하여 interface type 저항 변화 특성의 저하를 방지하고 소자 특성을 향상시키기 위한 다양한 방법을 소개하고자 한다. 이를 통해 향상된 저항 변화 특성을 기반으로 한 고효율 차세대 비휘발성 메모리 소자의 구현 가능성을 제시한다.

FSM을 이용한 표준화된 버스와 IP간의 인터페이스 회로 자동생성에 관한 연구 (A Study on Automatic Generation of Interface Circuits Based on FSM between Standard Buses and Ips)

  • 이서훈;문종욱;황선영
    • 한국통신학회논문지
    • /
    • 제30권2A호
    • /
    • pp.137-146
    • /
    • 2005
  • SoC 설계 복잡도의 증가로 인한 설계 비용 감소 및 짧은 time-to-market의 만족을 위해 IP에 기반한 설계 방식이 사용되고 있다. 기존에 설계 검증된 IP를 사용할 경우 시스템 버스와의 통신을 가능하게 하는 인터페이스 회로를 설계해 주어야 하며, 설계 비용을 감소시키기 위해서는 인터페이스 회로의 자동생성이 요구된다. 본 논문에서는 IP프로토콜을 기술하는 방법과 이 기술을 통하여 IP의 프로토콜 제어를 위한 FSM(Finite State Machine)을 생성하여 버스와의 인터페이스 회로를 자동생성하는 방법을 제안한다. 제안한 시스템에서는 프로토콜 분석의 어려움을 줄이기 위해 표준화된 버스의 FSM을 라이브러리화 하였다. 제안된 방법으로 AMBA AHB에 사용되는 슬레이브 형태 IP의 인터페이스 회로를 자동생성한 결과 매뉴얼로 설계한 인터페이스 회로에 비해 면적은 4.5%의 증가를 보였다. 100 Mhz의 버스 동작 속도와 34 Mhz의 슬레이브 모듈의 동작 속도 환경에서 16개의 32 비트 데이터를 버스트 모드로 전송시 latency는 평균 7.1%의 증가를 보였으나, 시스템 버스의 점유는 평균 64.9% 정도로 감소하였다. 본 논문에서 제안한 시스템을 사용하여 시스템 버스의 효율을 증가한 인터페이스 회로를 생성해 낼 수 있다.

음성기반 멀티모달 인터페이스 기술 현황 및 과제 (The Status and Research Themes of Speech based Multimodal Interface Technology)

  • 이지근;이은숙;이혜정;김봉완;정석태;정성태;이용주;한문성
    • 대한음성학회:학술대회논문집
    • /
    • 대한음성학회 2002년도 11월 학술대회지
    • /
    • pp.111-114
    • /
    • 2002
  • Complementary use of several modalities in human-to-human communication ensures high accuracy, and only few communication problem occur. Therefore, multimodal interface is considered as the next generation interface between human and computer. This paper presents the current status and research themes of speech-based multimodal interface technology, It first introduces about the concept of multimodal interface. It surveys the recognition technologies of input modalities and synthesis technologies of output modalities. After that it surveys integration technology of modality. Finally, it presents research themes of speech-based multimodal interface technology.

  • PDF

차세대 텔레매틱스 햅틱 인터페이스의 개념적 모델 개발 (Development of a Haptic Interface Conceptual Model for the Next Generation Telematics)

  • 진범석;고상민;지용구
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2006년도 학술대회 1부
    • /
    • pp.257-265
    • /
    • 2006
  • 다양한 정보기기들의 복합화 형태로 진화하는 차세대 텔레매틱스 시스템에서는 운전자의 안정성 확보와 workload 감소가 중요한 이슈로 대두되어 Interface의 단순화, GUI Interaction의 극복 등의 대한 문제해결이 중요시 되고 있다. 이를 위해 본 연구에서는 사용자의 mental model를 고려한 운전자의 자유로운 navigation을 지원할 eyes-free 기술인 haptic interface를 지원하는 모델 개발을 목표로 기존 haptic interface를 지원하는 기기들의 문제점을 도출하고 차세대 텔레매틱스 시스템의 분석을 통해 기능적 요구사항을 정의하였다. 이를 기반으로 사용자에게 haptic interface를 통한 interaction을 제공함으로써 차세대 텔레매틱스 시스템을 지원하는 conceptual model을 개발하였다. 또한 haptic device design시에 고려되는 평가지표들을 선별하여 평가지표의 계층적 구조도를 작성한 후 AHP평가 모델을 개발하여 haptic device design 시의 중요 고려사항을 도출하고 중요도를 산정하여 초기 design 단계에서의 prototype에 대한 객관적이고 정량적인 평가를 제공하였다.

  • PDF

Mashup Application for Geo-spatial Feature Generation on Web Browser using Google Maps API

  • Park, Yong-Jae;Lee, Ki-Won
    • 대한원격탐사학회지
    • /
    • 제24권5호
    • /
    • pp.389-396
    • /
    • 2008
  • In these days, various kinds of web applications based on web 2.0 paradigm have been developed. In web 2.0 paradigm pursuing participation, sharing, and openness on the web-as-platform, web mapping or web GIS application are regarded as top most applications, so that web applications, handling geo-spatial contents, with user-interaction interface and search engine of high performance have been provided for both public users and expert users in the special domains. Public and industrial needs for web mapping mashup application by open API, linked with the practical web computing technologies, are gradually increasing. In this study, a user interface in mashup for geo-spatial feature generation was implemented by using mainly Google maps API. Spatial database resources in this implementation are those of Google mapping server. As the results, public users on web client can create their own geo-spatial data sets in web vector formats, without the help of any GIS tools or access to proprietary databases. It is concluded that web-based mashup application in client-side using open API can be used as an alternative for geo-browsing system or portable feature generation system.

인터페이스 회로와 디바이스 드라이버 통합 자동생성 시스템 설계 (Design of an Integrated Interface Circuit and Device Driver Generation System)

  • 황선영;김현철;이서훈
    • 한국통신학회논문지
    • /
    • 제32권6B호
    • /
    • pp.325-333
    • /
    • 2007
  • 설계된 HW IP를 응용수준에서 제어하기 위해 OS상에서의 디바이스 드라이버가 요구된다. 디바이스 드라이버의 개발은 하드웨어와 OS에 대해 시스템 개발자의 정확한 이해가 필요하며 하드웨어 개발 기간과 비용의 많은 부분을 차지한다. 본 논문에서는 OS정보, 하드웨어 특징정보를 이용하여 OS에 따른 디바이스 드라이버를 인터페이스 회로와 함께 자동 생성하는 시스템의 구축에 대해 제시한다. 제안한 시스템에서는 효율적인 디바이스 드라이버 자동생성을 위해 디바이스 드라이버의 기본골격과 함수 모듈 코드, 헤더파일 테이블 등을 라이브러리로 구축하여 입력 데이터에 따라 선택되어 디바이스 드라이버가 자동생성 되도록 하였다. 제안된 방법으로 ARM922T 코어에 삼성 3.5인치 TFT-LCD를 장착하여 커널버전 ARM-Linux 2.4.19를 탑재한 후 디바이스 드라이버를 자동 생성하여 커널에 등록한 뒤 하드웨어에 write 연산을 실행하는데 걸린 시간을 비교한 결과 매뉴얼로 설계한 디바이스 드라이버에 비해 1.12%의 감소를 보였다. 커널 컴파일 후의 코드 사이즈는 0.17%의 증가를 보였다. 생성된 디바이스 드라이버는 응용프로그램 레벨에서 하드웨어를 제어할 때 발생하는 지연시간을 고려하면 실제 성능의 차이가 없음을 보인다. 본 논문에서 제안한 시스템을 사용하여 시스템 개발기간을 단축할 수 있다.