• 한국강구조학회 논문집
• /
• 제15권5호통권66호
• /
• pp.509-518
• /
• 2003

본 논문에서는 강 콘크리트 경계면에 대한 비선형 해석 모델을 바탕으로 합성 구조체에 대한 비선형 구조해석을 실시하여 강 콘크리트 경계면을 모사한 인터페이스 요소에 발생하는 접선응력선 상대슬립 분포 등 합성 구조체의 경계면 거동 특성을 해석적으로 규명하였다. 연구결과 본 논문의 해석 모델인 합성 바닥판에서는 T형강-콘크리트 경계면 보다는 하부강판-콘크리트 경계면에서 접선응력의 증가가 빠르게 나타났으며, 하부강판-콘크리트 경계면에서도 인장부보다는 중립부 경계면에서 접선응력의 증가가 빠르게 진행되었다. 횡방향으로는 하중재하 위치에서 외부 측면으로 갈수록 접선응력이 완화되는 현상을 나타내었으며 종방향으로는 중앙부에서 최소, 지지점에서 $0.6{\sim}0.7L$ 지점에서 최대를 나타냈으며 이후 지지점으로 갈수록 감소하는 경향을 나타내었고, 하층이 증가하면서 경계면의 파괴가 최고 접선응력지점에서 전체영역으로 점차 확대되는 경향을 나타내었다. 이상의 연구결과는 합성 구조체의 경계면의 거동 특성과 하중전달 메카니즘을 이해하고 합리적인 전단연결재 설계를 위한 바탕을 제공할 것으로 기대된다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권2호
• /
• pp.65-92
• /
• 2019

We survey a recently developed immersed finite element method (IFEM) for the interface problems. The IFEM uses structured grids such as uniform grids, even if the interface is a smooth curve. Instead of fitting the curved interface, the bases are modified so that they satisfy the jump conditions along the interface. The early versions of IFEM [1, 2] were suboptimal in convergence order [3]. Later, the consistency terms were added to the bilinear forms [4, 5], thus the scheme became optimal and the error estimates were proven. For elasticity problems with interfaces, we modify the Crouzeix-Raviart based element to satisfy the traction conditions along the interface [6], but the consistency terms are not needed. To satisfy the Korn's inequality, we add the stabilizing terms to the bilinear form. The optimal error estimate was shown for a triangular grid. Lastly, we describe the multigrid algorithms for the discretized system arising from IFEM. The prolongation operators are designed so that the prolongated function satisfy the flux continuity condition along the interface. The W-cycle convergence was proved, and the number of V-cycle is independent of the mesh size.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.281-285
• /
• 2008

Corrosion of metallic structures arises when an electric current flows from the metal into the electrolyte such as soil and water. The potential difference across the metal-electrolyte interface, the driving force for the corrosion current, can emerge due to a variety of temperature, pH, humidity and resistivity etc.. With respect to a given structure, a stray current is to be defined as a current flowing on a structure that is not part of the intended electrical circuit. Stray currents are caused by other cathodic protection installations, grounding systems and welding posts, referred to as steady state stray currents. But most often traction systems like railroads and tramlines are responsible for large dynamic stray currents. This type of stray current is generally results from the leakage of return currents from large DC traction systems that are grounded or have a bad earth-insulated return path. This paper investigates the reports, which is made for protecting the electrical corrosion by the DC traction stray current before the construction period.

• 한국강구조학회 논문집
• /
• 제15권5호통권66호
• /
• pp.499-507
• /
• 2003

합성 구조체에서 강 콘크리트 경계면은 하중이 증가함에 따라 합성작용 저하, 미세균열, 슬립 및 분리등으로 나타내어 부분합성에 적합한 해석기법이 필요하다. 그러나 경계면을 고려하는 해식방법과 경계면 비선형 해석 모델 구성의 어려움으로 지금까지 합성 구조체에 대한 해석적 연구는 경계면 거동을 완전합성, 또는 선형-탄생으로 가정하여 정확한 거동 규명이 어려웠다. 따라서 합성 구조체의 설계는 대부분 실험적 방법에 의존하였지만 이것은 사용환경에 따라 매번 실험을 수행해야 하는 비효율성이 있다. 본 논문에서는 합성작용의 변화에 따른 다양한 강-콘크리트 경계면의 비선형 해석 모델을 바탕으로 하여 최대 접선응력과 슬립-연화 현상에 따르는 보다 정밀한 구조성능과 거동 특성을 규명하였다. 연구결과 경계면에 대한 비선형 모델은 최대하중 등과 같은 행복 이후의 거동을 보다 정확하게 나타내며, 이때 인터페이스의 초기 접선강성은 부재의 항복하중에, 최대 접선응력과 슬립-연화 합성 구조체의 최대하중과 같은 항복이후 거동에 주로 영향을 미치는 것으로 나타났다. 따라서 협성 구조체의 구조성능은 강-콘크리트 경계면의 합성작용, 즉 인터페이스 요소의 초기 접선강성, 최대 접선응력과 슬립-연화현상에 크게 의존적인 것으로 나타났다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.216-223
• /
• 2003

In this paper, we introduce the software and hardware of the measuring system for performances of traction and braking in KTX(Korea Train eXpress). The measuring system focuses on the verification of the performance and acquisition of test data. The software controls the hardware of the measuring system, performs the analysis and calculation of measurement data and acts as interface between users and the hardware. For this purpose, three programs, such as a measuring program, a back-up program and a post-processing program, have developed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.411-417
• /
• 2009

This paper describes the development of integrated simulator for traction power supply system with GUI (Graphic User Interface). This simulator consists of a lot of calculation modules such as TPS, time table, line constant, and power supply system analysis. Each module has input and output structure respectively. The proposed simulator is tested on both high speed railway line and metropolitan subway line. The test has confirmed the function of the developed simulator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.580-584
• /
• 2002

This paper proposes an experimental study on the traction system of rubber tired AGT (Automated Guideway Transit). IGBT VVVF inverter is developed for 1C2M propulsion system of AGT, and it consists of inverter stack, gate control unit, control unit, and interface unit. The combination test was carried out to prove the performance of inverter, and test results show that the developed inverter is excellent.

• 센서학회지
• /
• 제13권4호
• /
• pp.270-276
• /
• 2004

In this paper, we introduce the software and hardware of the measuring system for on-line test and performances evaluation of traction and braking in KTX(Korea Train Express). The measuring system focuses on the verification of the performance and acquisition of test data. The hardware is connected many kinds of sensors, such as speed sensor, thermocouple. The software controls the hardware of the measuring system, performs the analysis and calculation of measurement data and acts as interface between users and the hardware. For this purpose, three programs, such as a measuring program, a back-up program and a analysis program, have developed.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.76-81
• /
• 2010

This paper describes the development of integrated simulator with GUI(Graphic User Interface) for traction power supply system. This simulator consists of a lot of calculation modules such as TPS, train time schedule, line constant, and power supply system analysis. Each module has input and output structure respectively. The algorithms of all modules have confirmed the validity to comparison with field test that is performed on both high speed railway line and conventional line.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.372-374
• /
• 2002

In this paper, we studied for performance of traction and braking for on-line test and evaluation of korean high speed rail vehicle. It is composed of 6 DAMs(Data Acquisition Modules), 2 monitoring modules and 1 main computer. The software should set and control the hardware of the measuring system, perform the analysis and calculation of measuring data and interface between users and the measuring system. As a result, It has been shown a good performance of traction and braking for test vehicle.