• 한국게임학회 논문지
• /
• 제19권6호
• /
• pp.99-106
• /
• 2019

본 논문에서는 두 타원체 사이의 중심 간 방향으로의 최단 접근 거리를 구하는 방법을 다룬다. 이는 타원체 사이의 충돌 검사 및 반응에 있어서 핵심 기술이다. 외부에서 서로 접하는 두 타원체의 중심 사이의 거리와 접촉점, 접촉방향에 관한 조건식을 세우고, 해를 포함하는 구간을 유지하는 이분법과 도함수를 이용하는 Newton 방법의 혼합을 통해 최단 접근 거리를 항상 안정적이며 효율적으로 구할 수 있게 한다. 또한 다양한 실험을 통해 제안된 방법의 안정성 및 효율성을 보인다.

• 한국게임학회 논문지
• /
• 제19권1호
• /
• pp.5-14
• /
• 2019

본 논문에서는 두 타원체 사이의 중심 간 방향으로의 최단 근접 거리를 구하는 실용적인 방법을 제안한다. 이는 타원체로 근사한 강체 및 변형체의 물리기반 동적 시뮬레이션에서 타원체 사이의 충돌을 처리 하는 핵심 기술이다. 본 논문에서는 외부에서 접하는 두 타원체의 중심 간 거리와 접촉점 및 접촉방향에 관한 조건식을 세우고 고정점 반복법 및 Aitken의 델타 자승 절차를 이용하여 최단 근접 거리를 구하는 방법을 개발한다. 또한 실제 오차에 따른 종료 조건을 도입함으로써 게임 등의 실시간 응용에서 최단 근접 거리를 더욱 빠르게 구할 수 있게 한다. 다양한 실험을 통해 제안된 방법의 효율성 및 실용성을 보인다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.615-618
• /
• 2005

In this work, the effects of corner transistors in SOI MOSFETs were investigated. We fabricated SOI MOSFETs with various widths and a fixed length and characterized them. The SOI thickness was $4000{\AA}$ and the buried oxide(BOX) thickness was $4000{\AA}$. The isolation of active region was simply done by silicon etching and TEOS sidewall formation. Several undesirable characteristics have been reported for LOCOS isolation in fabrication on SOI wafers so far. Although we used an STI-like process instead of LOCOS, there were still a couple of abnormal phenomena such as kinks and double humps in drain current. Above all, we investigated the location of the parasitic transistors and found that they were at the corners of the SOI in width direction by high-resolution SEM inspection. It turned out that their characteristics are strongly dependent on the channel width. We made a contact pad through which we can control the body potential and figured out the dependency of operation on the body potential. The double humps became more prominent as the body bias went more negative until the full depletion of the channel where the threshold voltage shift did not occur any more. Through these works, we could get insights on the process that can reduce the effects of corner transistors in SOI MOSFETs, and several possible solutions are suggested at the end.

• Journal of Information Display
• /
• 제10권3호
• /
• pp.111-116
• /
• 2009

In this paper, a plasma-assisted patterning method for the organic layers of organic light-emitting diodes (OLEDs) and its effect on the OLED performances are reported. Oxygen plasma was used to etch the organic layers, using the top electrode consisting of lithium fluoride and aluminum as an etching mask. Although the current flow at low voltages increased for the etched OLEDs, there was no significant degradation of the OLED efficiency and lifetime in comparison with the conventional OLEDs. Therefore, this method can be used to reduce the ohmic voltage drop along the common top electrodes by connecting the top electrode with highly conductive bus lines after the common organic layers on the bus lines are etched by plasma. To further analyze the current increase at low voltages, the plasma patterning effect on the OLED performance was investigated by changing the device sizes, especially in one direction, and by changing the etching depth in the vertical direction of the device. It was found that the current flow increase at low voltages was not proportional to the device sizes, indicating that the current flow increase does not come from the leakage current along the etched sides. In the etching depth experiment, the current flow at low voltages did not increase when the etching process was stopped in the middle of the hole transport layer. This means that the current flow increase at low voltages is closely related to the modification of the hole injection layer, and thus, to the modification of the interface between the hole injection layer and the bottom electrode.

• Radiation Oncology Journal
• /
• 제18권2호
• /
• pp.114-119
• /
• 2000

목적 : small bowel displacement system (SBDS)을 이용한 골반부 방사선 치료시 치료간(intertreatment) 및 치료중(intratreatment) 중심점 위치변동의 편차를 분석하고, 그 결과를 임상적으로 이용하고자 하였다. 대상 및 방법 :자궁경부암 7명, 직장암 4명의 총 11명의 환자를 대상으로 electronic portal imaging device (EPID)를 이용하여 302건의 후-전문(postero-anterior port) 영상과 232건의 측문(lateral port) 영상을 얻었다. 모든 환자는 복와위 자세로 하복부에 SBDS를 사용하였다 방사선 조사야의 중심점과 배율을 맞추기 위하여 5개의 금속 기준점을 영상탐지판(image detection unit)에 부착시켰으며, EPID 영상의 골 기준점(bony landmark)을 정하여 모의치료시 촬영한 영상과 비교하여 정렬시킨 후 우-좌문, 두-미문, 그리고 후-전문 방향으로 중심점의 이동방향 및 거리를 분석하였다. 결과 : 우-좌문, 두-미문, 그리고 후-전문 방향으로의 치료간 중심점 이동의 평균값은 각각 1.2 mm ($\pm$1.6 mm), 1.0mm ($\pm$3.0 mm), 0.9 mm ($\pm$4.4 mm)이었으며, 각 방향으로의 5 mm 이상의 치료간 중심점 이동은 각각 2, 12, 24$\%$, 그리고 10 mm 이상의 치료간 중심점 이동은 각각 0, 0, 5$\%$이었다 큰 폭의 위치변동을 보인 방향은 후-전문 방향이었으며, 최대값은 11.5 mm 이었다. 우-좌문, 두-미문, 그리고 후-전문 방향으로의 치료중 중심점 이동의 평균값은 각각 0 mm ($\pm$0.9 mm), 0.1 mm ($\pm$1.9 mm), 0 mm ($\pm$1.6 mm)이었다. 5 mm 이상의 치료중 중심점 이동은 각각 0, 1 , 1$\%$이었다. 결론 : SBDS를 이용한 골반부 방사선 조사시 폭과 빈도가 가장 큰 치료간 위치변동은 후-전문 방향이므로, 측면의 후-전문 방향으로 추가적인 여유를 두는 것이 바람직할 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.188-191
• /
• 1993

Silicon flow sensor which can detect the magnitude and direction of two dimensional air flow was designed and fabricated by CMOS process and bulk micromachining technique. The flow sensor consists of three-layered dielectric diaphragm a heater at the center of the diaphragm and four thermopiles surrounding the heater at each side of diaphragm as sensing elements. This diaphragm structure contributes to improve the sensitivity due to excellent thermal isolation property of dielectric materials and its tiny thickness. The flow sensor has good axial symmetry to sense 2-D air flow with the optimized sensing position in the given structure. Measured sensitivity of our sensor is $18.7mV/(m/s)^{1/2}$.

• PNF and Movement
• /
• 제17권2호
• /
• pp.207-214
• /
• 2019

Purpose: Although multi-directional reaching exercises are commonly used clinically, the effects of specific movement directions on the muscle systems of the lower extremities have not been explored. We therefore investigated lower extremity muscle activity during reaching exercises with different sagittal and horizontal plane movements. Methods: The surface electromyography responses of the bilateral rectus femoris, tibialis anterior, peroneus longus, and gastrocnemius muscles were measured during reaching exercises in three directions in the horizontal plane (neutral, $45^{\circ}$ horizontal shoulder adduction, and $45^{\circ}$ abduction) and three directions in the sagittal plane (neutral, $120^{\circ}$ flexion, and $60^{\circ}$ flexion). A total of 20 healthy, physically active participants completed six sets of reaching exercises. Two-way repeated ANOVA was performed: body side (ipsilateral and contralateral) was set as the intra-subject factor and direction of reach as the inter-subject factor. Results: Reaching at $45^{\circ}$ horizontal shoulder adduction significantly increased the activity of the contralateral rectus femoris and gastrocnemius muscles, while $45^{\circ}$ horizontal shoulder abduction activated the ipsilateral rectus femoris and gastrocnemius muscles. The rectus femoris activity was significantly higher with reaching at a $120^{\circ}$ shoulder flexion compared to the other conditions. The gastrocnemius activity decreased significantly as the shoulder elevation angle increased from $60^{\circ}$ to $120^{\circ}$. Conclusion: Our results suggest that multi-directional reaching stimulates the lower extremity muscles depending on the movement direction. The muscles acting on two different joints responded to the changes in reaching direction, whereas the muscles acting on one joint were not activated with changes in reaching direction.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.156-161
• /
• 2003

It is an interest problem to predict substance distributions in three-dimensional space. Recently, a research field as Geostatistics is advanced. It is a kind of inter- or extrapolation mathematically. Some useful means for the inter- and extrapolation are known, in which slide window method with neural networks is hopeful one. We propose multi-dimensional extrapolation using multi-layer neural networks and the slide-window method. The multi-dimensional extrapolation is not similar to one-dimension. It has plural algorithms. We researched line predictors and local-plain predictors I two-dimensional space. The both predictors are equivalent; however, in multi-dimensional extrapolation, it is very important to find the direction of predictions. Especially, since the slide window method requires information to predict the future in sampling data, if they are not ordered appropriately in the direction, the predictor cannot operate. We tested the extrapolation for typical two-dimensional functions, and found an excellent character of slide-window method based on local-plain. By using the method, we can extrapolate the function until twice-outer regions of the definitions.

• 한국지진공학회논문집
• /
• 제24권6호
• /
• pp.293-303
• /
• 2020

Seismic fragility was assessed for non-seismic reinforced concrete shear walls in Korean high-rise apartment buildings in order to implement an earthquake damage prediction system. Seismic hazard was defined with an earthquake scenario, in which ground motion intensity was varied with respect to prescribed seismic center distances given an earthquake magnitude. Ground motion response spectra were computed using Korean ground motion attenuation equations to match accelerograms. Seismic fragility functions were developed using nonlinear static and dynamic analysis for comparison. Differences in seismic fragility between damage state criteria including inter-story drifts and the performance of individual structural members were investigated. The analyzed building had an exceptionally long period for the fundamental mode in the longitudinal direction and corresponding contribution of higher modes because of a prominently insufficient wall quantity in such direction. The results showed that nonlinear static analyses based on a single mode tend to underestimate structural damage. Moreover, detailed assessments of structural members are recommended for seismic fragility assessment of a relatively low performance level such as collapse prevention. On the other hand, inter-story drift is a more appropriate criterion for a relatively high performance level such as immediate occupancy.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.992-995
• /
• 2005

Partnering has taken root all over the world as a remedy for the adversarial relation between parties concerned with construction projects. It is deemed to be derived from Keiretsu in Japan where parties related cooperate with one another as a team gaining reputations for completing projects on schedule and budget while maintaining high standard of quality. However, Keiretsu is now being weakened in proportion to the economic recession and there is an important change that needs to happen in the industry. The aims of this study are to find out the essence of Keiretsu by comparing Keiretsu with Partnering and to look for the direction of the reform plan.