• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.349-353
• /
• 2015

The conventional intensity histogram does not indicate edge information, which is important in the perception of image contrast. In this paper, we propose a multi-cue histogram (MCH) to represent a collaborative distribution of both the intensity and the edges of an image. Based on the MCH, if the intensity values have high frequency and a large gradient magnitude, they are spread into a larger dynamic range. Otherwise, the intensity values are not strongly stretched. As a result, image details, such as edges and textures, can be enhanced while artifacts and noise can be prevented, as demonstrated in the experimental results.

• Journal of information and communication convergence engineering
• /
• 제22권1호
• /
• pp.70-79
• /
• 2024

Bad weather conditions such as haze lead to a significant lack of visibility in images, which can affect the functioning and reliability of image processing systems. Accordingly, various single-image dehazing (SID) methods have recently been proposed. Existing SID methods have introduced effective visibility improvement algorithms, but they do not reflect the image's perspective, and thus have limitations that distort the sky area and nearby objects. This study proposes a new SID method that reflects the sense of space by defining the correlation between image brightness and haze. The proposed method defines the haze intensity by calculating the airlight brightness deviation and sets the weight factor of the depth map by classifying images based on the defined haze intensity into images with a large sense of space, images with high intensity, and general images. Consequently, it emphasizes the contrast of nearby images where haze is present and naturally smooths the sky region to preserve the image's perspective.

• Journal of information and communication convergence engineering
• /
• 제20권3호
• /
• pp.195-203
• /
• 2022

Noise generated during image acquisition and transmission can negatively impact the results of image processing applications, and noise removal is typically a part of image preprocessing. Denoising techniques combined with nonlocal techniques have received significant attention in recent years, owing to the development of sophisticated hardware and image processing algorithms, much attention has been paid to; however, this approach is relatively poor for edge preservation of fine image details. To address this limitation, the current study combined a steering kernel technique with adaptive masks that can adjust the size according to the noise intensity of an image. The algorithm sets the steering weight based on a similarity comparison, allowing it to respond to edge components more effectively. The proposed algorithm was compared with existing denoising algorithms using quantitative evaluation and enlarged images. The proposed algorithm exhibited good general denoising performance and better performance in edge area processing than existing non-local techniques.

• 한국항행학회논문지
• /
• 제20권4호
• /
• pp.380-385
• /
• 2016

그림자는 자연 영상에서 관찰되는 물리적인 현상이지만 위성 영상 분석에 부정적인 영향을 미치는 요소로 컴퓨터 비전의 전처리 과정에서 그림자 검출 과정은 매우 중요하다. 본 논문에서는 싱글 영상 기반의 위성 영상에서 효과적인 영상 분석을 위해 그림자를 검출하는 방법으로 크로스 엔트로피와 밝기 영상을 이용해 그림자를 검출하는 방법을 제안하였다. 칼라 영상을 그레이 레벨 영상으로 변환한 후 크로스 엔트로피를 기반으로 최적의 임계값을 추정하여 첫 번째 그림자 후보 영역으로 판별하였고, 칼라 영상의 밝기 영상을 이용해 최종 그림자 영역을 검출하였다. 제안하는 방법의 타당성을 위해 위성 영상들을 대상으로 실험하였고, 실험 결과 제안하는 그림자를 검출 방법이 효과적으로 수행됨을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1886-1898
• /
• 2015

In today’s era of advanced technological developments, the threats to the authenticity and integrity of digital images, in a nutshell, the threats to the Image Forensics Research communities have also increased proportionately. This happened as even for the ‘non-expert’ forgers, the availability of image processing tools has become a cakewalk. This image forgery poses a great problem for judicial authorities in any context of trade and commerce. Block matching based image cloning detection system is widely researched over the last 2-3 decades but this was discouraged by higher computational complexity and more time requirement at the algorithm level. Thus, for reducing time need, various dimension reduction techniques have been employed. Since a single technique cannot cope up with all the transformations like addition of noise, blurring, intensity variation, etc. we employ multiple techniques to a single image. In this paper, we have used Fuzzy logic approach for decision making and getting a global response of all the techniques, since their individual outputs depend on various parameters. Experimental results have given enthusiastic elicitations as regards various transformations to the digital image. Hence this paper proposes Fuzzy based cloning detection and classification system. Experimental results have shown that our detection system achieves classification accuracy of 94.12%. Detection accuracy (DAR) while in case of 81×81 sized copied portion the maximum accuracy achieved is 99.17% as regards subjection to transformations like Blurring, Intensity Variation and Gaussian Noise Addition.

• 한국분무공학회지
• /
• 제29권2호
• /
• pp.91-97
• /
• 2024

When investigating the droplet, spray, and impact of liquid on a solid plate, backlight imaging has been widely used to understand these phenomena. However, some previous studies have suffered from poor image quality. In this study, various combinations of image processing algorithms, such as white image correction, histogram equalization, CLAHE, Otsu's binarization, and multi-Otsu's binarization, have been applied to flash boiling spray images to enhance image quality for qualitative observation and semi-quantitative spray angle evaluation. To acquire images with high contrast for qualitative observation, applying CLAHE was effective, making small droplets and detailed shapes of the jet noticeable. However, when images were averaged to determine spray angle or penetration length based on intensity, this method induced artifact unphysical patterns, thus requiring careful consideration. Based on the algorithm proposed in this study, the spray angle variation according to injection pressure and temperature has been calculated, showing a reasonable trend.

• 정보처리학회논문지B
• /
• 제18B권5호
• /
• pp.265-270
• /
• 2011

본 논문에서는 이진화기반 영역분할을 이용한 3D입체영상의 밝기 보정방법을 제안한다. 제안된 방법은 입력된 좌우 3D입체영상 중 우 영상을 이진화를 통한 영역분할을 하고 크기가 작은 영역들은 제거한다. 다음 우 영상의 각 영역들에 대해 대응되는 좌 영상내의 영역을 상관계수(correlation coefficient)를 이용한 정합을 통해 추출한다. 영역단위의 매칭을 할 때 영역들 간의 겹침을 방지하기 위하여 모폴로지 필터로 영역경계에 인접한 일정부분을 제거한다. 그리고 좌우 영상의 영역 간 히스토그램 명세화를 수행함으로써 우 영상의 밝기 보정을 한다. 실험에서 좌 영상으로부터 블록단위 움직임보상으로 우 영상을 생성했을 때 제안한 방법이 블록평균 정합오차가 가장 작은 것을 확인 할 수 있었다.

• 한국멀티미디어학회논문지
• /
• 제20권9호
• /
• pp.1481-1490
• /
• 2017

This paper presents an image quality enhancement algorithm for dark image acquired under poor lighting condition. Various retinex algorithms which are human perception-based image processing methods were proposed to solve this problem. Although MSR(Multi-Scale Retinex) among these algorithm works well under most lighting condition, it shows color degradation because their separate nonlinear processing of RGB color channels. To compensate for the loss of the color, MSRCR(Multi-Scale Retinex with Color Restoration) was proposed. However, it requires high computational load and has additional parameters that need to be adjusted according to input image. In order to overcome this problem, a new retinex algorithm based on MSR is proposed in this paper. The proposed method consists of V channel MSR, saturation correction, and separate contrast enhancement process. Experimental results show that the subjective and objective image quality of the proposed method better than those of the conventional methods.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2001년도 추계학술발표논문집 (상)
• /
• pp.767-770
• /
• 2001

Edge detection is one of issues with essential importance in the area of image process. An edge in image is a boundary or contour which a significant change occurs in image intensity. In the paper, we process edge detection algorithms which are based on Potts automata. The dynamical behavior of these automata is completely determined by Lyapunov operators for sequential and parallel update. If Potts Automata convergence to fixed points, then it can be used to image processing. From the generalized Potts automata point of view, we propose a Potts Automata technique for detecting edge. Based on the experimental results we discuss the advantage and efficiency.

• 한국컴퓨터정보학회논문지
• /
• 제16권7호
• /
• pp.149-156
• /
• 2011

본 논문은 모바일 환경 하에서 효과적인 그래프 기반의 이미지 분할 적용 시, 실행시간 및 메모리 사용량 향상시키고, 이를 이용해 surface layout의 전처리 작업으로 수퍼 픽셀을 얻기 위한 효율적인 방법을 제안한다. 그래프기반의 이미지 분할은 영상으로부터 오브젝트 영역을 추출하는 알고리즘으로 입력 영상의 각 화소 정보를 이용한 에지 생성 및 그래프를 구성한다. 그래프 구성 시 기준 화소 및 주변 화소 위치 정보 및 색상 강도 차이 값(edgeweight)을 이용하여 에지를 구성하며, 색상 강도 차이 값에 따른 문턱치 값을 기준으로 각 에지를 연결함으로써 객체 영역을 추출하고 있다. 따라서 에지의 수는 그래프 기반의 이미지 분할의 실행시간 및 메모리 사용량을 결정하게된다. 모바일 디바이스는 PC에 비해 프로세서 속도 및 메모리 사용량 등 하드웨어적인 제약사항이 많으며, 프로그램 응답 시간이 주요 이슈가 되고 있다. 이러한 모바일 디바이스 상의 영상 처리 기술 적용 시 빠른 프로그램 응답시간 제공은 반드시 이루어져야 하며, 이미지 분할 단계에서도 보다 빠른 응답 시간을 위한 프로세싱 시간과 메모리사용량을 줄여야만 한다. 본 논문은 그래프 상의 에지의 수를 효과적으로 선택하는 효과적인 에지 선택 알고리즘 적용을 통해 그래프 기반의 이미지 분할 알고리즘을 모바일 디바이스에 적용 시, 프로세싱 시간 및 메모리 사용량의 개선을 보이도록 하고, 수퍼 픽셀 당 정확도가 입력영상 사이즈에 관계없이 70%이상 생성되며, 그 정확도가 96%동일하다는 것을 보인다.