• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.358-363
• /
• 2003

Optimal tuning plays an important role in operations or tuning of the complex process such as the main steam temperature of the thermal power plant. However, it is very difficult to maintain the steam temperature of power plant using conventional optimization methods, since these processes have the time delay and the change of the dynamic characteristics in the reheater. Up to the present time, the Pm controller has been used. However, it is not easy to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper suggests immune algorithm based tuning technique for PID Controller on steam temperature process with long dead time and its results are compared with genetic algorithm based tuning technique.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.165-168
• /
• 2001

본 논문은 비선형 헬리콥터 시스템의 퍼지 비례-적분-미분 (PID) 제어기의 설계기법을 제안한다. 퍼지 제어기는 풍부한 자유도를 포함하므로 비선형 시스템의 제어에 매우 적합하다. 그러나 이의 설계는 전문가의 지식에 의존하므로 시스템의 정확한 지식의 획득에 어려울 경우 우수한 성능을 보장하는 제어기의 설계가 매우 어렵다. 따라서 본 논문에서는 제안된 퍼지 PID 제어기의 성능 향상 및 최적화를 위하여 전역적 비선형 최적화 기법인 유전 알고리듬 (GA)을 도입한다. 본 논문에서 제안한 퍼지 PID 제어기의 설계기법은 실제 비선형 헬리콥터 실험 장치에 적용하여 그 효용성 및 실제 산업분야에의 응용 가능성을 보인다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.1
• /
• pp.69-75
• /
• 2005

This paper is concerned with the design of a predictive PID controller, which has similar features to the model-based predictive controller. A PID type control structure is defined which includes prediction of the outputs and the recalculation of new set points using the future set point data. The optimal values of the PID gains are pre-calculated using the values of gains calculated from an unconstrained generalized predictive control algorithm. Simulation studies demonstrate the performance of the proposed controller and the results are compared with generalized predictive controller and the results are compared with generalized predictive control solutions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.6 no.2
• /
• pp.36-42
• /
• 1996

In this paper, we proposed a PID controller, which could control unknown plants using Artificial Neural Network(ANN) for auto-tuning of the PID parameters. In the proposed algorithm, the parameters of the controller were adjusted to reduce the error of the controlled plant. In this process, the sensitivity between input and output of the unknown plant was needed. So, in order to obtain this sensitivity, the ANN's learnig ability was used. Computer simualtions were performed for the regulation problems, and the results were compared with those of Ziegler-Nichols PID controller. As a result, it was shown that the proposed algorithm outperformed Ziegler-Nichols controller in rise time, overshoot, undershoot, and setting time.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.03a
• /
• pp.43-46
• /
• 1998

This paper presents a new parameter tuning method for PID controller. The Ziegler-Nichols Parameter tuning has been widely known as a fairly heuristic method to good determine setting of PID controllers, for a wide range of common industrial processes It has a excessive overshoot in the set point response, set point weighting can reduced the overshoot to specified values. It will also be shown that set point weighting is superior to the conventional solution of reducing large overshoot by other method. In this paper, we will modified the Ziegler-Nichols tuning formula by fuzzy set. These method will give appreciable improvement in the performance of PID controllers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.246-247
• /
• 2015

Type of Automatic Voltage Regulator (AVR) can be divided into Analog and Digital Type. Automatic Voltage Regulator (AVR) of the synchronous generators of the brushless type are to be reduced to the voltage fluctuation on the basis of the total load. The PID control method is a general control technique is commonly widely used. In this study, the control target parameter iPID does not reset the parameters of the controller for the variable (Intelligent PID) using the controller synchronous generator Digital automatic voltage to you like all applied to the adjusting device (AVR) the voltage change is small, improved responsiveness was studied in this controller.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.4
• /
• pp.271-274
• /
• 2007

In this paper, we propose a intelligent controller design method for the water level control of the power plant drum in the form of nonminimum phase system. The proposed method is based on T. Takagi and M. Sugeno's fuzzy model. And we illustrate the improved characteristics as the simulation results, comparing with the conventional the PID and LQ controller design method.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.61-65
• /
• 1997

This paper proposes an intelligent controller for brushless DC motor and load with unknown nonlinear dynamics. The proposed intelligent control system consists of a plant identifier and PID controller with varying gains. The identifier is constructed using an Auto Regressive Moving Average (ARMA) model. In order to tune the parameters of the identifier and the gains of the PID controller efficiently, e also propose a modified Evolution Strategy. Experimental results show that the proposed intelligent controller for brushless DC motor has good control performance under unknown disturbance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.102-109
• /
• 2014

In this paper, an algorithm to design fuzzy PID controllers is proposed. The proposed controllers are composed of fuzzy rules of which consequences are linear PID controllers and are designed with help of TSK fuzzy controllers. TSK fuzzy controllers are designed from TSK fuzzy model using pole assignment and have outstanding ability making the output response of nonlinear systems similar to the desired one. However, because of its structure complexity the TSK fuzzy controller is difficult to be used in industry. The proposed controllers have PID controller structure which can be easily realized, and are designed by using the data obtained from control simulations with TSK fuzzy controllers. To verify the proposed algorithm, two example simulations are performed.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.11a
• /
• pp.423-426
• /
• 2005

In this paper, we proposed a PID tuning algorithm by the fuzzy set theory to improve the performance of the PID controller. The new tuning algorithm for the PID controller has the initial value of parameter Kp, $\tau_{I}$, $\tau_{D}$. by the Ziegler-Nichols formula that uses the ultimate gain and ultimate period from a relay tuning experiment. We will get the error and the error rate of plant output corresponding to the initial value of parameter and fnd the new proportion gain(Kp) and the integral time ($\tau_{I}$) from fuzzy tuner by the error and error rate of plant oueut as a membership function of fuzzy theory. This fuzzy auto tuning algorithm for PID controller considerably reduced the overshoot and rise time as compared to any other PID controller tuning algorithms. And in real parametric uncertainty systems, it constitutes an appreciable improvement of performance. The significant property of this algorithm is shown by simulation