• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.19-33
• /
• 2012

Ministry of Land, Transport and Maritime Affairs prepared the method to update traffic connection system by amending "National Transport System Efficiency Act(hereinafter Act)". The key is a development of Intermodal Transfer Center. The law and guideline related with Intermodal Transfer Center requires the installation and operation of transfer information guide facility to improve user's convenience. However, there are no sufficient studies that can be used as references for the method to construct transfer support information system related with user's preference. The study performed the research about user's service satisfaction in relation with transfer support information service, which was embodied in model operation process, on the basis of transfer support information system of Intermodal Transfer Center applied to Gimpo Airport. The analysis result about service preference, importance of each supplied information, service satisfaction and consideration for service embodiment can be used as a guideline to embody the user information service of Intermodal Transfer Center. In addition, through CVM, the study estimated and proposed the service valuation of smart intermodal transfer service that provides customized information to cope with user's situation and traffic means operation status among transfer support information service. It is determined that the study will measure the benefit of Intermodal Transfer Center user by using monetary value when smart intermodal transfer service is supplied and provide the ground to expand high-tech transfer information service with high usefulness and convenience.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.15-29
• /
• 2021

The signal intersection is the most challenging space for autonomous vehicles. To promote the safe driving of autonomous vehicles on urban roads with traffic signals, autonomous vehicles need to receive traffic signal information from infrastructure through V2I communication. Thus, a protocol for providing traffic signal information was added to the standard traffic signal controller specification of the National Police Agency. On the other hand, there are technical limitations when applying this to digital traffic signal controllers because the protocols are defined mainly for analog traffic signal controllers. Therefore, this study proposes developing a signal information linkage module to provide traffic signal information from a digital traffic signal controller to an autonomous vehicle and an algorithm improvement method that can provide accurate traffic signal information at the time of traffic signal transition.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.58-76
• /
• 2019

As the number of reported injuries has tended to increase over time, large hospitalization expenditure from excessive medical treatments and hospitalization, and insurance frauds associated with moral hazard in minor collisions have caused a global societal problem. Many occupants of rear-ended vehicles involved in rear-end collisions complain of whiplash injury, which is also known as neck injury, without any anatomical and radiological evidence. With only clinical symptoms, stating that a whiplash injury is a type of injury defined by the Abbreviated Injury Scale would be difficult. Therefore, this study focuses on minor rear-end collisions, where the rear-ender vehicle collides with the rear-ended vehicle at rest. The mathematics dynamic model is employed to simulate a total of 100 rear-end collision scenarios based on various weights and collision speeds and identify how the weights and speeds of both vehicles influence the risk of whiplash injury in occupants involved in minor rear-end collisions. The possibility of an injury is very high when the same-weight vehicles are involved in accidents at collision speeds of 15 km/h or higher. The possibilities are 36% and 84% with collision speeds of 15 km/h and 20 km/h, respectively, if weights are disregarded.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.44-57
• /
• 2019

It is crucial to understand how people make decisions on mode choice and to accurately predict their behaviors in transportation planning. One of avenues for advancing modeling is, in particular, taking into account for taste heterogeneity in modeling that can incorporate different decision-making processes across group. In this study, we hypothesize that how people make decisions on mode choice would differ by destination in that land use characteristics are heterogeneous by zone even if zones are all in the same area. To this end, we apply Latent Class Modeling (LCM) to commute trips in Seoul by using 2010 household travel diary survey, investigate types of latent classes with the aid of characteristics of destination, and analyze how those classes differently response to factors. The LCM identifies two classes: in the first one, modal split of auto and public transit (bus and metro) is almost half-and-half and the trip destinations are characterized by relatively more residence facilities and less business/commercial facilities; in the second one, public transit has a notably high share and trip destinations are characterized by relatively more business/commercial facilities. In addition, it turns out that demographic and socio-economic variables affect mode choice differently by class.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.14-24
• /
• 2018

Pedestrian movement of passengers using smart card within stations can be divided into three types of activities - straight ride and alight, line transfer, and station transfer. Straight ride and alight is transfer activity for which the card terminal and embarking line are identical. In this case, straight ride occurs at the origin station and straight alight occurs at the destination station. Line transfer refers to activity in which the subway line embarked on by the passenger is different from that which is disembarked. Succinctly, line transfer is transfer at a middle station, rather than at origin or destination stations. Station transfer occurs when the card terminal line and embarking line are different. It appears when station transfer happens at the origin station as starting transfer, and at the destination station as destination transfer. In the case of Metropolitan smart card data, origin and destination station card terminal line number data is recorded, but subway line data does not exist. Consequently, transportation card data, as it exists, cannot adequately be used to analyze pedestrian movement as a whole in subway stations. This research uses the smart card data, with its constraints, to propose an analysis model for passenger pedestrian movement within subway stations. To achieve this, a path selection model is constructed, which links origin and destination stations, and then applied for analysis. Finally, a case study of the metropolitan subway is undertaken and pedestrian volume analyzed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.64-78
• /
• 2019

This paper explores key factors affecting taxi travel using global positioning system(GPS) data in Seoul, Korea, considering spatial dependence. We first analyzed the travel characteristics of taxis such as average travel time, average travel distance, and spatial distribution of taxi trips according to the time of the day and the day of the week. As a result, it is found that the most taxi trips were generated during the morning peak time (8 a.m. to 9 a.m.) and after the midnight (until 1 a.m.) on weekdays. The average travel distance and travel time for taxi trips were 5.9 km and 13 minutes, respectively. This implies that taxis are mainly used for short-distance travel and as an alternative to public transit after midnight in a large city. In addition, we identified that taxi trips were spatially correlated at the traffic analysis zone(TAZ) level through the Moran's I test. Thus, spatial regression models (spatial-lagged and spatial-error models) for taxi trips were developed, accounting for socio-demographics (such as the number of households, the number of elderly people, female ratio to the total population, and the number of vehicles), transportation services (such as the number of subway stations and bus stops), and land-use characteristics (such as population density, employment density, and residential areas) as explanatory variables. The model results indicate that these variables are significantly associated with taxi trips.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.5
• /
• pp.91-99
• /
• 2019

Existing node-to-node based optimal path searching is built on the assumption that all destination nodes can be arrived at from an origin node. However, the recent appearance of the adaptive path search algorithm has meant that the optimal path solution cannot be derived in node-to-node path search. In order to reflect transportation data at the links in real-time, the necessity of the node-to-link (or link-to-node; NL) problem is being recognized. This research assumes existence of a network with link-label and non-additive path costs as a solution to the node-to-link optimal path problem. At the intersections in which the link-label has a turn penalty, the network retains its shape. Non-additive path cost requires that M-similar paths be enumerated so that the ideal path can be ascertained. In this, the research proposes direction deletion and turn restriction so that regulation of the loop in the link-label entry-link-based network transformation method will ensure that an optimal solution is derived up until the final link. Using this method on a case study shows that the proposed method derives the optimal solution through learning. The research concludes by bringing to light the necessity of verification in large-scale networks.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.208-221
• /
• 2020

The objective of this study is to estimate and analyze the traffic density of continuous flow using the trajectory of individual vehicles and the headway of sample probe vehicles-front vehicles obtained from ADAS (Advanced Driver Assitance System) installed in sample probe vehicles. In the past, traffic density of continuous traffic flow was mainly estimated by processing data such as traffic volume, speed, and share collected from Vehicle Detection System, or by counting the number of vehicles directly using video information such as CCTV. This method showed the limitation of spatial limitations in estimating traffic density, and low reliability of estimation in the event of traffic congestion. To overcome the limitations of prior research, In this study, individual vehicle trajectory data and vehicle headway information collected from ADAS are used to detect the space on the road and to estimate the spatiotemporal traffic density using the Generalized Density formula. As a result, an analysis of the accuracy of the traffic density estimates according to the sampling rate of ADAS vehicles showed that the expected sampling rate of 30% was approximately 90% consistent with the actual traffic density. This study contribute to efficient traffic operation management by estimating reliable traffic density in road situations where ADAS and autonomous vehicles are mixed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.163-179
• /
• 2020

With the expansion of platform-based taxi service, mobility and convenience of users are getting better. However, due to profitability problem, marginalized areas in the supply of the service are expected to appear. As such, this study analyzed spatial marginalization of taxi service caused by imbalance in supply and demand during the night-time when public transportation service is suspended. According to hot-spot analysis of taxi, outskirt of a city and residential areas showed high vacancy and greater number of drop-offs compared to the number of pick-ups. On the contrary, they were confirmed low in the center and sub-centers of a city. Centrality analysis also showed a similar pattern with hot-spot analysis. Due to this, drivers may refuse to pick up a customer bound for an area with lower out-degree centrality compared to in-degree centrality as it might be difficult for the drivers to pick up another customer after dropping off the current customer. Thus, customers may need to wait for a taxi for a longer time. For this reason, improvement in spatial marginalization caused by mismatch of supply and demand is required. Also, the outcome of this study is expected to be utilized as a basic data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.203-213
• /
• 2021

A vehicle crash occurs due to various factors such as the geometry of the road section, traffic, and driver characteristics. A safety performance function has been used in many studies to estimate the relationship between vehicle crash and road factors statistically. And depends on the purpose of the analysis, various characteristic variables have been used. And various characteristic variables have been used in the studies depending on the purpose of analysis. The existing domestic studies generally reflect the average characteristics of the sections by quantifying the traffic volume in macro aggregate units such as the ADT, but this has a limitation that it cannot reflect the real-time changing traffic characteristics. Therefore, the need for research on effective aggregation units that can flexibly reflect the characteristics of the traffic environment arises. In this paper, we develop a safety performance function that can reflect the traffic characteristics in detail with an aggregate unit for one hour in addition to the daily model used in the previous studies. As part of the present study, we also perform a comparison and evaluation between models. The safety performance function for daily and hourly units is developed using a negative binomial regression model with the number of accidents as a dependent variable. In addition, the optimal negative binomial regression model for each of the hourly and daily models was selected, and their prediction performances were compared. The model and evaluation results presented in this paper can be used to determine the risk factors for accidents in the highway section considering the dynamic characteristics. In addition, the model and evaluation results can also be used as the basis for evaluating the availability and transferability of the hourly model.