• 한국콘텐츠학회논문지
• /
• 제22권7호
• /
• pp.486-497
• /
• 2022

본 연구의 목적은 대학 글쓰기 수업에서 내용지식으로부터 학생의 통합지식을 구성함에 있어 지식통합의 단위와 기준을 세분화하여 제시하는 것이다. 이를 위하여 전형성 있는 대학 글쓰기 교재 세 권을 분석하고 내용지식의 구성에 대한 제시방법을 텍스트 질적 분석방법을 통해 살폈다. 분석 절차와 제시방법은 Creswell의 질적 연구에서의 나선형 분석 모델을 따랐다. 이는 자료 수집부터 분석, 제시까지 순환적으로 반복되는 자료 분석 방법이다. 이를 통해 내용지식 구성단위에는 글 전체 단위, 단락 단위, 문장 단위의 세 가지 차원이 있음을 발견하였다. 또한 내용지식 구성의 체계화된 교육을 위해서 이 세 가지 단위 차원을 모두 다루는 것이 바람직함을 제시하였다. 다음으로 지식통합의 과정별 기준과 교육내용을 제안하였다. 지식의 선별 과정에서는 논지와의 적합성과 보충성의 기준을, 지식의 조직과 통합과정에서는 통일적 통합, 모순적 통합, 배경적 통합, 종합적 통합 등의 기준과 내용을, 지식의 표현과 인용 과정에서는 정확한 표현과 표기법, 출처표시 등의 절차 지식을 제안하였다. 나아가 표현의 차원에서 일반 글쓰기 교재에서 빈번하게 연습되는 '바꿔 말하기' 과정도 '요약, 연계, 해석과 변용'이라는 세 가지 차원에서 연습될 필요가 있음을 제안하였다. 그러나 이러한 결과는 몇 차례 더 세분화의 과정을 거쳐야 대학 수준의 글쓰기 교재에 활용하기 적합하고 체계화된 지식통합의 요목들을 정련할 수 있을 것으로 보이며 이를 추후 연구의 과제로 남긴다.

• 상하수도학회지
• /
• 제36권5호
• /
• pp.275-287
• /
• 2022

In order to overcome the small scale of Korea waterworks and to achieve comprehensive improvement and innovation transformation, the waterworks integration was reviewed. The effect of consolidation was confirmed by the integration of the water supply business in the southern Gangwon region and the western Gyeongnam region in Korea, such as an increase in the flow rate and a decrease in the production unit cost. After facing management and service limitations overseas, more than 1,000 small-scale waterworks projects in the UK were integrated into 27 waterworks providers, and Japan also revised the Waterworks Act in December 2019 and is in the process of integrating waterworks. It is considered appropriate to promote the integration of waterworks projects in Korea by respecting the autonomy of local governments, but using a participatory method, a win-win method, and a linkage method. For the integration of waterworks projects, three strategies are proposed: First creating a national foundation for integration (revision of the Waterworks Act), Second establishing a waterworks integration strategy led by local governments, Third forming an external consensus and providing incentives for participation.

• 한국해양공학회지
• /
• 제22권6호
• /
• pp.75-82
• /
• 2008

Flame bending has been extensively used in the shipbuilding industry for hull plate forming In flame bending it is difficult to obtain the desired shape because the residual deformation dependson the complex temperature distribution and the thermal plastic strain. Mechanical bending such as reconfigurable press forming multi-point press forming or die-less forming has been found to improve the automation of hull plateforming because it can more accurately control the desired shape than line heating. Multi-point forming is a process in which external forces are used to form metal work-pieces. Therefore it can be a flexible and efficient forming technique. This paper presents an optimal approach to determining the press-stroke for multi-point press forming of curved shapes. An integrated configuration of Finite element analysis (FEA) and spring-back compensation algorithm is developed to calculate the strokes of the multi-point press. Not only spring-back is modeled by elastic plastic shell elements but also an iterative algorithm to compensate the spring-back is applied to adjust the amount of pressing stroke. An iterative displacement adjustment (IDA) method is applied by integration of the FEA procedure and the spring-back compensation work. Shape deviation between the desired surface and deform￡d plate is minimized by the IDA algorithm.

• 소성∙가공
• /
• 제7권3호
• /
• pp.233-245
• /
• 1998

A new approach has been proposed for the incremental analysis of the nonsteady state large deformation of planar anisotropic elastic-plastic sheet forming. A mathematical brief review of a constitutive law for the incremental deformation theory has been presented from flow theory using the minimum plastic work path for elastic-plastic material. Since the material embedded coordinate system(Lagrangian quantity) is used in the proposed theory the stress integration procedure is completely objective. A new return mapping algorithm has been also developed from the general midpoint rule so as to achieve numerically large strain increment by successive control of yield function residuals. Some numerical tests for the return mapping algorithm were performed using Barlat's six component anisotropic stress potential. Performance of the proposed algorithm was shown to be good and stable for a large strain increment, For planar anisotropic sheet forming updating algorithm of planar anisotropic axes has been newly proposed. In order to show the effectiveness and validity of the present formulation earing simulation for a cylindrical cup drawing and front fender stamping analysis are performed. From the results it has been shown that the present formulation can provide a good basis for analysis for analysis of elastic-plastic sheet metal forming processes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 자동차부품 제작기술의 진보
• /
• pp.97-109
• /
• 1996

In the present work computations are carried out for analysis of complicated sheet metal forming process such as forming of a rear hinge. Finite element formulation using dynamic explicit time integration scheme and step-wise combined Implicit/Explicit scheme are introduced for numerical analysis of sheet metal forming process. The rigid-plastic finite element method based on membrane elements has long been employed as a useful numerical technique for the analysis of sheet metal forming because of its time effectiveness. The explicit scheme in general use is based on the elastic-plastic modelling of material requiring large computation time. In finite element simulation of sheet metal forming processes, the robustness and stability of computation are important requirements since the computation time and convergency become major points of consideration besides the solution accuracy due to the complexity of geometry and boundary conditions. The implicit scheme employs a more reliable and rigorous scheme in considering the equilibrium at each step of deformation, while in the explicit scheme the problem of convergency is eliminated at the cost of solution accuracy. The explicit approach and the implicit approach have merits and demerits, respectively. In order to combine the merits of these two methods a step-wise combined implicit/explicit scheme has been developed.

• 한국정밀공학회지
• /
• 제29권11호
• /
• pp.1221-1227
• /
• 2012

As demands on micro-products increase significantly with raising functional integration and increasing complexity, microfoming attracts a lot of attention in the manufacture of micro-products. Since the conventional big forming systems are not adequate to achieve sufficient tolerances of micro-scale parts, it is necessary to reduce the scale of the forming equipment and devices. In addition, understandings on the size effects, which exist in the material behavior and process characterization of microforming processes, need to be expanded. In this study, a miniaturized forming system based on the ball screw and servo motor actuator was developed for the efficient micro-parts production. In addition, tensile tests and cylindrical upsetting experiments were performed to evaluate the performance of the microforming system and to investigate the flow stress and friction size effects in microforming processes.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.111-120
• /
• 1998

This paper is the first one of two-parted research efforts focusing on the modeling of rubber pad forming process. The rubber pad, driven by the pressurized fluid during the forming process, pushes the sheet metal to solid tool half and forms a part to final shape. In this part of the paper, a numerical procedure for the FE analysis of the rubber pad deformation is presented. The developed three-dimensional FE model is based on the total Lagrangian description of rubber maerial characterized by nearly incompressible hyper-elastic behavior under a large deformation assumption. Validity of the model as well as effects of different algorithms corresponding to incompresibility constraints and time integration methods on numerical solution responses are also demonstrated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.188-191
• /
• 1997

In the recent sheet metal forming simulations, it increases to adopt the dynamic explicit method for an effective computation and the elastic-plastic formulation for stress recovery. It is inevitable in the dynamic explicit method that some noises occur and sometimes partly spoil results of simulations. It is severer when complicated contact conditions are included in simulations. An effective method to control these noises is introduction of damping effects. In this paper, the concept of contact damping is introduced in order to suppress noises due to complicated contact conditions. This is checked by analyzing a simple sheet metal forming process(U-bending). From the computational results, it is shown that the contact damping can effectively control the noises due to contacts and develop more reliable internal stress states.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1642-1650
• /
• 1995

Process design is one of the most important fields in metal forming, where the finite element method has appeared a useful method for industrial applications. In this study, a program using the rigid plastic finite element has been developed for process design in three-dimensional plastic deformation. The surface integration for calculation of the friction between die and workpiece has been implemented with care in numerical treatment. The developed program is applied to a precision coining process of electronic components. It is confirmed that the program developed here is suitable for process design in metal forming with three-dimensional plastic deformation.

• 소성∙가공
• /
• 제9권1호
• /
• pp.17-26
• /
• 2000

A series of parametric study was performed for the investigation on the influence of analysis parameters to the solution behavior in the elastic-plastic-static analysis of several sheet metal forming processes, such as deflection by a point force under plane strain and axisymmetric conditions, plane strain bending by a punch, axisymmetric stretching by a punch, axisymmetric bulging by hydraulic pressure, and axisymmetric deep drawing by a punch. The parameters considered are kind of element, number of elements, integration scheme for elemental equation and friction coefficient. Results obtained for different selections of those parameters were compared with each other, experimental measurements and analytical solution.