• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.195-207
• /
• 2012

This paper deals with attitude controller design and integrated performance tests on the nitrogen gas reaction control system of KSLV-I. Some major factors which are necessarily required in designing a stabilizing controller of reaction control system are investigated, and the corresponding equations are given. Experimental configurations and test conditions for system level integrated performance tests of the KSLV-I nitrogen gas reaction control system are summarized. It is shown that, based on the experimental data, operational performances of nitrogen gas reaction control system can be analyzed in terms of gas consumption, thrusting force, time delay, and specific impulse. It is also shown that a conformance of the controller to flight can be evaluated. Finally the onboard controller of KSLV-I reaction control system is shown to perform normally with enough stability margin via the first flight test result.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.1
• /
• pp.89-98
• /
• 2012

A steel wire-integrated deck plate that welds integrated triangle truss steel wires on a galvanized steel sheet is developed to reduce construction costs of slabs or formworks such as shores and supports, and it is already widely applied in many construction fields. In this research, experimental tests for 14 full scale specimens, which are in the same field conditions, are conducted on several parameters such as the diameter of top, bottom and lattice steel wire, cutting methods of ends. According to the result, changes in final destruction types of the test bodies and cutting methods of ends didn't affect structural performance of test specimens, and for a 4.0m-span test specimen, there was no big problems in using bottom bar D7 or D8.

• Research in Community and Public Health Nursing
• /
• v.32 no.1
• /
• pp.51-63
• /
• 2021

Purpose: This study aimed to develop an integrated health promotion program for cancer survivors residing in the community based on the shared care model, and evaluate its effectiveness. Methods: A quasi-experimental trial was conducted. The participants consisted of 35 cancer survivors with completed intensive cancer therapy at the cancer hospital. The intervention group (n=20) and the control group (n=15) were recruited from among a district home cancer patient registrations. The intervention group participated in an integrated health promotion program based on the MAPP (Mobilizing for Action through Planning and Partnership) development process. The program consisted of physical, psycho-social and body image units. The participants were assessed before the program, and immediately after the program. Data were collected between July 1 and September 2, 2018 using FACT-G quality of life (QOL), distress thermometer (DT), and resilience. The data were analyzed by performing a χ2 test, Fisher's exact test, Mann-Whitney test, and ranked ANCOVA using SPSS. Results: The intervention group reported a higher QOL overall and significantly higher social/family well-being than the control group. Distress was significantly lower in intervention group than in the control group. Resilience had no significant difference between the two groups. Conclusion: These findings indicate that the integrated health promotion program base on the shared care model and MAPP development process could be effective intervention for improving social/family well-being and the QOL, and reducing distress of cancer survivors at home. Community health center nurses need to provide intervention to support self-care competency for cancer survivors' comprehensive care with physical, psycho-social, and body image to help them adjust their life to a moderate risk group in the community.

• Journal of the Korea Convergence Society
• /
• v.11 no.12
• /
• pp.373-381
• /
• 2020

The purpose of this study was performed to examine the effects of simulation integrated with problem based learning(S-PBL) on self-leadership, critical thinking disposition, goal commitment for nursing students. The design was a one group pre-post test. The subjects consisted of one group of 90 fourth year nursing students of K Colleage. The period for this study was from March to June in 2019. The collected data were analyzed by Paired t-test, Pearson correlation coefficient. This study showed significantly higher self-leadership(t=-16.22, p<.001), critical thinking disposition(t=-11.36, p<.001), goal commitment(t=-7.06, p<.001). There was a significant positive correlation between self-leadership and critical thinking disposition(r=.438, p<.001), self-leadership and goal commitment(r=.285, p<.001). In conclusion, this study show that integrated with problem based learning(S-PBL) can be used for improvement the self-leadership, critical thinking disposition, goal commitment. It is suggested to check the effect of simulation integrated with problem based learning applying various nursing situations in the future.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.1
• /
• pp.14-19
• /
• 2008

Semiconductor testing area challenges many testing issues due to the minimization and ultra high performance of current semiconductors. Among these issues, signal integrity test on interconnections must be solved for highly integrated circuits like SoC. In this paper, we propose an effective pattern application method for signal integrity test on interconnects. Proposed method can be applied by using boundary scan architecture and very efficient test can be preceded with pretty short test time.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.414-424
• /
• 2017

This paper introduces an experimental device which can measure accurate aerodynamic forces without support interference in wide experimental region for wind tunnel test of micro aerial vehicles (MAVs). A stereo pattern recognition (SPR) method was introduced to a magnetic suspension and balance system (MSBS), which can eliminate support interference by levitating the experimental model, to establish wider experimental region; thereby MSBS-SPR integrated system was developed. The SPR method is non-contact, highly accurate three-dimensional position measurement method providing wide measurement range. To evaluate the system performance, a series of performance evaluations including SPR system measurement accuracy and 6 degrees of freedom (DOFs) position/attitude control of the MAV model were conducted. This newly developed system could control the MAV model rapidly and accurately within almost 60mm for translational DOFs and 40deg for rotational DOFs inside of $300{\times}300mm$ test section. In addition, a static wind tunnel test was conducted to verify the aerodynamic force measurement capability. It turned out that this system could accurately measure the aerodynamic forces in low Reynolds number, even for the weak forces which were hard to measure using typical balance system, without making any mechanical contact with the MAV model.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.8 no.4
• /
• pp.1-18
• /
• 2020

Purpose - The current study attempts to reveal the causal relationship and identify the interrelationships among individual value, product selection attribute, and re-purchase intention of consumers when purchasing kimchi. Research design, data, and methodology - The surveys were distributed and retrieved to kimchi consumers in Seoul and Gyeonggi Province who were over 20 years old and who had purchased kimchi before. The current study utilized the self-reporting survey as the research method. Result - First, as a result of hypothesis 1 test, both internal value and external value had a significant effect. Second, as a result of hypothesis 2 test, while internal value had a significant effect, external value did not have a significant effect. Third, as a result of hypothesis 3 test, while internal value had a significant effect, external value did not have a significant effect. Fourth, as a result of hypothesis 4 test, all quality, brand, and price had a significant effect. Fifth, as a result of hypothesis 5 test, while internal value had a significant effect, external value did not have a significant effect. Conclusion - The current study aims to establish marketing and service strategies to maximize profits and secure competitive advantage in the kimchi industry through changes in the management strategy of the Korean kimchi industry.

• The KIPS Transactions:PartC
• /
• v.11C no.4
• /
• pp.485-496
• /
• 2004

The wide spread of Internet makes susceptible to the attacks via communication Web from hackers using the vulnerability of both computer and network systems. In this paper, we design and implement an integrated security system, named as LISS(Linux-based Integrated Security System) in which an integrated security management is possible. This system is based on the open operating system, Linux and consists of open security tools, which is effective in security management of Linux based-servers. We also construct a test-bed in order to testify the performance of the LISS. It is revealed that the implemented system captures all the attack Patterns generated from Network Mapper.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.3
• /
• pp.326-334
• /
• 2015

This paper describes the verification and the validation about the development of the integrated interoperability system for live, virtual, and constructive simulations on the aircraft weapon system. The proposed integrated interoperability system provides the framework and application softwares for implementing a synthetic environment emulating real-world environment among distributed simulation models, which are a mission model and an air combat model of a constructive level, an tactical simulator of a virtual level, and simulated ACMI of a live level. In this paper, we verify requested functions through an developmental test and evaluation, and validate operability and usability through conducing integrated LVC scenarios on the integrated interoperability system.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.233-239
• /
• 2013

This paper proposes an accurate approach for predicting transferred power from a noise source to integrated circuits based on the characteristics of the power transfer network. A power delivery trace on a package and a printed circuit board are designed to transmit power from an external source to integrated circuits. The power is demonstrated between an injection terminal on the edge of the printed circuit board and integrated circuits, and the power transfer function of the power distribution network is derived. A two-tier calibration is applied to the test, and scattering parameters of the network are measured for the calculation of the power transfer function. After testing to obtain the indispensable parameters, the real received and tolerable power of the integrated circuits can be easily achieved. Our proposed estimation method is an enhancement of the existing the International Electrotechnical Commission standard for precise prediction of the electromagnetic immunity of integrated circuits.