• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.9
• /
• pp.932-940
• /
• 2011

This paper presents an integrated analysis of supply chain and financing decisions of multi-national corporation. We construct a model in which multiple currency storage units are installed to manage the currency flows associated with multi-national supply chain activities such as raw material procurement, process operation, inventory control, transportation and finished product sales. Core contribution of this study is to quantitatively investigate the influence of macroscopic economic factors such as exchange rates and taxes on operational decisions. The supply chain is modeled by the Process-Storage Network with recycle streams. The objective function of the optimization is minimizing the opportunity costs of annualized capital investments and currency/material inventories minus the benefit to stockholders interpreted by home currency. The major constraints of the optimization are that the material and currency storage units must not be depleted. A production and inventory analysis formulation, the periodic square wave (PSW) model, provides useful expressions for the upper/lower bounds and average levels of the currency and material inventory holdups. The expressions for the Kuhn-Tucker conditions of the optimization problem are reduced to a subproblem and analytical lot sizing equations. The procurement, production, transportation and financial transaction lot sizes can be determined by analytical expressions after the average flow rates are already known. We show that, when corporate income tax is taken into consideration, the optimal production lot and storage sizes are smaller than is the case when such factors are not considered typically by 20 %.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.47-56
• /
• 2013

The present study proposed a methodology to analyze the networking efficiency of arterial road networks. The methodology was motivated to design three-dimensional networks and to analyze the networking ability quantitatively, which is a novel approach compared to existing methods depending on the two-dimensional network definition and the qualitative analysis for improving arterial road networks. The method considered the interdependence between high-level freeways and low-level highways, the ITS-based information for traffic and road conditions, and the physical networking. These three factors were quantified by a networking index (NI), and the networking efficiency was measured by a networking rate (NR). The present study proved that the networking efficiency (NR) was influenced by travel information sharing (i.e., ITS) and physical factors. This supports the fact that the integrated improvements of physical and ITS factors are necessary for an arterial road. The proposed method was applied for an actual arterial road network. It was found that the nation-wide NR was higher than that for the metropolitan area, which might be due to the difficulty in switching between high- and low-level networks and the lack of ITS functions in the metropolitan area.

• International Journal of Computer Science & Network Security
• /
• v.23 no.11
• /
• pp.67-72
• /
• 2023

In the past decade, Autonomous Vehicle Systems (AVS) have advanced at an exponential rate, particularly due to improvements in artificial intelligence, which have had a significant impact on social as well as road safety and the future of transportation systems. The fusion of light detection and ranging (LiDAR) and camera data in real-time is known to be a crucial process in many applications, such as in autonomous driving, industrial automation and robotics. Especially in the case of autonomous vehicles, the efficient fusion of data from these two types of sensors is important to enabling the depth of objects as well as the classification of objects at short and long distances. This paper presents classification of objects using CNN based vision and Light Detection and Ranging (LIDAR) fusion in autonomous vehicles in the environment. This method is based on convolutional neural network (CNN) and image up sampling theory. By creating a point cloud of LIDAR data up sampling and converting into pixel-level depth information, depth information is connected with Red Green Blue data and fed into a deep CNN. The proposed method can obtain informative feature representation for object classification in autonomous vehicle environment using the integrated vision and LIDAR data. This method is adopted to guarantee both object classification accuracy and minimal loss. Experimental results show the effectiveness and efficiency of presented approach for objects classification.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.87-98
• /
• 1999

전통적인 교통계획 과정에서 이용되어 온 수요모형들은 대부분 수단선택과 통행배정을 나누어 실시하는 모형이 주를 이루어 왔다. 그러나 교통수단이 다양해짐에 따라 실제 통행자들은 통행 도중 환승을 통해 수단을 전환하는 경우가 발생하게 되며 이 경우 수단선택 과정과 통행배정 과정을 하나로 통합하여 분석할 필요가 있다. 따라서 기종점간 수단 분담율은 기점과 종점에서의 그 값이 다르지만 수단선택과 통행배정이 분리되어 있는 기존 모형을 적용할 경우, 출발과 도착시의 수단 분담율이 동일하게 나타나는 비현실적인 결과를 도출하게 된다. 이러한 문제는 통행수단을 통행의 기본단위로 보고, 수단통행량을 추정하기 때문에 그 수단을 이용하는 통행자들의 행태 대신 수단의 특성만이 모형화되기 때문이다. 따라서 기존의 교통계획 과정에서는 수단분담 과정과 통행배정과정이 분리됨에 따라 수단간 환승이 고려되지 않아 통행자들의 경로 구성과정을 정확히 표현하는데 어려움이 있었다. 또, 수단분담 모형으로 가장 많이 이용되는 로짓 모형의 경우 환승을 고려하면 비관련 대안간 독립성문제(CIA)가 발생하고, 환승경로 수요추정이 불가능해 사실상 통합 교통망과 같이 복수 수단이 운행하는 교통망은 분석하기 어렵게 된다. 본 연구에서는 이를 해결하기 위하여 사람통행(Person Trip)을 기반으로 하는 수단분담-통행배정 통합모형을 개발하고 기존의 결합모형과 그 결과를 비교하였다.

• Korea Trade Review
• /
• v.46 no.2
• /
• pp.263-280
• /
• 2021

With the advent of the era of the 4th Industrial Revolution, various support policies and programs are being introduced as the promotion of startups related to the 4th industry is promoted as a core policy of the government. Based on major technologies such as Artificial Intelligence(AI), Big Data, Internet of Things(IoT), Blockchain, and Automation leading the 4th industrial revolution, logistics and distribution companies are expanding the range of markets and services provided. The purpose of this study is to examine the current status of startups in the logistics field based on major technologies of the 4th Industrial Revolution, which are rapidly growing at home and abroad, and suggest implications for revitalizing logistics startups through a policy demand survey. As a result of the study, in order to foster domestic logistics startups, we propose policy support for integration of logistics startups, integrated management of information, provision of physical space, network platform, and practical education and mentoring.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.31 no.1
• /
• pp.91-103
• /
• 2006

Given a bill of materials (BOM) tree T labeled by the breadth first search (BFS) order from node 0 to node n and a general network ${\Im}=(V,A)$, where V={1,2,...,m} is the set of production facilities and A is the set of arcs representing transportation links between any of two facilities, we assume that each node of T stands for not only a component. but also a production stage which is a possible stocking point and operates under a periodic review base-stock policy, We also assume that the random demand which can be achieved by a suitable service level only occurs at the root node 0 of T and has a normal distribution $N({\mu},{\sigma}^2)$. Then our integrated model of facility location problems and safety stock optimization problem (FLP&SSOP) is to identify both the facility locations at which partitioned subtrees of T are produced and the optimal assignment of safety stocks so that the sum of production cost, inventory holding cost, and transportation cost is minimized while meeting the pre-specified service level for the final product. In this paper, we first formulate (FLP&SSOP) as a nonlinear integer programming model and show that it can be reformulated as a 0-1 linear integer programming model with an exponential number of decision variables. We then show that the linear programming relaxation of the reformulated model has an integrality property which guarantees that it can be optimally solved by a column generation method.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.67-83
• /
• 2018

This research is motivated by the question, "Where, when, and through what mode does an individual passenger moving within a subway station use to travel from starting to final destinations ?" To answer this, the stations passed by the individual passenger, the path taken, and modes used need to be known beforehand. In the metropolitan integrated public transportation fare system, Automated Fare Collection System(AFC) can be a source of information on transit modes, stations, and paths of individual passengers. AFC calculates a fare for the passenger based on travel data such as boarding and alighting stations, time, and mode used. In this research, an Selected Station Analysis(SSA) method, in which AFC data is used to observe passenger movement in the metropolitan public transportation subway station from the perspective of subway transfer stations, is proposed. SSA subdivides individual passenger movement in transfer stations and analyzes initial station/time and final destination station/time information using the trip chain perspective.

• Journal of the Korea Convergence Society
• /
• v.2 no.4
• /
• pp.15-19
• /
• 2011

The transportation and logistics industries, the constructions of a green transport methods for logistics systems are presented. They aims the greenhouse gas emissions 37% savings compared to BAU(Business As Usual) for a green growth of national strategy by 2020. An eco-driving training for truck drivers is a typical way. However there are few studies such as the integrated data collection automatically and the diagnostic Assessments and monitoring methods of logistics network status to show the effects of the eco-driving. To solve this problem, this paper provides previous research on logistics network diagnostics assessments and monitoring service and eco-driving. Then this paper shows developments of the logistics network diagnostic assessments and monitoring service business flow to promote eco-driving behaviors for truck drivers based on a smart phone application. Also, it shows an efficiency through an application results in field test.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.455-464
• /
• 2015

Investments into existing cultural facilities are determined based on administrative district-based indices like population and area. Such macro judgment indices, however, fail to consider accessibility of cultural facilities from neighboring administrative districts and thus create problems including wasted budgets and duplicated investments. More recently, the government has made it a goal to increase the level of citizen awareness of these facilities, but achieving this requires the integration of neighboring administrative districts such that characteristics including transportation network and buildings are reflected in a comprehensive manner. This research therefore looks into Urban Network Analysis (UNA) as a means to investigate accessibility of cultural facilities. Use of UNA will make it possible to analyze the transportation network as well as building distribution, explained by building density, settled population, and other important building factors, in tandem, leading to the concentration of cultural facilities and the surrounding economic district being more properly reflected, and thus allowing for greater explanatory power in determining the level of accessibility. To test this, four target research districts were chosen from within the Gyeonggi Province and analyzed in terms of the accessibility of their everyday cultural facilities. Of the four districts of Gunpo, Anyang, Uiwang, and Gwacheon, accessibility of the first two districts, was found to be high, while accessibility was found to be relatively low for the latter two districts. This finding indicates that cultural facilities investments should be concentrated in the districts of Gunpo and Anyang.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.5
• /
• pp.103-111
• /
• 2013

This paper provide a framework for an IGILMS(internet-based global integrated logistics management system) which can access and mediate cargo transportations among small- and medium-sized domestic/international logistics corporations as regards cargo, registration and search for space, public tender and negotiation, contract, payment and safety-guarantee, transportation through the internet, wireless communication means, or smart phone etc. In addition, we describe a model to provide customized services in the B2B e-market for IGILMS and the structure and the control of its fulfillment process, and provide technical architecture of the IGILMS for an internet-based global logistics management system. To validate an efficiency of the proposed system, we develop a simulation model and analyze the performance of the proposed system.