• Journal of the military operations research society of Korea
• /
• v.37 no.1
• /
• pp.87-97
• /
• 2011

In this paper, we propose a new close combat expert system to overcome the difference of combat damage assessments between combat units belong to their own model in Combined Arms Integrated Interoperability System(CAIIS) which will be deployed in the early future. When it happens to engage in a battle among combat units belong to their own model in CAIIS, the result of damage assessment is different severely. This is related to CAIIS's confidence and need to be overcome. We propose the expert system for close combat damage assessment with a decision tree. Simulation results show that the proposed expert system is valid well. Because the proposed expert system is made not as an independent system but as an inner module type of CAIIS, CAIIS will be simpler system than we expect. And we will hope to reduce the cost of CAIIS.

• Current Optics and Photonics
• /
• v.5 no.6
• /
• pp.606-616
• /
• 2021

A photonic integrated interferometric imaging system possesses the characteristics of small-scale, low weight, low power consumption, and better image quality. It has potential application for replacing conventional large space telescopes. In this paper, the principle of photonic integrated interferometric imaging is investigated. A novel lenslet array arrangement and lenslet pairing approach are proposed, which are helpful in improving spatial frequency coverage. For the novel lenslet array arrangement, two short interference arms were evenly distributed between two adjacent long interference arms. Each lenslet in the array would be paired twice through the novel lenslet pairing approach. Moreover, the image reconstruction model for optical interferometric imaging based on compressed sensing was established. Image simulation results show that the peak signal to noise ratio (PSNR) of the reconstructed image based on compressive sensing is about 10 dB higher than that of the direct restored image. Meanwhile, the normalized mean square error (NMSE) of the direct restored image is approximately 0.38 higher than that of the reconstructed image. Structural similarity index measure (SSIM) of the reconstructed image based on compressed sensing is about 0.33 higher than that of the direct restored image. The increased spatial frequency coverage and image reconstruction approach jointly contribute to better image quality of the photonic integrated interferometric imaging system.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.2
• /
• pp.247-254
• /
• 2006

For more accurate navigation, lever arm compensation is considered. The compensation method for GPS and an odometer is introduced and new compensation methods are proposed for an odometer to consider the effect of coordinate transformation errors and the scale factor error. The methods are applied to a GPS/INS/odometer integrated system and the simulation and experimental results show its effectiveness.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1990.04a
• /
• pp.195-208
• /
• 1990

Flexible Manufacturing System(FMS) is an integrated, computer controlled complex of automated material handling devices and numerically controlled machine tools that can simultaneously process medium-sized volumes of a variety of part types. This paper discusses planning problems that can be solved for efficient use of an FMS and present an integrated decision support system for FMS production planning and scheduling problems. FMSDS(Flexible Manufacturing Systems Decision Support System) consists of data handling modules, part selection module, loading module, load adjusting module, scheduling module and simulation module etc. This paper presents the solution methodology of each subproblems and integrated interfaces between subproblems using hierarchical approaches and loop controls considering the relationships between subproblems. A case study by this model is presented.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.2
• /
• pp.93-99
• /
• 2013

This paper describes a robust algorithm for an integrated underwater navigation system based on VKF (velocity Kalman filter). The proposed approach relies on a VKF, augmented by the altitude from an echo-sounder-based switching architecture to yield robust performance, even when DVL (Doppler velocity log) exceeds the measurement range and the measured value cannot be valid. The proposed approach relies on three parts: 1) PINS (pure inertial navigation system), 2) VKF design, and 3) VKF-aided integrated navigation filter design. To evaluate the proposed method, we compare the results of the VKF-aided navigation system with the simulation result from a PINS and conventional INS-DVL method.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.3
• /
• pp.261-267
• /
• 2002

In SOC(System On a Chip) designs, reducing time and cast for design verification is the most critical to improve the design productivity. this is mainly because the designs require co-verifying HW together with SW, which results in the increase of verification complexity drastically. In this paper, to cope with the verification crisis in SOC designs, we propose a new verification methodology, so called integrated co-verification, which lightly combine both co-simulation and co-emulation in unified and seamless way. We have applied our integrated co-verification to ARM/AMBA platform-based co-verification environment with a commercial co-verification tool, Seamless CVE, and a physical prototyping board. The experiments has shown clear advantage of the proposed technique over conventional ones.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.472-475
• /
• 2003

Electric Power Steering (EPS) mechanism has become widely equipped in passenger vehicle due to the environmental consciousness and higher fuel efficiency. This paper describes the development of co-simulation technique and simulation integration technique of EPS control system with dynamic vehicle model. A full vehicle model interacted with EPS control algorithm is concurrently simulated on a single bump road condition. Dynamic responses of vehicle chassis and steering system resulting from road surface impact are evaluated and compared with proving ground experimental data. The comparisons will show reasonable agreement on tie-rod load. rack displacement, handle-wheel torque and tire center acceleration. This developed simulation capability can be used for EPS performance evaluation and calibration as well as for vehicle handling performance integration and synthesis.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.169-172
• /
• 2013

Building Information Modeling (BIM) is an effective decision-making platform that helps to save project cost and enhance quality of construction. By generating and linking a wide variety of objects data, BIM can be effectively utilized, and it should be ensured that object properties maintain consistency throughout the project period of design, estimates, construction, maintenance and repair. This study examined how to utilize BIM data in a construction project, by linking cost and schedule data in web environment, to better utilize the information and maintain consistency of the BIM information. To do so, the model integrated WBS data and CBS data, linked them with BIM model to realize 5D simulation in web environment. As a result, cost and schedule data could be simultaneously acquired, and object properties-cost, schedule, location-as well. These are expected to contribute to developing a BIM-based automatic data-processing system in web environment.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.395-398
• /
• 2011

This paper introduces stochastic cash-flow modeling integrated with simulation based scheduling. The system makes use of CPM schedule data exported from commercial scheduling software, computes the best fit probability distribution functions (PDFs) of historical activity durations, assigns the PDFs identified to respective activities, simulates the schedule network, computes the deterministic and stochastic project cash-flows, plots the corresponding cash flow diagrams, and estimates the best fit PDFs of overdraft and net profit of a project. It analyzes the effect of different distributions of activity durations on the distribution of overdrafts and net profits, and improves reliability compared to deterministic cash flow analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.303-312
• /
• 2009

Recently, requests for the accurate process planning using modeling and simulation technique are increasing in many engineering fields including shipbuilding industry. In this study, Combined DEVS(Discrete EVent System specification) and DTSS(Discrete Time System Specification) simulation kernel is developed, and an integration strategy of dynamics simulation module and graphics module is also implemented. To evaluate the efficiency and applicability of the simulation kernel and integration strategy, these are applied to the block erection simulation of offshore structures.