• 제목/요약/키워드: Integrated Receiver

검색결과 259건 처리시간 0.031초

3~5 GHz 광대역 저전력 Single-Ended IR-UWB CMOS 수신기 (A Low Power Single-End IR-UWB CMOS Receiver for 3~5 GHz Band Application)

  • 하민철;박병준;박영진;어윤성
    • 한국전자파학회논문지
    • /
    • 제20권7호
    • /
    • pp.657-663
    • /
    • 2009
  • 본 논문에서는 IR-UWB 통신에 적합한 저전력, 저복잡도의 CMOS RF 수신기를 제작하였다. 제안된 IR-UWB 수신기는 비교적 구조가 간단한 non-coherent demodulation 방식으로 설계, 제작되었다. 설계된 IR-UWB 수신기는 single-ended 2-stage LNA, S2D, envelop detector, VGA, comparator로 구성되어 있으며, 0.18 ${\mu}m$ CMOS 공정 기술을 이용하여 단일 칩으로 설계, 제작하였다. 측정 결과 data rate이 1 Mbps 일 때 BER값이 $10^{-3}$ 조건에서 sensitivity는 -80.8 dBm이다. 제작된 단일 칩 CMOS IR-UWB 수신기의 전류 소모는 전압이 1.8 V 일 때, 13 mA이며 23.4 nJ/bit 의 성능을 갖는다.

Design of a High Dynamic-Range RF ASIC for Anti-jamming GNSS Receiver

  • Kim, Heung-Su;Kim, Byeong-Gyun;Moon, Sung-Wook;Kim, Se-Hwan;Jung, Seung Hwan;Kim, Sang Gyun;Eo, Yun Seong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제4권3호
    • /
    • pp.115-122
    • /
    • 2015
  • Global Positioning System (GPS) is used in various fields such as communications systems, transportation systems, e-commerce, power plant systems, and up to various military weapons systems recently. However, GPS receiver is vulnerable to jamming signals as the GPS signals come from the satellites located at approximately 20,000 km above the earth. For this reason, various anti-jamming techniques have been developed for military application systems especially and it is also required for commercial application systems nowadays. In this paper, we proposed a dual-channel Global Navigation Satellite System (GNSS) RF ASIC for digital pre-correlation anti-jam technique. It not only covers all GNSS frequency bands, but is integrated low-gain/attenuation mode in low-noise amplifier (LNA) without influencing in/out matching and 14-bit analogdigital converter (ADC) to have a high dynamic range. With the aid of digital processing, jamming to signal ratio is improved to 77 dB from 42 dB with proposed receiver. RF ASIC for anti-jam is fabricated on a 0.18-μm complementary metal-oxide semiconductor (CMOS) technology and consumes 1.16 W with 2.1 V (low-dropout; LDO) power supply. And the performance is evaluated by a kind of test hardware using the designed RF ASIC.

태양열 집광기의 플럭스 밀도 분포 특성에 관한 연구 (An Experimental Study on the Characteristics of Flux Density Distributions produced by Solar Concentrating System)

  • 강명철;강용혁;윤환기;유창균
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.422-426
    • /
    • 2005
  • This experimental study represents the results of an analysis on the characteristics of flux density distribution in the focal region of solar concentrator. The characteristics of flux density distributions are investigated to optimally design and position a cavity receiver. This was deemed very useful to find and correct various errors associated with a dish concentrator. We estimated the flux density distribution on the target placed along with focal lengths from the dish vertex to experimentally determine the focal length. It is observed that the actual focal point exists when the focal length is 2.17m. The total integrated power and percent power was 2467W and $85.8\%$, respectively, in the case of small dish, and also 2095W and $79\%$, respectively, in the case of KIERDISH II. As a result of the percent power within radius, approximately $90\%$ of the incident radiation is intercepted by about 0.06 m radius. The minimum radius of receiver in KIERDISH II is found to be 0.15m and approximately $90\%$ of the incident radiation is intercepted by receiver aperture.

  • PDF

항공 계기착륙 디지털 송수신 모듈 설계 (Design of Digital Transmitter and Receiver Modules in ILS)

  • 최종호
    • 한국정보전자통신기술학회논문지
    • /
    • 제4권4호
    • /
    • pp.264-271
    • /
    • 2011
  • 항공기의 계기착륙을 유도하는 시스템인 ILS(Instrument Landing System)는 1947년 ICAO(International Civil Aviation Organization)에서 국제표준으로 채택되어 현재는 상용시스템으로 출시되고 있다. 본 논문에서는 통합형 ILS 디지털 송수신 모듈의 설계방법을 제안하였다. 새롭게 제안한 것은 FPGA를 이용한 디지털 이중 AM 변복조기, 샘플링 클럭 생성을 위한 DDS(Direct Digital Synthesizer), DDC(Digital Down converter) 구조의 복조기, DSP 칩을 이용한 AM 스펙트럼 분석기의 디지털 설계 기법이다. 제안한 설계 방법의 유용성을 모듈 개발 및 실험을 통해 확인한 결과, 성능이 우수한 상용 시스템으로의 활용이 가능함을 확인하였다.

SAW device를 이용한 900MHz 대역 수동형 RFID system의 인식거리 향상 연구 (Improve distance of Passive RFID system for 900MHz Using SAW device)

  • 박주용;김재권;김경환;여준호;범진욱
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.975-976
    • /
    • 2006
  • The passive type RFID (Radio Frequency Identification) System using Surface Acoustic Wave (SAW) tag at 900 MHz in the range of more than 1 m was fabricated. To improve interrogation range of the system propose a method to increase isolation between transmitter and receiver. This method using a direct conversion architecture achieves a leakage rejection of 10 dB increased compared with conventional system. Measured interrogation range is more than 1 m.

  • PDF

Micro-block Stacking 방법으로 제작한 집적형 Triplexer 제작 및 특성 측정 (Fabrication of the Integrated Triplexer Using Micro Block Stacking Method)

  • 윤현재;김진원
    • 한국광학회지
    • /
    • 제23권5호
    • /
    • pp.217-221
    • /
    • 2012
  • 본 논문에서는 정밀 세라믹 부품을 이용한 MBS(Micro-Block Stacking) 방법으로 1550 nm 파장의 아날로그 신호 수신과 1310nm/1490nm 파장의 디지털 신호 송, 수신이 가능한 8 pin mini DIL 형태의 집적형 Triplexer를 제작하였다. 제작된 전체 어셈블리는 $5.40mm{\times}2.15mm{\times}1.05mm$ 크기로 통신용 광모듈 국제 표준인 MSA(Multi Source Agreement) 규격의 SFP(Small Form Pluggable) 광모듈 제작이 가능하다. 자동 능동 광정렬 장비를 사용하여 제작된 집적형 Triplexer를 단일모드 광섬유에 광정렬하였을 때, 1310 nm 송신부 최대 광출력이 -14.5 dBm이었고, 송신부에 의하여 위치가 자동 정렬된 1550 nm와 1490 nm 수신부 수신감도는 각각 0.83 A/W, 0.73 A/W로 단거리 통신에 적용 가능한 값을 얻었다.

PLL없이 동작하는 S/PDIF IC 설계에 관한 연구 (Study on the Design of S/PDIF BC which Can Operate without PLL)

  • 박주성;김석찬;김경수
    • 한국음향학회지
    • /
    • 제24권1호
    • /
    • pp.11-20
    • /
    • 2005
  • 본 논문에서는 PLL (Phase Locked Loop)없이 동작할 수 있는 S/PDIF (Sony Philips Digital Interface) 수신기의 연구에 관하여 다룬다. 현재 대부분의 오디오 장치와 오디오 프로세서에서 S/PDIF 수신기가 사용되고 있음에도 불구하고, 국내에서는 이에 관한 연구가 많지 않은 실정이다. 현재 사용되고 있는 S/PDIF 수신용 상용 DAC(Digital-to-Analog Converters) 칩들은 모두 내부에 PLL 회로를 포함하고 있다. PLL 회로는 S/PDIF 디지틸 신호로부터 클럭 정보를 뽑아내고 클럭과 입력 신호간의 동기화를 맞추는 역할을 한다. 그러나, PLL 회로는 "아날로그 회로"라는 특성 때문에 VLSI (Very Large Scale Integrated Ciruits)회로의 SOCs (System On Chips)설계에 있어 많은 어려움을 야기한다. 본 논문에서는 PLL 회로 없이 순수 디지털 회로로만 구현된 S/PDIF 수신기를 제안하였다. 제안된 수신기의 핵심 아이디어는 16 MHz의 기본 클럭과 S/PDIF 신호의 속도비를 이용한다는 것이다. 본 논문에서는 수십만개의 S/PDIF 입력 신호에 대한 디코딩 확인 후, PLL같은 아날로그 회로 없이 순수 디지틸 회로만으로 S/PDIF 수신기를 설계할 수 있음을 확인하였다. 제안된 S/PDIF 수신기는 SOC 설계용 If로서 활용될 수 있을 것으로 본다.

중파 안테나의 GPS영향과 성능개선 구현 및 제안 (A Beacon antenna of GPS impact and performance improvement implementation the proposal)

  • 최용권;정진호;이상정
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2015년도 추계학술대회
    • /
    • pp.279-282
    • /
    • 2015
  • 해양수산발전 기본법 제 15조(해양안전관리 등)에 의거 해양안전 및 해양교통시설의 하나인 위성항법 보정서비스(DGPS) 전국망 구축에 따라 국가 인프라 활용도를 극대화하고 대국민 편익 개선을 위해 원천기술개발이 꾸준히 제기 되고 있다. 특히 해양용 중파수신기 공급제품 유형을 살펴보면 국제해사기구(IMO) 권고에 만족하는 성능 제품 대부분 안테나와 수신기가 분리되는 구조 공급되고 있고 일부 통합모델의 경우 매우 고가모델로 해양용 수신기 보다는 휴대가 쉬운(Portable) 측위용으로 일부 활용되고 있어 저렴한 통합모델 개발이 요구되고 있다. 현재 해양용 위성항법 보정정보 수신기 중 GPS모듈, 중파모듈 각각은 저가 개발이 가능하나 독립적 운용 환경에서 통합모델 개발 이루어지지 않아 어떠한 문제가 있는지 살펴보고, 285kHz~315kHz 중파(medium wave or Beacon)를 이용한 DGPS Beacon 수신기 구조에서 중파안테나와 GPS수신기가 중파대역 폭당 신호대 잡음비(SNR: Signal to Noise Ratio)가 GPS 수신기에 미치는 영향에 대해 중점 연구하였다. 본 연구는 중파와 GPS 통합과정에서 중파안테나 및 수신부와 GPS안테나와 수신부가 어떤 영향을 미치고 GPS 신호감쇄가 DGPS 성능에 미치는 특성을 GPS 제조사별로 살펴보았고 중파 정규화 신호대 잡음비가 GPS제조사별 미치는 영향과 중파신호 영향에 대해 GPS 대역 폭당 잡음 전력비 성능개선을 위한 제안을 하였다.

  • PDF

고기동 환경에 적용 가능한 소형 GPS/MEMS IMU 통합항법 수신모듈 설계 (Design of a Compact GPS/MEMS IMU Integrated Navigation Receiver Module for High Dynamic Environment)

  • 정구용;박대영;김성민;이종혁
    • 한국항행학회논문지
    • /
    • 제25권1호
    • /
    • pp.68-77
    • /
    • 2021
  • 본 논문에서는 높은 동특성 환경에서 동작이 가능한 GPS/MEMS IMU 통합항법 수신모듈을 설계 및 제작하고, 그 결과를 확인하였다. 설계한 모듈은 RF 수신부, 관성측정부, 신호처리부, 상관기, 항법 S/W로 구성된다. RF 수신부는 저잡음증폭, 주파수 변환, 필터링, 자동이득조절 기능을 수행하고, 관성측정부는 3축 자이로스코프, 가속도계, 지자기센서가 적용된 MEMS급 IMU로부터 측정 데이터를 수집하여 항법S/W로 전달하는 인터페이스를 제공한다. 신호처리부 및 상관기는 FPGA 로직으로 구현하여 필터링 및 상관 값 계산을 수행하고, FPGA 내부 CPU를 사용하여 위성항법, 통합항법 S/W를 구현하였다. 제작된 모듈의 크기는 95.0 × 85.0 × 12.5 mm 이고, 무게는 110g을 확인하였으며, 동적성능 1200m/s, 가속도 10g의 환경에서 규격 이내의 항법정확도 성능을 확인하였다.

Precision Assessment of Near Real Time Precise Orbit Determination for Low Earth Orbiter

  • Choi, Jong-Yeoun;Lee, Sang-Jeong
    • Journal of Astronomy and Space Sciences
    • /
    • 제28권1호
    • /
    • pp.55-62
    • /
    • 2011
  • The precise orbit determination (POD) of low earth orbiter (LEO) has complied with its required positioning accuracy by the double-differencing of observations between International GNSS Service (IGS) and LEO to eliminate the common clock error of the global positioning system (GPS) satellites and receiver. Using this method, we also have achieved the 1 m positioning accuracy of Korea Multi-Purpose Satellite (KOMPSAT)-2. However double-differencing POD has huge load of processing the global network of lots of ground stations because LEO turns around the Earth with rapid velocity. And both the centimeter accuracy and the near real time (NRT) processing have been needed in the LEO POD applications--atmospheric sounding or urgent image processing--as well as the surveying. An alternative to differential GPS for high accuracy NRT POD is precise point positioning (PPP) to use measurements from one satellite receiver only, to replace the broadcast navigation message with precise post processed values from IGS, and to have phase measurements of dual frequency GPS receiver. PPP can obtain positioning accuracy comparable to that of differential positioning. KOMPSAT-5 has a precise dual frequency GPS flight receiver (integrated GPS and occultation receiver, IGOR) to satisfy the accuracy requirements of 20 cm positioning accuracy for highly precise synthetic aperture radar image processing and to collect GPS radio occultation measurements for atmospheric sounding. In this paper we obtained about 3-5 cm positioning accuracies using the real GPS data of the Gravity Recover and Climate Experiment (GRACE) satellites loaded the Blackjack receiver, a predecessor of IGOR. And it is important to reduce the latency of orbit determination processing in the NRT POD. This latency is determined as the volume of GPS measurements. Thus changing the sampling intervals, we show their latency to able to reduce without the precision degradation as the assessment of their precision.