• 여성건강간호학회지
• /
• 제17권1호
• /
• pp.10-20
• /
• 2011

Purpose: The purpose of this study was to examine the effects of integrated menopause management program derived theoretical framework of King (1981)'s goal attainment theory model for middle aged women. Methods: This research was a nonequivalent control group non-synchronized design. The subjects of this study were 37 middle aged women in Busan and experiencing menopause; 17 for the experimental group and 20 for the control group. Experimental group was educated for 1 hour group interchange activity and five minutes individual interchange activity, once a week during 8 weeks. Measurement for comparison were taken two times, at baseline, 8wks. The effects were evaluated with menopause symptom, menopause knowledge, menopause attitude and menopause management. Results: The experimental group was significantly lower than control group on menopause symptom (F=5.936, p=.010) and higher than control group on menopause knowledge (F=12.031, p=.001) and menopause management (F=5.861, p=.010) after integrated menopause management program. However integrated menopause management program did not make significant differences on menopause attitude (F=0.105, p=.374). Conclusion: Results indicate that integrated menopause management program could be an effective intervention decreasing menopause symptom and for increasing menopause knowledge, menopause management in middle aged women.

• 한국실천공학교육학회논문지
• /
• 제2권1호
• /
• pp.106-114
• /
• 2010

직업능력개발기관은 기관의 성격, 교육훈련과정 및 교육훈련방법 등이 다양해서 그 동안 효율적인 원가관리모형을 사용한 원가계산을 수행하지 못하였다. 본 논문은 이러한 필요성을 해소하기 위하여 새로운 원가관리기법인 개별원가계산, 활동원가계산 및 표준원가계산을 사용하여 직업능력개발기관의 통합된 원가관리모형을 구성하고, 이를 적용가능모형과 이상적인 모형의 두 단계로 구분하여 단계적으로 확장할 수 있도록 하였다. 통합모형에는 원가 계산방법뿐만 아니라 원가항목과 간접원가 배부기준 그리고 공헌이익에 의한 원가분석방법이 포함되어 있어서, 직업능력개발기관이 현장에서 원가정보를 쉽게 산출하고 분석할 수 있도록 구성하였다. 제시된 원가관리 통합모형이 성과관리와 연계되어 있지 않다는 한계점이 있지만, 현재 보유하고 있는 자료를 조금 더 세분화하고 일관되게 모형을 적용하면 보다 분석가치가 있는 원가정보를 산출할 수 있을 것으로 사료된다. 또한 향후 표준원가를 활용한 원가계산방법으로 발전해 나감으로써 성과평가와 연계되는 고리를 마련할 수 있을 것이다.

• 산업공학
• /
• 제24권1호
• /
• pp.1-7
• /
• 2011

The purpose of this research was to develop an integrated interface for the usability test of systems or products in the design process. It is capable of automatically creating GOMS models which can predict human task performances. It can generate GOMS models to be interacted with the prototype interfaces. It can also effectively manage various design information and various usability test results to be implemented into the new product and/or system design. Thus we can perform usability test for products or system prototypes more effectively and also reduce time and effort required for this test. For usability tests, we established an integrated interface based on GOMS model by the LabVIEW program. We constructed the system that the linkage to GOMS model is available. Using this integrated interface, the menu structure of mobile phone can be constructed easily. User can design a depth and a breath that he want. The size of button and the label of the button is changable. The path to the goal can be defined by the user. Using a designed menu structure, the experiment could be performed. The results of GOMS model and the actual time are presented. Besides, values of operators of GOMS model can be defined as the value that user wants. Using the integrated interface that we developed, the optimal menu structure deducted. The menu structure that user wants can be established easily. The optimal layout and button size can be decided by comparison of numerous menu structures. User can choose the method of usability test among GOMS model and empirical data. Using this integrated interface, the time and costs can be saved and the optimal menu structure can be found easily.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.381-389
• /
• 2012

In the existing naval combat system, integrated management is done based on subsystems that make up the system. The naval combat system, however, is a large-scale distributed system made up of subsystems of diverse heterogeneous environments. Although each of the subsystems can be easily managed because they are on the same platform, it is extremely difficult to integrate and manage as a single entity all subsystems that make up the naval combat system because the heterogeneous environments and distributed systems have to be taken into account. In fact, there hasn't been a technique available to integrate and manage subsystems that make up the naval combat system, until now. In this paper, the architecture of an integrated management system is designed and implemented to provide the user with various services. Furthermore, a system that can manage subsystems of the naval combat system in an integrated way is developed.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 추계학술대회
• /
• pp.165-172
• /
• 2009

Integrated management model (SNMP/SMI) for lubiquitous egacy remote communication network or service make possible combination of various architecture. However, legacy management system cannot be applied some problems such as inefficient, complexly, implement and large network by reason of integration of voice and data, wired and wireless, and service area between service provider. For improve this, supplied JMX(Java Management eXtensions) on network management technology from SUN. JMX is integrated architecture for existing network management and monitoring. In this paper, we design and implement for integrated network management through multi-protocol agent using JMX.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.289-307
• /
• 2009

This study presented a model of enterprise that operates an integrated system, and studied about an integrated element of ISO 9001:2000 and ISO 14001:2004 standard. In addition to this, it grasped what the obstacle elements are in use of an integrated system, and analyzed the effect in use of an integrated system through the survey on 58 enterprises that operate an integrated system, From the result of this study, we have known that the obstacle elements in operation of an integrated system are in lack of understanding of process, in lack of execution ability of system, in unfamiliarity of system and lack of willingness of the executives.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1339-1346
• /
• 2011

This paper is developed to demand management scenario of energy consumption efficiency improvement, electricity generation efficiency improvement, network efficiency improvement, change of distribution ratio, movement of energy source, change of heating system, put of CHP to quantitatively assess to impact on energy use of demand management at the national level. This scenario can be applied Energy System Management model was developed based on Energy Balance Flow. In addition, effect analysis through built demand management scenario was quantitatively evaluated integrated demand management effectiveness of energy cost saving, CO2 emission reduction and energy savings of national level by calculating to primary energy source usage change in terms of integration demand management effect more often than not a single energy source separated electricity, heat and gas.

• 품질경영학회지
• /
• 제16권1호
• /
• pp.78-87
• /
• 1988

The purpose of this study is to develop the algorithm applicable to the integrated production inventory model under quantity discount. To achieve this purpose, the integrated production inventory model which unifies the inventory problem of raw materials and the finished product for a single product manufacturing system is considered. The product is manufactured in batches and the raw materials are obtained from outside suppliers but some of the raw materials are discounted according to the purchasing quantity. The intergrated production inventory problem considered in this study is formulated by the non-linear mixed integer programming model, and the optimal solution is obtained by using the algorithm developed by Goyal. Then, the algorithm developed by this study is applied to the quantity discount problem, and the optimal solution is revised by this results. The quantity discount algorithm of the integrated production inventory model developed by this study gives a systematic procedure to obtain the optimum policy to minimize the total cost in any case. The numerical example involving 20 raw materials and 5 raw materials among them are discounted according to the purchasing quantity is given to verify the mathematical model and the algorithm developed in this study.

• 환경영향평가
• /
• 제10권3호
• /
• pp.235-243
• /
• 2001

Since the middle of 1990s, in Korea a few researches on the optimal management technologies combining numerical model and GIS for the management of water environment in drinking watershed area and reservoir such as Paldang Lake have been carried out. In this study, the integrated water environment management system was been suggested to efficiently reflect the public awareness of the environment by integrating the web based distributed data collection system, GIS, public hearing system and water quality model. As all the components of the system have been developed using the World Wide Web and all data have been collected from the relevant agencies through the Internet, the water quality model could be implemented on the web directly. In consequence, the environmental geographic information in Paldang Lake could be acquired and analyzed through the Internet. The system can rapidly respond to the public right to know on environment, so the public will willingly participate in the governmental projects on environment. To verify the usability of the developed system, it has been applied to Paldang Lake. Especially when the web based model has been used, users can easily and confidentially get the prediction results by applying the minimum number of parameters for the water quality model. This model will provide clearness and scientific bases in the process of water quality prediction for the sensitive sites where there are critical conflicts between the residents and the developers. In this study, rapid water environment management technique without spatial and time limit has been suggested, which can contribute to the efforts on the government and the public participation.

• 청정기술
• /
• 제28권2호
• /
• pp.138-146
• /
• 2022

Electricity has become a factor that dramatically affects the market economy. The day-ahead system marginal price determines electricity prices, and system marginal price forecasting is critical in maintaining energy management systems. There have been several studies using mathematics and machine learning models to forecast the system marginal price, but few studies have been conducted to develop, compare, and analyze various machine learning and deep learning models based on a data-driven framework. Therefore, in this study, different machine learning algorithms (i.e., autoregressive-based models such as the autoregressive integrated moving average model) and deep learning networks (i.e., recurrent neural network-based models such as the long short-term memory and gated recurrent unit model) are considered and integrated evaluation metrics including a forecasting test and information criteria are proposed to discern the optimal forecasting model. A case study of South Korea using long-term time-series system marginal price data from 2016 to 2021 was applied to the developed framework. The results of the study indicate that the autoregressive integrated moving average model (R-squared score: 0.97) and the gated recurrent unit model (R-squared score: 0.94) are appropriate for system marginal price forecasting. This study is expected to contribute significantly to energy management systems and the suggested framework can be explicitly applied for renewable energy networks.