• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.807-830
• /
• 2015

When a building structure requires both health monitoring system and vibration control system, integrating the two systems together will be cost-effective and beneficial for creating a smart building structure with its own sensors (nervous system), processors (brain system), and actuators (muscular system). This paper presents a real-time integrated procedure to demonstrate how health monitoring and vibration control can be integrated in real time to accurately identify time-varying structural parameters and unknown excitations on one hand, and to optimally mitigate excessive vibration of the building structure on the other hand. The basic equations for the identification of time-varying structural parameters and unknown excitations of a semi-active damper-controlled building structure are first presented. The basic equations for semi-active vibration control of the building structure with time-varying structural parameters and unknown excitations are then put forward. The numerical algorithm is finally followed to show how the identification and the control can be performed simultaneously. The results from the numerical investigation of an example building demonstrate that the proposed method is feasible and accurate.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1844-1854
• /
• 2018

Isolated power systems (IPS) are often characterized by a weak grid due to small power grids. The grid side voltage is no longer equivalent to an ideal voltage source of an infinitely big power grid. The conversion control of new energy sources, parameter perturbations as well as the load itself can easily cause the system voltage to oscillate or to become unstable. To solve this problem, increasing the energy-storage power sources is usually used to improve the reliability of a system. In order to provide support for the voltage, the energy-storage power source inverter needs an method to control the voltage source. Therefore, this paper has proposed the active damping control of a voltage source inverter (VSI) based on virtual compensation. By simplifying the VSI double closed-loop control, two feedback compensation channels have been constructed to reduce the VSI output impedance without changing the characteristics of the voltage gain of a system. This improvement allows systems to operate stably in a larger range. A frequency-domain analysis, and simulation and experimental results demonstrate the feasibility and effectiveness of the proposed method.

• Journal of Environmental Policy
• /
• v.8 no.4
• /
• pp.149-169
• /
• 2009

Integrated Pollution Prevention and Control(IPPC) has become an idealistic environmental prevention concept in developed countries and corresponds with principles of Industrial Ecology. The concept of emissions regulatory integration is a key factor for an integrated environmental management system. While most EU member countries have a cross-media regulatory system, Korea has a media-specific regulatory system which was found to have significant environmental management problems. The purpose of this study is to integrate the emissions regulatory system by resolving difficulties through procedural, organizational, and substantive analysis of integration. To this end, the following research was performed: The first task was to determine the target of the integrated emissions regulatory system. In connection with this, the "IPPC directive" of the EU and the "PPCA 2000" schedule 1 of the UK, as well as environmental laws in Korea were compared and analyzed. The second was to design a regulatory system model. This model was divided into three groups after considerations were made regarding the time it would take for the pre-application,application, and permission stages. Lastly, on the basis of this research, a revised bill for an integrated emissions regulatory system was suggested. Nevertheless, substantive analysis of integration focused on BAT requires supplementation in order to make the integrated emissions regulation system operate normally as an environmental management policy and regulation method. To this end, the specific characteristics of Korean society, culture, and law should be actively considered.

• International journal of advanced smart convergence
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2017

Recently, the development of the information communication industry has made many changes in the industrial acoustic industry. Especially, it has a great influence on the change of system and equipment of acoustic system. Analog equipment is changing to digital equipment, and integrated control equipment makes it easier to operate and manage the sound system. However, the integrated control system currently on the market is only controllable for some devices. In this paper, we propose a new AoIP - based system configuration method, which enables the operation status monitoring, unmanned operation and self - diagnosis of equipment. As a result of the study, it is confirmed that the proposed system can be operated, monitored, and self - diagnosed at remote sites. It is expected that an AoIP- based sound system will be the industry standard in the future.

• Convergence Security Journal
• /
• v.7 no.4
• /
• pp.1-8
• /
• 2007

Currently, the needs of open standard and integrated network, and also applications of Ethernet network based system are increasing. By applying and expanding TCP/IP based network technology from high to low control level, factory automation application has been implemented, and thus integrated factory automation system has been accomplished, which is directly interoperable between high level management program and DB system. This paper proposes a communication control device which is based on Ethernet/IP standard system for factory automation. The proposed system is workable in the environment of a network system, which is based on CIP standard interface technology. The proposed system can also contribute to improve data communication characteristics.

• Journal of Korean Society for Quality Management
• /
• v.32 no.3
• /
• pp.81-93
• /
• 2004

There is no doubt that BSC(Balanced Scorecard), ABC(Activity-Based Costing System), EVA(Economic Value Added System) draw sensation in the world as the tools of Performance Evaluation System and Quality Control. They are useful tools that can help succeed in the dynamic and competitive business environment. These three tools are discussed respectably. However, it also brings doubt whether it is possible to integrate the three tools made in the similar time and which way is appropriate among the three tools according to the type and the circumstance of business. In fact, these tools are not the opposing relations but the complementary relations. Consequently, this paper explains the relations of the three methods and suggests the process of the integrated models. Besides, it provides an idea about when Performance Evaluation System and Quality Control are needed for companies under different aspects considering the circumstance used the respective methods individually.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.126.4-126
• /
• 2001

Recently, researches on CIM in product lines of industrial plant are widely progressed, automation of working environment with modernization of product equipments is realized and also, installation of integrated control system based on computer is activated. Since the CIM system is basically developed by using computer, there are several complicated problems such as design problem of hardware interface between computer and many product machines with individual special functions, software development problem with realtime data process and multi communication functions for realtime data monitoring and control of product machines This paper shows the development results for a single board type of microcontroller and a monitoring software based on realtime processing database system ...

• International Journal of Control, Automation, and Systems
• /
• v.6 no.3
• /
• pp.460-466
• /
• 2008

This paper deals with the stability analysis of a missile guidance loop employing an integrated proportional navigation guidance law. The missile guidance loop is formulated as a closed-loop control system consisting of a linear time-invariant feed-forward block and a time-varying feedback gain. Based on the circle criterion, we have defined the concept of absolute stability margins and obtained the gain and phase margins for the system assuming 1 st order missile/autopilot dynamics. The correlation between the absolute stability margins and the margins derived from the frozen system analysis is also discussed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.1
• /
• pp.67-73
• /
• 2010

Finding sufficient supplies of clean energy for future is one of the society's most important challenges according to technologies. Alternative renewable energy source such as sun energy can be substituted for exceeding human energy need. The main factor affect to solar performance is a collective intensity. To enhance intensity, suitable equipment is a solar tracker. This paper presents design and evaluation of 1 layer polar motion control system for solar tracker suitable for building integrated system. To evaluation of tracking accuracy and adaptability, solar tracker with 64 links is implemented. In experimental results, the accuracy of tracking has under ${\pm}0.0287^{\circ}$ and the thickness has under 140mm.

• Journal of the Korean Institute of Gas
• /
• v.14 no.2
• /
• pp.40-46
• /
• 2010

In this study, the integrated control and safety management system for a super-large LNG membrane storage tank has been presented based on the investigation and analysis of measuring equipments and safety analysis system for a conventional LNG membrane storage tank. The integrated control and safety management system, which may increase a safety and efficiency of a super-large LNG membrane storage tank, added additional pressure gauges and new displacement/force sensors at the steel anchor between an inner tank and a prestressed concrete structure. The displacement and force sensors may provide clues of a membrane panel failure and a LNG leakage from the inner tank. The conventional leak sensor may not provide proper information on the membrane panel fracture even though LNG is leaked until the leak detector, which is placed at the insulation area behind an inner tank, send a warning signal. Thus, the new integrated control and safety management system is to collect and analyze the temperature, pressure, displacement, force and LNG density, which are related to the tank system safety and leakage control from the inner tank. The digital data are also measured from measurement systems such as displacement and force of a membrane panel safety, LNG level and density, cool-down process, leakage, and pressure controls.