• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.802-805
• /
• 2007

A hardware architecture is presented of a wavelet based multiple line addressing driving scheme for passive matrix displays using the FPGA (Field Programmable Gate Arrays), which will be integrated in the scalable video coding $architecture^{[1]}$. The incoming compressed video data stream will then directly be transformed to the required column voltages by the hardware architecture without the need of employing the video decompression.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.222-231
• /
• 2017

In this paper, a new architecture for a cost-effective power conditioning systems (PCS) using a single-sourced asymmetric cascaded H-bridge multilevel inverter (MLI) for photovoltaic (PV) applications is proposed. The asymmetric MLI topology has a reduced number of parts compared to the symmetrical type for the same number of voltage level. However, the modulation index threshold related to the drop in the number of levels of the inverter output is higher than that of the symmetrical MLI. This problem results in a modulation index limitation which is relatively higher than that of the symmetrical MLI. Hence, an extra voltage pre-regulator becomes a necessary component in the PCS under a wide operating bias variation. In addition to pre-stage voltage regulation for the constant MLI dc-links, another auxiliary pre-regulator should provide isolation and voltage balance among the multiple H-bridge cells in the asymmetrical MLI as well as the symmetrical ones. The proposed PCS uses a single-ended DC-DC converter topology with a coupled inductor and charge-pump circuit to satisfy all of the aforementioned requirements. Since the proposed integrated-type voltage pre-regulator circuit uses only a single MOSFET switch and a single magnetic component, the size and cost of the PCS is an optimal trade-off. In addition, the voltage balance between the separate H-bridge cells is automatically maintained by the number of turns in the coupled inductor transformer regardless of the duty cycle, which eliminates the need for an extra voltage regulator for the auxiliary H-bridge in MLIs. The voltage balance is also maintained under the discontinuous conduction mode (DCM). Thus, the PCS is also operational during light load conditions. The proposed architecture can apply the module-integrated converter (MIC) concept to perform distributed MPPT. The proposed architecture is analyzed and verified for a 7-level asymmetric MLI, using simulation results and a hardware implementation.

• 산업경영시스템학회지
• /
• 제38권3호
• /
• pp.100-107
• /
• 2015

Recently as the manufacturers want competitiveness in dynamically changing environment, they are trying a lot of efforts to be efficient with their production systems, which may be achieved by diminishing unplanned operation stops. The operation stops and maintenance cost are known to be significantly decreased by adopting proper maintenance strategy. Therefore, the manufacturers were more getting interested in scheduling of exact maintenance scheduling to keep smooth operation and prevent unexpected stops. In this paper, we proposedan integrated maintenance approach in injection molding manufacturing line. It consists of predictive and preventive maintenance approach. The predictive maintenance uses the statistical process control technique with the real-time data and the preventive maintenance is based on the checking period of machine components or equipment. For the predictive maintenance approach, firstly, we identified components or equipment that are required maintenance, and then machine parameters that are related with the identified components or equipment. Second, we performed regression analysis to select the machine parameters that affect the quality of the manufactured products and are significant to the quality of the products. By this analysis, we can exclude the insignificant parameters from monitoring parameters and focus on the significant parameters. Third, we developed the statistical prediction models for the selected machine parameters. Current models include regression, exponential smoothing and so on. We used these models to decide abnormal patternand to schedule maintenance. Finally, for other components or equipment which is not covered by predictive approach, we adoptedpreventive maintenance approach. To show feasibility we developed an integrated maintenance support system in LabView Watchdog Agent and SQL Server environment and validated our proposed methodology with experimental data.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제13권1호
• /
• pp.59-73
• /
• 2007

정보가전제어를 위해 Havi, Jini, LonWorks, UPnP, SLP 등 여러 미들웨어들이 현존하고 있음에도 불구하고, 홈네트워크가 계속 진화함에 따라 다양한 정보가전들에 대해 특화된 새로운 미들웨어들이 계속해서 등장할 것으로 예상된다. 본 논문은 홈네트워크 상에서 이질적인 미들웨어간의 상호 연동을 위한 통합 구조 방식에 대해 고찰하고, 효율적인 홈오토메이션을 위하여 기존 방식과는 달리 이질적인 미들웨어를 통합하는 시나리오 기반의 사용자 중심 통합 구조를 제안하고 구현한다. 본 논문에서 제안한 HOMI 구조(HOmenetwork Middleware for Interoperability)는 사용자가 서비스 연동 시나리오를 스크립트 방식의 인터프리터 언어인 HOMIL(HOMI Language)를 이용하여 직접 작성하고 변경할 수 있는 인터페이스를 제공한다. HOMI는 이러한 인터페이스를 통하여 기존의 통합 미들웨어 구조와는 다르게 사용자들이 직접 시나리오를 작성하고 구성함으로써 홈오토메이션을 위한 이기종 가전들간 연동의 효율성과 편리성을 향상시켰다. HOMI는 연동 서비스를 시간 문맥, 동기 문맥, 비동기 문맥 등 3가지로 분류하고, 특정 이벤트가 발생하였을 때 문맥을 고려하여 다음 서비스가 수행되도록 지원한다. HOMI는 변경된 시나리오가 댁내의 홈네트워크 환경에 즉각적으로 반영될 수 있도록 함으로써 사용자들이 새로운 시나리오 적용을 위해 새로운 응용을 설치하거나 서버를 갱신하고 재부팅하는 과정 없이 계속적으로 서비스들을 받을 수 있도록 지원한다. 마지막으로 HOMI는 통합 미들웨어를 위한 중앙 집중형 구조에서 발생하는 부하 문제를 Agent들을 여러 장치에 분산할 수 있도록 함으로써 해결하였다.

• KIEAE Journal
• /
• 제16권5호
• /
• pp.21-28
• /
• 2016

Purpose: The Objective of this study is to explore the capabilities of an integrated modelling and simulation workflow when applied to an experiment-based research process, aimed at deriving daylight optimization strategies specific to tall buildings. Methods: Two methods were devised to apply this workflow with the help of DIVA and Rhino/Grasshopper. The first method is a multiple variant analysis by setting up an appropriate base case and analysing its daylight and energy performance, forming the basis of comparison for subsequent cases for design variants. The second method involved setting up the base case within a site context and conducting a solar irradiation study. An architectural variables such as overhang and shading device, were then defined as inputs in the parametric definition in Grasshopper to control the selected variable. Results: While the first method took advantage of the speed and efficiency of the integrated workflow, the second method was derived based on the ability to directly process simulation data within the integrated, single-software platform of the proposed workflow. Through these methods, different architectural strategies were explored, both to increase daylight penetration and to reduce radiant heat gain. The focus is on methods by which this workflow can be applied to facilitate the experimental derivation of daylight optimization strategies that are specific to tall building design.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제18권2호
• /
• pp.65-76
• /
• 2012

South Korea's rapid ageing and the fast increase of nuclear families have led to the social isolation of the elderly and generational conflicts. In order to solve these social problems, this study explores the ways in which different generations can communicate and interact more actively. We surveyed 110 social workers who run generation-integrated programs at community centers in Gyeonggi province, and also examined the spatial design of the four age-integrated community centers and analysed its effect on the intergenerational exchange. We propose several suggestions for intergenerational exchange programs and effective space planning to facilitate intergenerational interactions in multi-generational community centers. To develop intergenerational interactions and keep their constant relationship, the users of community centers should be the core of generation-integrated programs which can facilitate the intergenerational exchange and interactions.

• Journal of Construction Engineering and Project Management
• /
• 제7권3호
• /
• pp.1-14
• /
• 2017

Delay claim should actually be supported by a set of proper information so that the contractors could prove their validity. The so-called information should be able to clarify the relationship between delay events and how they impact on the whole project. Therefore, exploiting an integrated system by people who are involved in construction business would certainly prove helpful. In the present study, delay analysis methods have been investigated along with selecting a relatively comprehensive method which has been modified, and eventually, a novel model and its required modules have been proposed for evaluating delay claims. The suggested integrated model is formed to identify delayed events, to classify delays, to measure the impacts of delays on the project scheduling, and finally to estimate the damages which were caused by those so-called delays. A decision support system (DSS) model which is related to the integrated system is actually extracted from Iran's general contract conditions, that is, 4311 magazine (equivalent to red FIDIC book). It is then programmed and coded by C# program. This DSS model can be used as an input of Easy Plan program. In addition, at the end of this research, the coded DSS has been used along with the so-called program so that a modified and developed model could be generated.

• 한국공간구조학회논문집
• /
• 제19권2호
• /
• pp.43-50
• /
• 2019

A smart connective control system was invented recently for coupling control of adjacent buildings. Previous studies on this topic focused on development of control algorithm for the smart connective control system and design method of control device. Usually, a smart control devices are applied to building structures after structural design. However, because structural characteristics of building structure with control devices changes, a iterative design is required for optimal design. To defeat this problem, an integrated optimal design method for a smart connective control system and connected buildings was proposed. For this purpose, an artificial seismic load was generated for control performance evaluation of the smart coupling control system. 20-story and 12-story adjacent buildings were used as example structures and an MR (magnetorheological) damper was used as a smart control device to connect adjacent two buildings. NSGA-II was used for multi-objective integrated optimization of structure-smart control device. Numerical simulation results show the integrated optimal design method proposed in this study can provide various optimal designs for smart connective control system and connected buildings presenting good control performance.

• 한국조경학회지
• /
• 제37권2호
• /
• pp.14-25
• /
• 2009

지식 패러다임의 변화와 함께 우리는 혼합의 시대에 살고 있다. 현대 조경에서 다루는 새로운 대상지들은 혼합의 양상을 실천하는 장이 되고 있으며, 조경 영역의 변화를 이끄는 주요 동인이 되고 있기도 하다. 이러한 배경 아래 본 연구는 환경설계에 있어 관련 분야 통합의 양상이 어떻게 나타나는지를 살펴보았다. 이를 위해 먼저 조경 인접 분야에서의 통합 논의의 경향을 계획 이론, 도시 이론, 건축 분야, 공공 환경 분야, 엔지니어링 분야 그리고 조경 이론으로 나누어 살펴보았다. 실천으로 나타나고 있는 분야별 통합의 논의 경향은 아직까지 각 분야를 중심으로 인접 분야의 장점을 효과적으로 활용하고자 하는 방향에서 진행되고 있다. 실천 사례로 볼 때, 통합적 설계의 접근 경향은 크게 설계 대상, 개별 전문 분야, 접근 방식 및 설계 방법론의 세가지 차원에서 발견할 수 있다. 설계의 대상 측면에서는 주로 설계를 통해 형성되는 각 물리적 대상간의 통합 또는 결합의 모습을 주로 볼 수 있다. 대부분의 통합 사례가 여기에서 발견되며, 거의 모두 소재나 표현의 대상이 몇 가지의 방법으로 통합되는 모습이다. 전문 분야의 측면에서는 각 개별 주체들이 설계 시 어떻게 활동하는지가 주로 나타난다. 여기에서는 개별 분야의 장점이 시너지를 이루면서 최적의 결과를 향해 통합되는 양상을 보인다. 접근 방식 및 설계 방법론의 측면에서는 효과적인 의사결정의 방법으로서 통합적 접근이 시도되고 있는데, 이때에는 개별 이해 당사자들의 통합이 주가 된다. 통합 설계는 아직까지 실천적 사례를 통해 구체적인 디자인 방법론으로 강조되는 경우는 많지 않았다. 그러나 통합설계의 필요성과 이론적 접근이 다방면에서 확인되었고, 랜드스케이프 어바니즘과 같은 실천적 움직임이 태동하여 활동하고 있다는 점은 고무적이라고 하겠다. 이러한 종합적 접근을 바탕으로 통합의 실천이 환경설계의 측면에서 논의되어야 할 시점이다.

• 대한조선학회논문집
• /
• 제47권2호
• /
• pp.265-277
• /
• 2010

In this study, an offshore process FEED(Front End Engineering Design) method is systematically established to perform integrated process engineering for topsides systems of LNG FPSO(Floating, Production, Storage, and Off-loading unit) based on the concepts and procedures for the process FEED of general offshore production plants. First, various activities of the general process FEED engineering are summarized, and then the offshore process FEED method, which is suitable for application to all types of offshore oil and gas production plants, is proposed. Second, an integrated process engineering environment is built based on the proposed FEED method. Finally, the integrated process engineering environment is applied to topsides systems of an LNG FPSO in order to verify the validity and applicability of the proposed FEED method. As a result, it is shown that the proposed FEED method can be applied to the process FEED engineering of FPSOs and moreover will be able to contribute to perform successful offshore projects in the future.