• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.109-112
• /
• 2015

We present [$Fe\;{\small{II}}$] ${\lambda}1.257{\mu}m$ spectra toward the interacting binary UY Aur with 0".14 angular resolution, obtained with the Near infrared Integral Field Spectrograph (NIFS) combined with the adaptive optics system Altair of the GEMINI observatory. In the [$Fe\;{\small{II}}$] emission, UY Aur A (primary) is brighter than UY Aur B (secondary). The blueshifted and redshifted emission between the primary and secondary show a complicated structure. The radial velocities of the [$Fe\;{\small{II}}$] emission features are similar for UY Aur A and B: ${\sim}-100km\;s^{-1}$ and ${\sim}+130km\;s^{-1}$ for the blueshifted and redshifted components, respectively. Considering the morphologies of the [$Fe\;{\small{II}}$] emissions and bipolar outflow context, we concluded that UY Aur A drives fast and widely opening outflows with an opening angle of ${\sim}90^{\circ}$ while UY Aur B has micro collimated jets.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.951-960
• /
• 1997

Package crack caused by the soldering process in the surface mounting plastic package is evaluated by applying the maximum energy release rate criterion. It could be shown that the crack propagation from the lower edge of the ie pad is easily occurred at the maximum temperature during the soldering process, where the pressure acting on the crack surface is assumed by the saturated vapor pressure at maximum temperature. The package crack formation depends on various parameters such as chip size, relative thickness, material properties, the moisture content and soldering temperature etc. The quantitative measure of the effects of the parameters could be easily obtained by using the taguchi's method which requires only a few kinds of combinations with such parameters. From the results, it could be obtained that the more significant parameters to effect the package reliability are the orders of Young's modulus, die pad size, down set, chip thickness and maximum soldering temperature.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.49-58
• /
• 2021

Globalization of higher education deepens the competition in the global educational services market. Competition between higher education institutions is based on the use of a wide range of activities and tools that are constantly evolving and becoming more complex. Digitalization significantly transforms the approaches to competition between universities in educational, research and marketing activities. Digital technologies are becoming an integral part of this competition. In addition, in the current conditions of globalization of the scientific and educational space, numerous rankings of universities have become an important tool of the competition; the most significant rankings of universities are as follows: Academic Ranking of World Universities (China), Times Higher Education Rankings of Universities (Great Britain), Webometrics (Spain). In the article, the key principles of the formation of world rankings of universities are analyzed, the main sources of information resources for their compilation are determined. The authors have concluded that the improvement of the position of educational institutions in the world rankings of universities should be implemented within the framework of the state educational policy. The key positive effects of universities due to increasing the competitiveness level of the national higher education system are specified.

• International Journal of Computer Science & Network Security
• /
• v.22 no.11
• /
• pp.272-278
• /
• 2022

The article proves the idea that the protection and development of Ukraine as an independent, sovereign state requires the education of a patriot citizen who is able to live and work in a democracy, ensure the unity of Ukraine, feel constant responsibility for himself, his people, the country, and strive to make a real contribution to reform processes, especially in unstable, wartime. The main goal of educational institutions in the system of educational work of the modern information space is revealed. The tasks of patriotic education of the individual are presented. The content of patriotic education at the wartime stage and the main characteristics of the content of patriotism are substantiated. The main methodological positions that are taken into account in the construction of the structure and dynamics of the formation of civil responsibility of the individual are highlighted. The structure of civic responsibility as an integral system of the modern information space is drawn, which includes three subsystems that characterize the natural, social and systemic qualities of citizenship, interconnected hierarchically and synergistically. The components of the structural part of the model of civil culture of the individual in the modern information space are analyzed.Modern modernization of the education system in the modern information space, which has led to the emergence of a new type of Educational Institutions, requires the search for new pedagogical technologies that can ensure the formation of a patriotic citizen with an active civic position, which involves not only mastering students' knowledge about the rights and obligations of citizens, convincing them of the expediency of democratic transformations of society, the formation of high moral and strong-willed, patriotic qualities and feelings, but also identifying motivated civic actions, actions that are necessary during martial law in Ukraine.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1756-1763
• /
• 2020

The paper studies spark plasma sintering (SPS) of industrially used UO₂-based fuel containing integral fuel burnable absorber (IFBA) of neutrons Gd₂O₃. Densification dynamics of pristine UO₂ powder and the one added with 2 and 8 wt% of Gd₂O₃ under ultrasonication in liquid has been studied under SPS conditions at 1050, 1250, and 1450 ℃. Effect of sintering temperature on phase composition as well as on O/U stoichiometry has been investigated for UO₂ SPS ceramics. Sintering of uranium dioxide added with Gd₂O₃ yields solid solution (U,Gd)O₂, which is isostructural to UO₂. SEM with EDX and metallography were implemented to analyze the microstructure of the obtained UO₂ ceramics and composite UO₂-Gd₂O₃ one, particularly, open porosity, defects, and Gd₂O₃ distribution were studied. Microhardness, compressive strength and density were shown to reduce after addition of Gd₂O₃. Obtained results prove the hypothesis on formation of stable pores in the system of UO₂-Gd₂O₃ due to Kirkendall effect that reduces sintering efficiency. The paper expands fundamental knowledge on pros and cons of fuel fabrication with IFBA using SPS technology.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.418-424
• /
• 2014

The improved thermal stability and anti-oxidation properties of Lyocell fiber were studied based on flame retardant treatment by using NaCl/$H_3PO_4$ solution. The optimized conditions of flame retardant treatment were studied on various maxing ratio of NaCl and $H_3PO_4$ and the mechanism was proposed through experimental results of thermal stability anti-oxidation. The IPDT (integral procedural decomposition temperature), LOI (limited oxygen index) and $E_a$ (activation energy) increased 23, 30 and 24% respectively via flame retardant treatment. It is noted that thermal stability and anti-oxidation improved based on char and carbon layer formation by dehydrogenation and dissociation of C-C bond resulting the hindrance of oxygen and heat energy into polymer resin. The optimized conditions for efficient flame retardant property of Lyocell fiber were provided using NaCl/$H_3PO_4$ solution and the mechanism was also studied based on experimental results such as IDT (initial decomposition temperature), IPDT, LOI and $E_a$.

• Polymer(Korea)
• /
• v.30 no.5
• /
• pp.385-390
• /
• 2006

In this work, the effect of carbon nanofiber (CNF) on thermal properties, and friction and wear behavior of CNF/PMMA composites were examined. While thermal properties of the composites were investigated with differential scanning calorimetry, thermograyimetric analyzer, and dynamic mechanical analyzer friction and wear behaviors were examined using a friction and wear tester. The glass transition temperature (Tg), integral procedural decomposition temperature (IPDT), storage modulus (E'), and tan ${\delta}$ appeared at higher temperatures with increasing CNF content, which were probably attributed to the presence of strong interactions between the carbonaceous fillers and the PMMA resins matrix. The wear loss in the composites decreased at 0.1 wt% CNF and then increased with 5-10 wt% CNF content. This was due to the existence of large aspect ratio CNF in PMMA which led to an alignment of PMMA chains and an increase of mechanical interlocking, resulting in the formation of crosslinked structures between CNF and PMMA in the composite.

• Fire Science and Engineering
• /
• v.29 no.2
• /
• pp.25-32
• /
• 2015

The improved thermal stability and anti-oxidation properties of lyocell fiber were studied based on flame retardant treatment by using $Na_3PO_4$ solution. The optimized conditions of flame retardant treatment were studied on various concentrations of $Na_3PO_4$ and the mechanism was proposed through experimental results of thermal stability and anti-oxidation. The integral procedural decomposition temperature (IPDT), limiting oxygen index (LOI) and activation energy ($E_a$) increased 30, 160% respectively via flame retardant treatment. It is noted that thermal stability and anti-oxidation improved based on char and carbon layer formation by dehydrogenation and dissociation of C-C bond resulting the hindrance of oxygen and heat energy into polymer resin. The optimized conditions for efficient flame retardant property of lyocell fiber were provided using $Na_3PO_4$ solution and the mechanism was also studied based on experimental results such as initial decomposition temperature (IDT), IPDT, LOI and $E_a$.

• The Journal of the Korean Society for Microbiology
• /
• v.20 no.1
• /
• pp.65-72
• /
• 1985

Vitamin C is known as an integral element for the formation and maintenance of intercellular supporting structures. Ascorbic acid has been used for the treatment of certain poisonings and hypovitaminosis(scurvy) but also known as a powerful reducing agent, and can kill a variety of bacteria and detoxify bacterial exotoxins including various clostridial exotoxins in vitro. For viruses, vitamin C inactivates herpes virus, vaccinia virus and influenza virus and has been used for the prevention and treatment of the common cold. Thus ascorbic acid plays an important role in antimicrobial action. Scurvy also promotes the development of tubercles in experimentally infected guinea pig and the tuberculosis patients require more vitamin C than normal persons. However there is no reports that ascorbic acid could inhibit the growh of M. tuberculosis. In this paper, antibacterial effects of ascorbic acid against M. tuberculosis were studied. The results are as follows: 1. The single use of the ascorbic acid exhibited antibacterial effect in vitro against $5{\times}10^3/ml$ of M. tuberculosis $H_{37}$ Rv at the concentration of ascorbic acid 0.625mg/ml over 3 hours exposure and 0.05mg/ml over 9 hours exposure. 2. In vivo mice administered with ascorbic acid 50mg/day for 5, 10 and 15 days respectively were protected from M. tuberculosis $2LD_{50}$, $3LD_{50}$, $4LD_{50}$ and $5LD_{50}$ given intravenously.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.426-432
• /
• 2015

Poly(ether sulfone) (PES) embedded diglycidylether of bisphenol-A (DGEBA) epoxy composites were fabricated for improving its mechanical properties and thermal stability. The mechanical properties such as tensile, flexural and impact strength of the composites changed significantly with the introduction of PES. The value of the fracture toughness of this composite also was increased remarkably about 24%. Thermal stability of PES/epoxy composites also improved 12%, which was calculated with integral procedural decomposition temperature (IPDT). From the differential scanning calorimeter (DSC) result, the curing temperature and curing heat decreased according to the increase of PES contents. These were attributed to the good distribution and the formation of the semi-interpenetrating polymer networks (semi-IPNs) composed of the epoxy network and linear PES.