• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1673-1675
• /
• 2001

In this paper, Partial Discharge(PD) patterns are compared by means of Low Frequency PD(LFPD, based on the IEC 270) and recently proposed High Frequency PD(HFPD). For this purpose, three different types of artificial defects are provided such as corona in air, void in epoxy insulator and needle defect in XLPE cable insulation. PD were generated from each defect and then detected respectively by two different methods such as LFPD and HFPD. As a result, remarkable resemblance in PD pattern for differ detecting method have been observed from each defect. Accordingly, it could be deduced that the pattern recognition by LFPD could be regarded as the reference for the investigations by HFPD.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.105-109
• /
• 2002

The short-term AC breakdown strength of laminated polypropylene insulating Paper (PPLP) has been studied for cold dielectric of high temperature superconductivity power cables. The design and operating conditions of the electrode system for studying of short-term breakdown strength of one-layer and multi-layer PPLP samples are discussed in liquid nitrogen(LN2) state. The influence of various operating factors (geometry and dimension of electrodes, speed of tested voltage, thickness of test sample) on the value of short-term AC breakdown strength at cryogenic temperature has been established.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.296-298
• /
• 1995

This paper proposes a new filter topology that suppresses the high voltage gradient(dv/dt) in ac motor terminals. The high voltage gradient(dv/dt) causes over voltages on the motor windings, the degradation or motor insulation, and the bearing failure. Moreover surge voltage with high voltage gradient(dv/dt) in the PWM inverter red drive system where long line cables are required causes more serious problem to the motor. Thus, the most advisable method is attaching output filter to the inverter output terminals. The conventional output filters have several problems such as bulky size, difficulty or parameter tuning. The proposed filter can be relatively smaller than the conventional filters. By the proposed filter, the shaping or PWM waveform can considerably suppress high dv/dt in motor feeding cable from the inverter. The effectiveness or the proposed filter is compared with that or the conventional one and is verified by the computer simulation.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.406-410
• /
• 1995

A superconducting cable is one of the promising methods of undground transmission of high electric power in the future. It is very important that composite insulation system of $LN_2$ and polymer films takes into consideration for application high $T_c$ superconductor. This study is about both the partial discharge and properties V-t in $LN_2$. As result, applied voltage doesn't depend on the radius of non-eroded area but eroded area. And eroded area is observed the formation such as the ring of a tree.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1175-1176
• /
• 2015

산업설비 중, 전력케이블은 설치 이후 적게는 수년에서 많게는 수십년에 걸쳐 진단없이 계속 사용 중에 있다. 인입케이블 경우, 한국전기안전공사에서 주기적으로 사업장 정기검사 시에만 DC내전압 시험을 실시하고 있으며 그 외에는 장시간 사용에도 불구하고 상태점검을 정확히 못 하고 있다. 본 연구에서는, DC내전압 시험 대신 현장에 적용되고 있는 VLF(Very Low Frequency) 진단방법에 대하여 수도사업장(취수장, 정수장 등)에서 사용 시, 진단방법 및 결과에 대한 신뢰성을 고찰하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1173-1174
• /
• 2015

내연 발전기(50 MW, 13.8 kV) 출력단자에서 차단기까지 연결된 13.8 kV XLPE(cross-linked polyethylene) 케이블에서 운전중에 절연파괴로 인해 지락이 발생하였다. XLPE 케이블의 건전성을 확인하기 위해 절연저항과 절연진단 시험을 수행하였다. 교류전압을 1~10 kV까지 증가하면서 XLPE 케이블의 유전정접 측정결과 A상과 C상은 0.1%로 일정하게 측정되었다. 반면에 B상의 유전정접은 1 kV에서 0.54%, 2 kV에서 0.68%, 3 kV에서 0.82%, 4 kV에서 1.12%로 증가하였다. 그리고 교류전압을 약 4.3 kV 인가 중에 진단장비가 차단되었다.

• International Journal of Safety
• /
• v.7 no.1
• /
• pp.10-14
• /
• 2008

For evaluating the radiation degradation of cross-linked polyethylene (XLPE) cable insulation due to the irradiated oxidation, XLPE was irradiated with ${\gamma}$-ray. For each irradiated samples, TGA, DSC, FT-IR, and tensile tests were carried out. Regarding radiation degradation, oxidative process was predominant. TGA, DSC and FT-IR can be useful tools for evaluating the radiation degradation due to the irradiated oxidation because these analyses need only small amount of samples. The results of TGA, DSC and FTIR analyses showed the similar tendency for irradiated degradation. They can be useful tools for evaluating the oxidation of insulating material by non-destructive testing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.432-435
• /
• 2003

최근 초고압 케이블 절연체로 XLPE(가교 폴리에틸렌)이 널리 사용되어 지면서 XLPE의 여러 물리 화학적 특성에 따른 절연 성능에 관한 연구가 활발히 이루어지고 있다. 이러한 XLPE 절연층은 제조과정에서 압출과정을 거쳐 도체를 감싸게 되는데 이 과정에서 흐름 패턴으로 나타나는 비등방성(anisotropy)을 띠게된다. 본 논문에서는 초고압 XLPE 케이블에서 시계 방향으로 나타나는 비등방성(anisotropy)이 나타내는 기계-전기적 특성을 인장강도(tensile strength), 트리 개시전압 및 개시시간을 측정한 결과를 토대로 고찰해 보았으며, 이러한 비등방성이 초고압 XLPE 케이블의 절연 성능에 영향을 주는 인자로 고려되어야 함을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2136-2138
• /
• 1999

In this study, we describe the change of electrical properties of XLPE with electrical-tree degradation. XLPE insulation was used as specimen which was cut off from 22.9kV XLPE insulated cable and made in a type of block. The applying voltages are 8kV, 10kV, 12kV and frequency is 60Hz Ogra needles having tip radius of 10$\mu\textrm{m}$ were inserted in blocks. PD quantity and $tan{\delta}$ and DC current were measured from inception of tree to breakdown and their characteristics were analyzed.

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.152-152
• /
• 2003