• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1497-1502
• /
• 2013

Recently, the junctionless (JL) transistors realized by a single-type doping process have attracted attention instead of the conventional metal-oxide-semiconductor field-effect transistors (MOSFET). The JL transistor can overcome MOSFET's problems such as the thermal budget and short-channel effect. Thus, the JL transistor is considered as great alternative device for a next generation low standby power silicon system. In this paper, the JL FinFET was simulated with a three dimensional (3D) technology computer-aided design (TCAD) simulator and optimized for DC characteristics according to device dimension and doping concentration. The design variables were the fin width ($W_{fin}$), fin height ($H_{fin}$), and doping concentration ($D_{ch}$). After the optimization of DC characteristics, RF characteristics of JL FinFET were also extracted.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2015년도 제52차 하계학술대회논문집 23권2호
• /
• pp.101-102
• /
• 2015

본 논문에서는 다수의 생체계측 정보를 MDEC(Medical Device Exchange Communication) 기반의 공통모듈을 이용하여 중앙 집중 관리를 위한 CMS(Central Monitoring System)를 제안한다. 기존의 바이탈사인 모니터 등은 환자별로 부착되어 다수의 환자에 대한 이상 징후를 실시간으로 모니터링하기에는 어려움이 있다. 이에 본 논문에서는 다수의 계측 장비를 통합하는 공통모듈인 MDEC을 이용하여 집중 모니터링이 가능한 CMS을 구현하였다. 계측장비와 MDEC의 패킷 송수신을 위한 프로토콜을 설계하고 네트워크로 전송된 패킷은 CMS에 표시되며 데이터베이스에 저장된다. 본 연구의 결과는 급속히 증가하는 병원내 환자 관리 및 효율적 의료서비스에 기여할 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1078-1080
• /
• 2003

This paper proposes the boost input type resonant power supply for driving the magnetron device of the high-capacity microwave oven. Circuit topology of the proposed power supply is the boost input type resonant converter which uses the resonance between transformer leakage inductance and resonance capacitance. Proposed power supply obtains high power factor more than 98% through continuous current mode pulse width modulation. To verify the validity of the proposed power supply, operation principle in the steady state is analyzed and experimental results are presented.

• 센서학회지
• /
• 제20권4호
• /
• pp.260-265
• /
• 2011

The silicon vertical hall devices are fabricated using a modified bipolar process. It consists of the thin p-layer at Si-$SiO_2$, interface and n-epi layer without $n^+$buried layer to improve the sensitivity and influence of interface effects. Experimental samples are a sensor type I with and type H without p+isolation dam adjacent to the center current electrode. The experimental results for both type show a more high current-related sensitivity than the former's vertical hall devices. The sensitivity of type H and type I are about 150 V/AT and 340 V/AT, respectively. This sensor's behavior can be explained by the similar J-FET model.

• 토지주택연구
• /
• 제11권1호
• /
• pp.103-108
• /
• 2020

Autonomous things system is a technology that judges and acts based on using surrounding information by itself, and it is evaluated as a future technology that can replace the current IoT technology. The current IoT technology is widely used from facility monitoring to machine control but it is shown weakness as a evaluation and prediction technique despite of smart city important technology. In this study, in order to confirm the application of the autonomous things technology, a monitoring system was installed on a real reservoir dam facility and long-term monitoring was performed that the measuring device itself judges and control as a facility monitoring technology. The autonomous things technology was confirmed during 19 months and it is possible to continuous measurement in the same way as current automated instrumentation. In addition, it was confirmed that the ICT device itself could to control autonomously measurement cycle according to the rainfall by itself.

• 한국통신학회논문지
• /
• 제18권9호
• /
• pp.1332-1347
• /
• 1993

기존의 계측기기는 기능에 따라 독립적으로 이루어져 사용자는 사용목적에 따라 각각의 계측기를 이용하여 원하는 계측 시스템을 구성하였다. 그러나 1980년대 후반 VXIbus는 다양한 계측장비를 각각 한장의 카드로 만들어 선택적으로 계측시스템을 구성하는것을 가능하게 하였다. VXIbus의 기본전인 통신 프로토콜에는 word serial 프로토콜이 있다 . 그러나 측정된 데이타의 양이 증가하게 되면 word serial 프로토콜로 인한 전체 시스템의 성능 저하를 가져오게 된다. 본 논문에서는 이러한 성능제한요소를 해결하기 위하여 공유(shared) 메모리 프로토콜을 제안하고, 기존의 word serial 프로토콜과 공유메모리 프로토콜을 GSPN(Generalized Stochastic Petri Net)를 이용하여 분석하였다. 분석한 결과 공유메모리 프로토콜이 word serial 프로토콜보다 성능이 우수함을 알 수 있었다. 또한 제안된 공유 메모리 구조를 갖는 VXIbus 시스템을 구현하였으며 사용된 계측기기로는 VXIbus인터페이스 모듈과 VMEbus 전용 신호처리모듈로 구성 된 FFT 분석 디바이스 그리고 신호발생 디바이스가 이용되었다. FFT 분석실험 결과 최대 80 KHz 입력신호에 대하여 정확하게 분석되었으며 이 결과는 기존의 FFT분석기의 결과와 잘 일치하였고, 신호발생 실험에서는 200 KHz에서 1.1GHz까지의 정현파 신호가 발생되었다.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.134-140
• /
• 2018

This paper describes the design and fabrication of an automatic alignment and loading system for workpieces. To move a workpiece to a chucking position of a machine tool using a gantry robot, an automatic aligning device is required to load the workpiece before machining and automatically align them. The automatic alignment system was conceptually designed, and the structural analysis was performed for the main parts such as the top plate, center support, front and back support, and support shaft. Based on the structural analysis results, the size of these structures was determined. The automatic alignment system was manufactured, and the vertical movement characteristics of the workpiece up-and-down movement device and the rotation characteristics of the workpiece rotation device were experimentally examined. The result has confirmed that they operate normally.

• 제어로봇시스템학회논문지
• /
• 제15권4호
• /
• pp.406-412
• /
• 2009

ECG is used on purpose to keep good health or monitor cardiac function of aged person as well as on purpose to diagnose the disease of heart patients. The ambulatory ECG monitoring system under guarantee of safety and accuracy is very efficient to prevent the progress of heart disease and sudden death. These systems can detect the temporary change of ECG that is very significant to diagnose heart disease such as myocardial ischemia, arrhyamia and cardiac infarction. In this paper, we describe the ECG signal analysis algorithm and measurement device for ECG monitoring. The authors designed a small-size portable ECG device that consisted of instrumentation amplifier, micro-controller, filter and RF module. The device measures ECG with four electrodes on the body and detects QRS complex and ST level change in realtime. Also it transmits the measured signals to the personal computer. The developed software for ECG analysis in personal computer has the function to detect the feature points and ST level changes.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.85-92
• /
• 2020

In this study, the automatic processing of the wing ribs of large aircraft was simulated. Specifically, in the simulation for the automatic processing of the fly ribs, the process of the automated loading device with a robot was examined, along with the wing rib processing and manufacturing automation processes. Moreover, the process time, corresponding to all the stages in the wing rib processing, was calculated. The results pertaining to the machining and manufacturing times of 34 wing ribs (Nos. 1-17), as obtained through the proposed simulation approach, indicated that the total machining time for the left and right wing ribs and rib guns was 537.7 h. The production time was calculated as 1,117.4 h. It is considered that the processing of the wing ribs of large aircraft can be automated in a factory, based on the results of the proposed simulation process.

• 한국정밀공학회지
• /
• 제27권11호
• /
• pp.37-45
• /
• 2010

Stroke patients can't use their hands because of the paralysis of their fingers. Their fingers are recovered by rehabilitating training, and the rehabilitating extent can be judged by grasping a spherical object. At present, the used object in hospital is only a spherical object, and can't measure the force of fingers. Therefore, doctors judge the rehabilitating extent by touching and watching at their fingers. So, the spherical object measuring system which can measure the force of their fingers should be developed. In this paper, the finger-force measuring system with a six-axis force/moment sensor which can measure the spherical-object grasping force is developed. The six-axis force/moment sensor was designed and fabricated, and the force measuring device was designed and manufactured using DSP (digital signal processing). Also, the grasping force test of men was performed using the developed finger-force measuring system, it was confirmed that the average force of men was about 120N.