• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1266-1269
• /
• 2003

Many studies have indicated that most of a product's cost is fixed early in its lift cycle, before the original design cycle is complete. This implies that we should consider various aspects of product lift cycle at the design stage. This means the need of collaboration in design stage. Because the Internet provides instant access to a wealth of design information, the Internet is used by the collaborative design team members as a medium to share data, information and knowledge, and in some cases for product data management and project management by integrating the Web with appropriate technologies. This paper presents a real-time collaborative design system for powerful interaction performance, based on the Internet and Web technologies. Using The system use the client/server architecture and the purpose of the system is to provide a method that enables real-time view, review and modification of the 3D model through the Internet.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.86-88
• /
• 1999

We investigated the current limiting characteristics of resistive and inductive SFCLs with $100{\Omega}$ of quench impedance for a line-to-line fault in the 154 kV transmission system. The fault simulation at the phase angles $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ showed that the resistive SFCL limited the fault current less than 15 kA without any DC component after one half cycle from the instant of the fault. On the other hand, the inductive SFCL suppressed the current below 13 kA, but with $2{\sim}3\;kA$ of DC component which decreased to zero in 6 cycles. We concluded that the inductive SFCL had higher performance in current limiting but the resistive SFCL was better from the view point of DC components.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1387-1391
• /
• 2007

In this study, water quality prediction that is necessary to water quality forecasting system is performed using 2-D river analysis models RMA-2 and RAM4. RAM4 is suitable to water quality forecasting system cause it is possible to put in the pollutants as a mass type boundary condition. Instant injections of pollutants at Yongdamdaegyo Bridge in Namhangang River are simulated and the behavior of pollutant cloud is observed. The effects of water quality accident to Paldang 2 water intake plants in Paldangho Lake is analyzed with time variation. And extra flow simulation is performed for mitigation of pollution. Several cases of water quality forecasting system at home and abroad are investigated and the direction of water quality forecasting system is presented.

• Journal of Biomedical Engineering Research
• /
• v.20 no.4
• /
• pp.427-433
• /
• 1999

The purpose of the study is to develop an improved pitch extraction method that can be used in a variety of speech applications such as high-puality compression and vocoding, and recognition and synthesis of speech. To do so, we develop a new electroglottograph (EGG) measurement system that is based on the four modulation-demodulation type spot electrodes for detecting the EGG signals. Then, the glottal closure instant(GCI) is determined from the EGG signals on a real-time basis. We can obtain the pitch contour using the information on the GCI. It turns out that the new pitch contour algorithm (PCA) operates more reliably as compared to the conventional speech-only-based algorithm. In addition, we study the speech source models and glottal vibratory patterns for Koreans by measuring and analyzing the diversified vibration patterns of the vocal from the EGG signals.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.606-608
• /
• 1996

In this paper, a new control scheme based on deadbeat control with disturbance observer for voltage controlled Inverter system is proposed. The inverter system is modelled as the 4th-order system treating R load current variation caused by disturbance. So the disturbance observer exists in the state observer. By using the pole placement strategy, the observer estimates the state and disturbance variable of the next sampling instant. Simulation results so show that The proposed scheme has robust feature against disturbance.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.148-157
• /
• 1994

A multi-cylindrical hydraulic valve incorporating with an electro-rheological(ER) fluid is developed in this study. Field-dependent Bingham properties of the ER fluid are exploited to devise the valve system which features fast system response as well as simple mechanism. The fast response is accrued from almost instant response characteristics of the ER fluid itself, and the mechanism configuration is simplified since no nechanically moving parts are required. The material properties of the ER fluids to be utilized for modeling of the proposed valve system are firstly tested with a couette-type electroviscometer. The design and manufacturing processes are then undertaken on the basis of model parameters. The performance characteristics of the valve system are evaluated in terms of pressure variations with respect to the intensity of employed electric fields and flow rates.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.5
• /
• pp.1065-1075
• /
• 2001

It is common knowledge amongst electrical and marine engineers that short-circuit in electrical system may cause large mechanical torque on generator and prime mover However, it is not so widely known that the faulty synchronizing of generators may cause even higher torques than that of short-circuit. In this study, the transient phenomena related to the parallel running of synchronous generators are analyzed and the exact computer simulation method is proposed. In result, maximum transient torque and current take place in case of $120^{\circ}$ voltage angle difference between Master and Slave and that may develop higher torque than the short-circuit according to a condition of synchronizing. When synchronizing in power system using only two generators higher torque and current occur Master, but using multimachine system those occur to Slave. The short-circuit of marine generator does not happen frequently but faulty synchronizing sometimes takes place, therefore, it is necessary for designers to consider these phenomena.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.9
• /
• pp.327-339
• /
• 1984

In this paper we present how to design the software-based speed and position controller of a DC servo drive system for an educational robot. The controller designed by fully digital scheme consists of a CPU, drive unit, encoder pulse coding unit, speed and position detector. The control algirithm of the controller is a hybrid one such that speed control and position control are switched at some instant to get more accuracy. The experimental resusts of the proposed DC servo-controller show good performances for the position and speed control of the proposed educational robot system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.58-63
• /
• 1998

B.Widrow established fundamental relations between the least-mean-square (LMS) algorithm and the digital Fourier transform［1］. By extending these relations, we proposed the short time spectra analysis system using the LMS algorithm［2]. In that paper, we used the normal LMS algorithm on the thought of dealing with only real analytical signal. This algorithm minimizes the real mean-square by recursively altering the complex weight vector at each sampling instant. But, the short time spectra analysis sometimes deals with the complex signal that is outputted from complex analog filter. So, in order to optimize and develop this methods, furthermore it is necessary to derive an algorithm for the complex analytical signal. In this paper, we first discuss the new adaptive system for the spectra analysis using the complex LMS algorithm and then derive convergence condition, time constant of coefficient adjustment and frequency resolution by extending the discussion. Finally, the effectiveness of the proposed method is experimentally demonstrated by applying it to the measurement of transfer performance on complex analog filter.

• Journal of the military operations research society of Korea
• /
• v.18 no.1
• /
• pp.15-31
• /
• 1992

Developments toward a 'the end of the Cold War' are the main factor determining the situation in the Korean Peninsula. While all the combat resources of North Korea are systematically controlled and kept available for instant mobilization even in peacetime. South Korea is inferior to North Korea in terms of mobilization system and efficiency, exercise intensity and equipments. In sum, the South faces far greater restraints in wartime conversion capability than does the North. Mobilization refers to a nation's compulsory control, management and operation of its human and material resources for the purpose of national security. The total capability for safeguarding national security must be pursued by the continuous examination and complementation of our mobilization system and capability. This paper proposes an efficient management of national mobilization system that can be instantly operated on the whole in time of national emergency. Therefore, the actual operation of National Security Council is suggested to prepare operations against the emergencies and establish the foundation for national security.