• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.199-202
• /
• 2007

In storm sewer networks a lot of manholes are installed to maintain and connect a sewer of urban area. There are some shapes of manhole such as circular type, square type, and so on. Square shape manholes are installed to connect the large diameter drainage pipes in general and have lager head losses than circular one. Consequently, it is important to analyze the head losses in square manhole because the head losses in square manhole are much bigger than the friction losses in pipes. Hydraulic experimental apparatus which can be changed the inside shape in square manhole was installed for this study. The experimental discharge was $16{\ell}/sec$. The head loss coefficients in the manhole were calculated by the experimental results. The range of head loss coefficients in the general square manhole were from 0.33 to 0.48 and the range of head loss coefficients in the square manhole changed inside shape were from 0.23 to 0.28.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.335-338
• /
• 2007

본 연구에서는 항공기 추진기관의 정확한 장착 성능해석 시 고려하여 할 주요 장착 손실 중 흡입구의 압력 손실을 계산하기 위해 2D 모델링을 수행하였으며 해석 결과를 이용하여 비행마하수와 유량에 따른 흡입구 압력손실 값을 나타낸 0D 성능 맵을 생성하였다. 이러한 성능 맵 생성 절차의 타당성을 검증하기 위해 일반적인 항공기용 엔진 흡입구 형상에 적용하여 타당성을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.263-267
• /
• 2008

본 연구에서는 헬리콥터 추진시스템의 장착 성능해석 모델링 시 고려하여야 할 흡입구 모델, 블리드 공기 손실, 보기류 시스템 구동에 사용되는 출력 추출 등을 포함한 장착 성능해석을 수행하였다. 흡입구의 압력 손실은 비행마하수와 유량에 따른 압력손실 값으로 나타낸 흡입구 성능 맵을 이용하였다. 추진시스템 장착 성능해석 모델링의 검증을 위해서는 실제 시험데이터와 비교해야 하지만 데이터 확보가 어려워 상용성능해석 프로그램인 GASTURB 해석결과와 비교 하였다. 해석결과 평균오차 0.5% 이내로 본 연구에서 수행한 추진시스템의 장착 성능해석 모델링의 타당성을 검증하였다.

• 한국추진공학회지
• /
• 제12권1호
• /
• pp.51-56
• /
• 2008

본 연구에서는 헬리콥터 추진시스템의 장착 성능해석 모델링 시 고려하여야 할 흡입구 모델, 블리드 공기 손실, 보기류 시스템 구동에 사용되는 출력 추출 등을 포함한 장착 성능해석을 수행하였다. 흡입구의 압력 손실은 비행마하수와 유량에 따른 압력손실 값으로 나타낸 흡입구 성능 맵을 이용하였다. 추진시스템 장착 성능해석 모델링의 검증을 위해서는 실제 시험데이터와 비교해야 하지만 데이터 확보가 어려워 상용성능해석 프로그램인 GASTURB 해석결과와 비교하였다. 해석결과 평균오차 0.5% 이내로 본 연구에서 수행한 추진시스템의 장착 성능해석 모델링의 타당성을 검증하였다.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1318-1326
• /
• 2008

This paper proposes an alternative methodology for deciding an optimum deterministic reliability level (IRR; Installed Reserve Rate) by using probabilistic reliability criterion (LOLE; Loss of Load Expectation). Additionally, case studies using the proposed method induce the characteristics of relationship between the probabilistic reliability index (LOLE) and deterministic reliability index (IRR) for 2008 and 2010 years in Korea power system. The case study presents a possibility that an optimum IRR level in Korea can be assessed using the proposed method. Korea power system has been using the LOLE criterion to determine the adequacy of installed capacity (ICAP) requirement. The criterion in Korea is that the loss of load expectation shall not exceed the available capacity more than five day in ten years (=0.5[days/year]), The probabilistic reliability evaluation and production cost simulation program which is called PRASim is used in order to evaluate the relationship and optimum IRR in this paper.

• 물과 미래
• /
• 제10권1호
• /
• pp.20-24
• /
• 1977

43,000 shallow water wells have been installed as a part of all weather irrigation water supply project executed during 1969 to 1970 in all over Korea penninsula in order to solve water shortage problem of farming land by developing shallow ground water reserved in unconsolidated materials. But after 3 years later it was reported that 34% of the wells were abandoned by the reasons of artificial and natural defects. 48 wells distributed uniformly in the penninsula are selected to determine their well loss constants, relation between well loss and specific capacity, and tophographic classification of the well loss on the shallow water well. The results show that average well loss consatnt and the value of $CQ^2/S_w$ is ranged from $5.95{\times}10^{-5}\;to\;3.65{\times}10^{-8}Day^2M^{-5}$ and from 35.5% to maximum 68.48% respectvely and that relation between specific capacity and well loss constant can be approximately formulated as $C=0.61S_p2.246$ However this result indicates that most wells installed in this time have too high value of well loss constant $CQ^2/S_w$ in comparison with properly deseigned well. The most favorable and producable water bearing formation among unconsolidated deposits such as sand & gravel, boulderly gravel, clayey boulderly gravel, and sand formation in Korea is sand formation deposited in center of valley.

• Journal of Korean Dental Science
• /
• 제2권2호
• /
• pp.12-17
• /
• 2009

Purpose : To determine whether peri-implant crestal bone loss could be affected by systemic disease, primary ISQ value, implantation method (submerged vs. non-submerged), surface treatment, and bone density Materials and methods : Patients who underwent fixture installation from June 24, 2005 to October 23, 2008 at Seoul National University Bundang Hospital were evaluated. A total of 157 patients (male: 52, female: 85) had 346 fixtures installed. Among them, 49 patients had periapical radiographs taken 1 year after prostheses were first set. A total of 97 fixtures were implanted. In particular, 30 fixtures were installed in patients with systemic diseases such as diabetes mellitus, cardiovascular disease, hypertension, and liver disease. The immediate stability of implants was measured with $Osstell^{tm}$. Implant surface treatment was classified into two groups (RBM, Cellnest (Anodized)), and bone density, into four groups (D1~D4). The bone resorption on the mesial and distal areas of fixtures was measured with periapical radiographs using the paralleling technique, and the mean value was calculated. The length determination program in IMPAX (AGFA, Belgium) was used. Results : At least 332 out of 346 (96%) installed GS II implants were successfully osseointegrated 1 year after prostheses were first set. The mean value of the bone resorption of the installed GS II implants was 0.44mm. The minimum value was 0mm, and the maximum value, 2.85mm. There was a statistically significant difference between the implantation methods (submerged, non-submerged) with regard to the amount of alveolar bone loss 1 year after prostheses were first set (p<0.05). Non-submerged implants showed less crestal bone loss. Note, however, that other variables had no correlation with crestal bone loss (p>0.05). Conclusion : There was a statistically significant difference between the 1-stage method and 2-stage method with regard to the amount of alveolar bone loss 1 year after prostheses were first set. Systemic disease, primary ISQ value, surface treatment, and bone density were not associated with alveolar bone loss. Other variables were assumed to have a correlation with alveolar bone loss.

• 한국철도학회논문집
• /
• 제19권2호
• /
• pp.124-134
• /
• 2016

철도 선로에 근접하여 설치하는 근접 저상 방음벽은 방음벽 높이를 저감시키기 위한 방안으로 외국에서는 많은 연구가 수행되고 있으나 국내에서의 연구는 매우 미흡한 실정이다. 본 논문에서는 근접 저상 방음벽의 음향특성을 파악하고자 축척 모형을 제작하여 성능평가를 수행하였다. 실험결과, 'ㄱ'자형 방음벽 설치 시에는 방음벽의 안쪽뿐만 아니라 상부에도 흡음재를 설치하는 것이 삽입손실의 개선효과가 있는 것으로 분석되었고, 방음벽의 삽입손실 평가를 위해 단순한 경험식 대신에 경계요소법과 같은 보다 해석적인 방법으로 삽입손실을 예측할 필요가 있다. 또한, 흡음재를 부착한 근접 방음벽을 설치하면 승객 위치에서의 소음 증가현상은 미미한 것으로 분석되었다. 그리고, 근접 방음벽의 음향성능 예측을 위해 2차원 경계요소법을 이용한 소음해석을 수행하였으며, 측정결과와의 비교 분석을 수행함으로서 예측 프로그램의 활용 가능성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.103-104
• /
• 2008

This paper proposes an alternative methodology for deciding an optimum deterministic reliability level (IRR; Installed Reserve Rate) by using probabilistic reliability criterion (LOLE; Loss of Load Expectation). Additionally, case studies using the proposed method induce the characteristics of relationship between the probabilistic reliability index (LOLE) and deterministic reliability index (IRR) for 2008 year in Korea power system. The case study presents a possibility that an optimum IRR level in Korea can be assessed using the proposed method. Korea power system has been using the LOLE criterion to determine the adequacy of installed capacity (ICAP) requirement. The criterion in Korea is that the loss of load expectation shall not exceed the available capacity more than five day in ten years (=0.5[days/year]). The probabilistic reliability evaluation and production cost simulation program which is called PRASim is used in order to evaluate the relationship and optimum IRR in this paper.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.287-292
• /
• 2001

The objective of this study is to verify the secondary flow and the total pressure loss distribution in the boundary layer fence installed linear turbine cascade passage and to propose an appropriate height of the boundary layer fence which shows the best loss reduction among the simulated fences. In this study three different boundary layer fence was installed which have different height. This study was performed by numerical method and the result showed the boundary layer fence which has the height of one third of the inlet boundary layer thickness showed the best loss reduction rate.