• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.335-340
• /
• 2004

To analyze risk factors of temporary power installations, the investigation was carried out for power receiving system and pack and panel boards at construction sites. The subject was variable such as an airport, an apartment, a municipal playground. There are many risk factors caused by inadequate working environments and the deterioration of temporary power installations using equipment with minimum safety devices at construction sites. There, it is intended to present problems and preventive measures against electrical shock accidents, through analyzing risk factors of real field condition and investigating temporary power installations all over the country.

• 조명전기설비학회논문지
• /
• 제18권6호
• /
• pp.197-204
• /
• 2004

건설현장에서 공사기간 중 일시적인 전원공급을 위하여 사용되는 임시전력설비는 영구설비와 달리 최소한의 보호장치만을 구비하여 운용되는 설비로서, 산만한 작업환경, 전기설비의 재사용으로 인한 노후화 등의 불안요인에 의해 타설비에 비해 많은 감전위해요인을 나타내고 있다. 이에 임시전력설비의 감전위험요소를 분석하기 위해 수전 설비, 배ㆍ분전반 등에 대한 실태조사 및 설문조사가 병행하여 실시되었으며 관련 전문가, 연구원, 한국전기안전공사 기술자 등에 의해 전국적으로 실시되었다. 그 대상은 공항, 아파트, 시립운동장 등 다양하였다. 실태조사의 분석 결과 자물쇠장치의 불량, 충전부 방호의 미흡 등 문제점이 나타났으며 이를 해소하기 위해서는 관련 제도개선 안전교육, 안전점검 등이 이루어져야 한다. 향후 분석 자료는 건설현장에서의 감전사고를 방지하는데 활용될 수 있으며 전기설비를 안정화시키는데 이용될 수 있을 것이다.

• 정보통신설비학회논문지
• /
• 제3권2호
• /
• pp.33-41
• /
• 2004

This paper describes a development of smart power outlet and controller installation which is equipped for discrete power load environment such as office and home appliance. This system will sense a real-time power consumption and analyze the status, then, will keep optimal power use condition. The proposed method is applied to the real design, and that experimental results showed good performances on the wall-outlet, also, is expected to be used in the smart home automation installations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1721-1723
• /
• 2002

This paper deals with the analysis of field condition for earth leakage current alarming system in the stage lighting, stage sound stage machinery installation. These analyses of field condition were carried out in accordance with investigating an installation of earth leakage current alarming system with respect to a main line of power source, dimmer, sound equipment, machinery mobile unit equipment and so on. As a result of analyses. The earth leakage current alarming system has been installed only a part of the main line of power source and the probability of places which were installed was less than 50(%). Therefore, it is desirable that the earth leakage current alarming system is installed at places which are suitable, for example, dimmer, each kind machinery etc. in order to prevent electrical hazard.

• 한국가스학회지
• /
• 제20권3호
• /
• pp.38-45
• /
• 2016

이 논문에서 암모니아 가스의 실내 누출 및 확산 현상을 FLACS 소프트웨어를 이용하여 시뮬레이션한 결과, 암모니아 가스가 실내에서 폭발 위험분위기를 쉽게 형성함을 확인하였다. 따라서 암모니아 가스를 냉매가스로 사용하는 고압가스 냉동제조시설의 냉동실은 환기장치를 갖추거나 가스누출검지경보장치를 설치하여야 한다. 그러나 냉동시설의 특성상 이들 설비를 설치할 수 없기 때문에 재발방지대책으로 암모니아 가스설비의 전기설비는 방폭구조로 설치하고 고압가스 냉동제조시설에서 가스누출 등의 이상사태가 발생하는 경우에 사업장 안의 모든 종사자가 신속히 대피할 수 있도록 통신시설을 설치할 필요가 있다.

• 전기학회논문지P
• /
• 제56권3호
• /
• pp.142-147
• /
• 2007

Infrared thermography is one of the most valuable and cost-effective diagnostic techniques for predictive maintenance on electrical systems. For the electric installations, the thermographies can identify major problems, which if left unattended could lead to breakdowns. The result thermal images depend upon operator skills, inspection technique, and load and weather conditions. When the thermographer is applied to remote monitoring, the conditions of the systems are not perfectly analyzed because operators are hard to know the weather's effects of the installed place. Therefore, this paper defines the effects by weather conditions which will influence the final results. The purpose of this paper is to define the weather effects that a thermographer needs to consider for successful condition analysis.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.1-8
• /
• 2013

Recently, the automotive technology has developed with electronics and information technology as convergence technology while vehicles had been regarded as machines. Moreover, vehicles are becoming more intelligent and safer devices, assembly of advanced technologies by customers' demand. Even though all of installations of vehicle have attracted as diverting devices, it cause drivers' mistakes like delay of response on traffic condition. Here, we proposed the Field Operational Test (FOT) environment which could be used as driving and road conditions collector(Vehicle motion, Traffic condition, Driver input, Driver state, etc.) for researches about Driver Friendly Intelligent System(SCC, LDWS, etc.), Human Vehicle Interface(Driving Workload, etc.) and Economic Drive Model. Furthermore driving patten and fuel consumption patten of drivers were analyzed by measured data and direction of future research was suggested.

• 한국안전학회지
• /
• 제30권2호
• /
• pp.41-47
• /
• 2015

Recently, a lot more disasters in the temporary structures happen because the stabilities of the temporary structures are disregarded by the reduction of the unit cost, using defective materials, the existing materials and so on. Pipe supports, which are one of the temporary structures, are basically used for the most constructing works such as buildings, bridges, plants and so on. In the most sites, adequate support installations of the pipe supports have not been performed although the presence of the guideline legally and institutionally. In this study, therefore, the collapse accidents of the pipe supports were investigated on the basis of theoretical analysis as well as the buckling tests by simulating the site support condition. Both the theocratical analysis and test results show that the buckling load in the fixed ends is at least 4 times larger than one in the pinned ends. This results will be utilized for safety assurance as well as accident prevention the in the field application.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2107-2119
• /
• 2022

Accurate remaining useful life (RUL) prediction for critical components of nuclear power equipment is an important way to realize aging management of nuclear power equipment. The electric gate valve is one of the most safety-critical and widely distributed mechanical equipment in nuclear power installations. However, the electric gate valve's extended service in nuclear installations causes aging and degradation induced by crack propagation and leakages. Hence, it is necessary to develop a robust RUL prediction method to evaluate its operating state. Although the particle filter(PF) algorithm and its variants can deal with this nonlinear problem effectively, they suffer from severe particle degeneracy and depletion, which leads to its sub-optimal performance. In this study, we combined the whale algorithm with regularized particle filtering(RPF) to rationalize the particle distribution before resampling, so as to solve the problem of particle degradation, and for valve RUL prediction. The valve's crack propagation is studied using the RPF approach, which takes the Paris Law as a condition function. The crack growth is observed and updated using the root-mean-square (RMS) signal collected from the acoustic emission sensor. At the same time, the proposed method is compared with other optimization algorithms, such as particle swarm optimization algorithm, and verified by the realistic valve aging experimental data. The conclusion shows that the proposed method can effectively predict and analyze the typical valve degradation patterns.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.49-60
• /
• 2004

Industrial facilities are becoming more complex and various with rapidly developing technologies. A number of installations and equipments are increased to improve productivity, and they are operated under the condition of high temperature and pressure. They are continuously repaired, replaced or abolished because of the deterioration with time, but their repair and replacement are not easy for economical and environmental concerns. If possible, the deteriorating equipments should be inspected and repaired effectively considering the state of maintenance and preservation, economic efficiency, and safety. That's where RBI(Risk Based Inspection) fits in. Even if RBI technology has been known among specialists, there were no tools readily available and it was hard to practice and apply RBI in industrial inspection and safety management. In the development of the qualitative RBI, the overall algorithm adopted API-581 BRD. The qualitative RBI program was developed to search the appling process.