• 제목/요약/키워드: Installation Effect

검색결과 1,466건 처리시간 0.021초

전기저장장치의 건물수용가 적용에 따른 Demand영향 및 경제성 향상방안 (An Analysis of Economy Improvement Method and Power Demand Effect when the Battery is Applied to the Building Based on the Measured Energy Consumption)

  • 양승권
    • 조명전기설비학회논문지
    • /
    • 제29권5호
    • /
    • pp.86-93
    • /
    • 2015
  • Recently, ESS became efficient device to stabilize electric power supply system with the development SG related technology. In fact. there are some constraints to supply ESS, because of the high cost and required space, but rapid technology development for ESS will make it more useful soon. So, through this paper, we analyzed the benefit and demand effect when the battery is applied the building based on the measured energy consumption. After that, we got the conclusion that there is a volume limit in ESS application, in a benefit view point. And we realized that there is a demand violation, and the Cost-based BEMS is the best solution to enhance the effect of ESS application.

횡방.향하중을 받는 그물식 뿌리말뚝의 최적 타설경사각 (The Optimum Installation Angle of Reticulated Root Piles under Lateral Loads)

  • 이승현;김명모
    • 한국지반공학회지:지반
    • /
    • 제13권4호
    • /
    • pp.55-66
    • /
    • 1997
  • 본 연구에서는 그물식 뿌리말뚝의 타설경사각과 횡방향저항력 사이의 관계를 비교분석하고자 여러가지의 타설경사각을 갖는 모형 그물식 뿌리말뚝을 제작하여 모형지반에 설치한 다음 횡방 향재하시험을 하였다. 모형 뿌리말뚝의 배치는 12개의 말뚝을 6개씩 2개의 크고 작은 동심원에 접하도록 하였는데 각각의 시험에 사용한 모형말뚝은 $0^{\circ}\;, 5^{\circ}\;, 10^{\circ}\;, 15^{\circ}\;, 20^{\circ}\;, 25^{\circ}$의 타설경사각을 갖 는 직경 5m의 강봉에 모래를 입힌 것이다. 횡방향하중을 받는 뿌리말뚝에 있어서 실험을 통해 얻은 하중변위곡선으로 판단해 볼 때 1mm정도의 횡방향변위에서는 타설경사각이 커질수록 횡방향저항력도 커지지만 최적 타설경사 각은 횡방향변위가 증가할수록 감소하며 6mm의 횡방향변위에서는 $17.5^{\circ}$. 타설경 사각 $0^{\circ}$횡방향저항력에 대한 최적 타설경사각에서의 횡방향저항력의 비는 횡방향변위가 증가할수록 감소하므로 횡방향변위가 커질수록 말뚝을 경사지게 배치함으로써 얻는 저항력 증대효과는 줄어들 것으로 예상된다.

  • PDF

A Study on the Dynamic Analysis of Mooring System During Hook-up Installation

  • Lee, Min Jun;Jo, Hyo Jae;Lee, Sung Wook;Hwang, Jea Hyuk;Kim, Jea Heui;Kim, Young Kyu;Baek, Dong Il
    • 한국해양공학회지
    • /
    • 제34권5호
    • /
    • pp.285-293
    • /
    • 2020
  • This study evaluated the Hook-up installation of an offshore site construction process, which is the final step in an offshore site installation process. During Hook-up installation, the offshore structure can have a detrimental effect on the work stability due to low-frequency motion. Moreover, economic costs can be incurred by the increase in available days of a tugboat. Therefore, this study developed a numerical analysis program to assess the dynamic behavior of mooring systems during hook-up installation to analyze the generally performed installation process and determine when the tugboat should be released. In this program, the behavior of an offshore structure was calculated using Cummin's time-domain motion equation, and the mooring system was calculated by Lumped mass method (LMM). In addition, a tugboat algorithm for hook-up installation was developed to apply the Hook-up procedure. The model used in the calculations was the barge type assuming FPSO (Floating production storage and off-loading) and has a taut mooring system connected to 16 mooring lines. The results of the simulation were verified by comparing with both MOSES, which is a commercial program, and a calculation method for restoring coefficient matrix, which was introduced by Patel and Lynch (1982). Finally, the offset of the structure according to the number of tugboats was calculated using the hook-up simulation, and the significant value was used to represent the calculation result.

규소강판을 이용한 실드케이스의 차폐효과 (A Study on Shield Effect of Shield Case using SiFe Sheet)

  • 신동규;김영학
    • 조명전기설비학회논문지
    • /
    • 제28권2호
    • /
    • pp.48-53
    • /
    • 2014
  • The shield effect of 4 layered shield case was investigated in this paper. The material of the case was non-oriented SiFe sheet with a thickness of 0.5mm. The size of the case was 100mm wide, 100mm high and 300mm long. Relative permeability of SiFe sheet was needed to calculate shield effect. It was obtained from the measurement by a ferrite yoke and from the calculation by eddy current FEM analysis. Three configurations were used to connect both ends of SiFe sheet. First one is a connection by double-welded butt. Second one is to put the sheet the same material above the confronted both ends of the sheet to avoid a leakage magnetic flux. The last one is ideally without any connection. The shield effect of the second one agreed well with the last one and showed the shield effect of -40dB.

보의 설치에 따른 하상변동과 물리적 교란평가 분석 (Analyses of Riverbed Changes and Physical Disturbance Evaluations by Weir Installation in a Reach)

  • 최흥식;이웅희
    • 대한토목학회논문집
    • /
    • 제34권4호
    • /
    • pp.1203-1213
    • /
    • 2014
  • 청미천의 일부구간을 대상으로 HEC-RAS를 이용하여 보의 설치 유무에 따른 수리 및 하상변동 특성을 분석하였다. 한국수자원공사(2008)에서 제시한 방법을 이용하여 물리적 교란을 평가하였다. 보의 설치에 따른 하상변동이 큰 구간에서의 물리적 교란점수는 낮게 나타났다. 보의 설치에 따른 하상변동과 그에 따른 물리적 교란영향 범위는 거의 일치하여 하상변동은 하천에서 물리적 교란을 야기하는 중요한 인자임을 확인하였다. 기존 보에 의한 교란의 영향이 없는 상류와 하류 지점에 추가적인 보를 설치할 때는 일정구간에 보의 설치 이전과 유사한 교란점수로 나타나 추가적인 하천교란이 발생하지 않았다. 교란의 영향범위 상류와 하류의 끝단에 추가적인 보를 설치한 경우 전 구간에 걸쳐 교란의 영향 나타났다. 물리적 교란 영향범위가 중첩되도록 상류와 하류에 추가적인 보를 설치한 경우 물리적 교란양상의 중첩으로 전 구간의 교란점수는 매우 낮게 나타났다. 따라서 하천에서 보의 설치는 하상변동과 교란의 영향범위보다 충분히 떨어진 위치에 설치할 때 하천의 물리적 교란을 최소화할 수 있다.

온도에 따른 D.C. 저압방전의 전기적 특성해석 (Analysis of electrical Charactersitics by the effect of ambient temperature in D.C. low-pressure discharge)

  • 김수길;이진우;지철근
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1990년도 추계학술발표회논문집
    • /
    • pp.13-16
    • /
    • 1990
  • 균일한 positive column의 상세한 이론이 충돌 단면적 곡선과 공진 방사 그리고 다단계 여기(multistage)와 이온화 과정을 고려하여 0.5에서 5mmHg 압력에서 수은과 희유가스(rare-gas)가 혼합되어 있는 D.C.형광 램프 방전에 대해 전개된다. 온도와 이온, 비여기원자, 여기원자의 밀도가 수치해석에 의하여 계산된다.

  • PDF

현장에 타설된 연직배수재의 통수능력 분석 (Analysis on the Discharge Capacity of Vertical Drains Installed in the Field)

  • 박영목;진규남;정하익;정길수
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 봄 학술발표회 논문집
    • /
    • pp.512-519
    • /
    • 2000
  • The discharge capacity of vertical drains installed in the field is reduced with time elapsed after installation due to deformation of drains and clogging effect. Discharge capacity of two types of vertical drains was analysed about three years after installation in the subsoil. Discharge capacity of two types of vertical drains were measured by small, middle, and large scale test apparatus. The results indicate that the discharge capacity of vertical drains after three years operation dramatically decreased compare to the initial discharge capacity.

  • PDF

먼지의 첨가에 따른 절편유의 대전경향 (Electrification tendency of oil adding dust)

  • 곽희로;김두석;권동진;조국희
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 1992년도 추계학술발표회논문집
    • /
    • pp.60-63
    • /
    • 1992
  • This paper presents the effect of moisture and dust on streaming electrification in transformer oil, in order to investigate the electrification tendency of oil adding moisture and dost. Authors designed series electrification device to analyse streaming electrification phenomena easily. Experimental results show that adding of moisture and dust in oil decreased charging level and it was dominant in case of moisture.

  • PDF

상이한 보호방식의 전차선로에서 고장전류 해석 (Computation of Current Distribution at AT Fed Electrified Railway with Mixed Grounding Systems)

  • 정선호
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2002년도 학술대회논문집
    • /
    • pp.343-347
    • /
    • 2002
  • This paper analyzed the effect of breakdown electric current and it establishes a countermeasure that objective of the place where it put when with protection method which is applied from the existing electric railroad power supply system and where the protection method which is applied in the newly electrified system. Will reach and in order to attain simulation it did a actual power supply system and it analyzed that result.

  • PDF

수분 및 머지의 첨가에 따른 절연유의 대전경향 (Electrification Tendency of Oil Adding Moisture and Dust)

  • 김두석;권동진;강창구
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제6권5호
    • /
    • pp.50-56
    • /
    • 1992
  • This paper presents the effect of moisture and dust on streaming electrification in transformer oil, in order to investigate the electrification tendency of oil adding moisture an dust. Authors designed series electrification device to analyse streaming electrification phenomena easily. Experimental results show that the streaming current is linearly increased with oil velocity and it has a peak value at about a 50 [%]. Adding of moisture and dust in oil decreased charging level and it was dominant in case of moisture.

  • PDF