• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.82-88
• /
• 2000

In this paper, We present a low cost auxiliary circuit of $S^4-PFC$converter with the feedback winding, which can improve the input current waveform with the maintenance of limited DC Bus Voltage and high efficiency. The converter with feedback winding was analyzed to demonstrate the proposed converter. Int order to verify the performance of the proposed converter, we designed the converter which operates at the output of 5[V], 65[W] and switching frequency of 100[kHz] within the universal line voltage. Implemented converter has decreased line current peak value by 50[%] compared with the conventional converters and the power utilization was increased in the line period.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.5
• /
• pp.55-60
• /
• 2001

Most of the battery charger for electric powered forklift truck are controlled by the method of 3-phased constant current and constant voltage controls. However, these chargers have several disadvantages like a large charger capacity, and a short battery life time. To eliminate the weak points, a digital type battery charger based on multi-mode control adding a constant power control and several assistant controls in the conventional control is presented. The whole control system is performed by a low cost 8 bit one-chip micro-controller and completely digitize. So, we can get a high precision control and a good reliability.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1400-1401
• /
• 2011

RPS(Renewable Portfolio Standard) recently with the introduction of a new solar power development as the market expands, land shortage of solar power as an alternative site for installing solar water development has emerged. Solar water dams, reservoirs and water by taking advantage of available solar power development a new concept of private forest land in a way does not involve destruction of the forest land and water resources through efficient use of environmentally friendly energy production and water quality improvement There are a variety of benefits. This paper won the nation's first solar power to enforce the selection of the optimal location for solar power's award for planning theory and research techniques are intended to establish. Award of the solar system through the analysis of a few research-related materials and renewable energy systems project implementation process to establish an initial investigation techniques as well as the existing dam located about fitness will be assessed. In this study, solar water conducting business in the current analysis with considerable planning and installation of solar installation for the economic and environmental cost of the evaluation period and is expected to be able to give you one.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.2
• /
• pp.53-60
• /
• 2011

The available power generated from the FC power plant may not be sufficient to meet sustained load demand, peak demand or transient events. An supercapacitor bank(SCB) can supply a large burst of power, but it cannot store a significant amount of energy. The combined use of FC and SCB has the potential for the better energy efficiency, reducing the cost of FC technology and improved dynamic response. In this paper, A single PEMFC and PEMFC operated in parallel with a SC bank are presented, A new dynamic model of PEMFC system, the converter and controller has been developed for stand-alone applications. The simulation results are presented using Matlab/Simulink, and SimPowerSystems environments. It is confirmed that the results show a good performance and stable DC-link voltage for proposed dynamic and mathematical models developed for the combined FC/SCB.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.75-82
• /
• 2002

This paper propose a new mathematical modelling method about optimum operational schedule for cogeneration systems. Proposed algorithm solving the energy product cost function in this paper is very similar to the real model that is, proposed algorithm solve nonlinear type of real model using mixed integer programming based on the piecewise linear function while the conventional algorithms used before could not solve that kind of problems. The effectiveness of the proposed method is ascertained by the simulation results with varius case studies which are similar to real operation circumstances.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.85-92
• /
• 2014

Offshore fields are increasingly important for the development of offshore resources due to the growing energy needs. However, an offshore field for oil and gas production has difficult development conditions, e.g., high temperature, high pressure, sweet/sour compositions of fluids, etc. Corrosion is one of the biggest issues for offshore pipeline engineering. In this study, a Corrosion Resistant Alloy (CRA) pipe for corrosion prevention was investigated through its global demand and trends, and three types of CRA pipelines were introduced with detailed explanations. The usefulness of CRA was also evaluated in comparison to a carbon steel pipeline in terms of the structural strength, cost, and other factors. Offshore pipeline engineering, including mechanical design and verification of the results through an installation analysis based on numerical software, was performed for the carbon steel type and solid CRA type. The results obtained from this study will be useful data for CRA pipeline designers and researchers.

• IE interfaces
• /
• v.13 no.3
• /
• pp.444-454
• /
• 2000

Due to the improvement of modern information technologies, sharing stock information among the supply chain members is a common practice nowadays. Many companies are planning to adopt the information systems to possess the real-time shared stock information. Thus, it is needed to quantify the value of shared stock information. The purpose of this paper is to evaluate the value of the shared stock information for two-echelon distribution systems. Existing reorder policies can be classified into installation stock policies and echelon stock policies. Since installation stock policies do not utilize the shared stock information, and both classes of policies may show poor performances for distribution systems, we cannot evaluate the value of the shared stock information with the existing policies. Thus, we provide a new type of reorder policy, named order risk policy. We define the order risk using marginal analysis, and prove the optimality. Through computational experiment that compares the order risk policy with the existing policies, it is shown that a significant cost reduction is achieved with the effective utilization of the shared stock information. We also show the effect of the system characteristics on the value of the shared stock information.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.4
• /
• pp.344-351
• /
• 2015

Recently, an ERP (Enterprise resource Planning) system has been becoming an essential S/W tool for companies to manage their business processes and manufacturing resources. As the information exchange becomes more complex, not only corporate companies but also small- and mid- sized enterprises (SMEs) are required to build an ERP system. However, for small- and middle- sized companies, the adoption of ERP systems becomes challenging due to high cost and long installation time of the system. This paper presents a novel concept of an adaptive ERP system incorporating the ontology structure of the business supply chain information. The proposed ERP installation methodology is illustrated with an example of a door-trim manufacturing company in the automotive supply chain.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.355-361
• /
• 2002

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system. Integration of this requires open network with for the standard communication protocol and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the open distributed fire alarm signaling system for the integration of BAS, a new intelligent control modules with LonTalk protocol and a new control modules for power line communication. Newly proposed additions to LonWorks network make it very well suited for integrating fire systems with other building automation sub-systems and another BAS with low cost. Additionally, it is very important that best design practices, test procedures and building codes need to be modernized to accommodate integrated building systems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.22-27
• /
• 2004

The gas discharge AND gate which have been newly proposed is applied to three electrode surface discharge AC PDP. The address discharge characteristics by the DC-AC floating discharge by which Y electrode is made floating electrode is analyzed The address discharge can be begun by using the floating discharge from the experiment result Moreover, the display discharge can be sustained. The DC priming discharge that the floating discharge is matched to timing is generated in a supplementary electrode. As a result, space charge is supplied enough to the space of the floating discharge and the data voltage is lowered up to l00(V). Driving method to use this DC-AC floating discharge is able to obtain the address operation margin of l00(V).