• 제목/요약/키워드: Inspection Error

검색결과 475건 처리시간 0.022초

Seismic vulnerability assessment of composite reinforced concrete-masonry building

  • Remki, Mustapha;kehila, Fouad;Bechtoula, Hakim;Bourzam, Abdelkrim
    • Earthquakes and Structures
    • /
    • 제11권2호
    • /
    • pp.371-386
    • /
    • 2016
  • During the last decades, many destructive earthquakes occurred in Algeria, particularly in the northern part of the country (Chlef (1980), Constantine (1985), Tipaza (1989), Mascara (1994), Ain-Benian (1996), Ain Temouchent (1999), Beni Ourtilane (2000), and recently $Boumerd{\acute{e}}s$ (2003), causing enormous losses in human lives, buildings and equipments. In order to reduce this risk and avoid serious damages to the strategic existing buildings, the authorities of the country, aware of this risk and in order to have the necessary elements that let them to know and estimate the potential losses in advance, with an acceptable error, and to take the necessary countermeasures, decided to invest into seismic upgrade, strengthening and retrofitting of those buildings. To do so, seismic vulnerability study of this category of buildings has been considered. Structural analysis is performed based on the site investigation (inspection of the building, collecting data, materials characteristics, general conditions of the building, etc.), and existing drawings (architectural plans, structural design, etc.). The aim of these seismic vulnerability studies is to develop guidelines and a methodology for rehabilitation of existing buildings. This paper presents the methodology, based on non linear and seismic analysis of existing buildings, followed in this study and summarizes the vulnerability assessment and strengthening of one of the strategic buildings according to the new Algerian code RPA 99/version 2003. As a direct application of this methodology, both, static equivalent method and non linear dynamic analysis, of composite concrete masonry existing building in the city of "CONSTANTINE", located in the east side of ALGERIA, are presented in this paper.

퍼지추론을 이용한 저항 점용접부위의 품질평가 알고리듬 (Quality assurance algorithm using fuzzy reasoning for resistance spot weldings)

  • 김주석;이재익;이상룡
    • 대한기계학회논문집A
    • /
    • 제22권3호
    • /
    • pp.644-653
    • /
    • 1998
  • In resistance spot weld, the assurance of weld quality has been a long-standing problem. Since the weld nuggets if resustance spot welding form between the workpieces, visual detection of defects in usually impossible. Welding quality of resistance spot welding can be verified by non destructive and destructive inspections such as X-Ray inspection and testing of weld strength. But these tests, in addition to being time-consuming and costly, can entail risks due to sampling basis. The purpose of this study is the development of the monitoring system based on fuzzy inference, aimed at diagonosis of quality in resistance spot welding. The fuzzy inference system consists of fuzzy input variables, fuzzy membership functions and fuzzy rules. For inferring the welding quality(strength), the experimental data of the spot welding were acquired in various welding conditions with the monitoring system designed. Some fuzzy input variables-maximum, slop and difference values of electrode movement signals-were extracted from the experimental data. It was confirmed that the fuzzy inference values of strength have a .${\pm}$5% error in comparison with actual values for the selected welding conditions(9-10.5KA, 10-14 cycle, 250-300 $kg_f$). This monitoring system can be useful in improving the quality assurance and reliability of the resistance spot welding process.

공간DB엔진(SDE)을 이용한 수치임상도 운영·관리 프로그램 개발(Revision 1.0) (Development of the Program for Operating & Managing Digital Forest Cover Type Map Using SDE(Revision 1.0))

  • 유병오;서수안;류주형
    • 한국지리정보학회지
    • /
    • 제14권3호
    • /
    • pp.1-10
    • /
    • 2011
  • 본 프로그램 개발의 목적은 기존의 아날로그 형태의 제작과정 및 공정 그리고 방대한 자료 관리의 문제점들을 해결하기 위해 SDE(spatial database engine) 라는 공간DB엔진을 이용하여 대량의 임상도를 운영 관리하는데 있다. 이를 위해 공간DB검색, 작업내용 및 진도파악, 인접 도엽간 검정/편집, 완료 도엽의 승인 및 반려 기능 등을 구현하여 일관된 운영 관리 표준화 공정을 확립하였다. 향후 본 프로그램을 활용하여 효율적인 임상도 제작과 대량의 임상도 보급이 가능할 것이며, 이에 따른 시간 및 비용을 절감할 수 있을 것으로 기대된다.

광픽업 스캔 장치를 이용한 미소 구조물의 표면 측정 (Surface Measurement of Microstructures Using Optical Pick-up Based Scanner)

  • 김재현;박정열;이승엽
    • 대한기계학회논문집B
    • /
    • 제34권1호
    • /
    • pp.73-76
    • /
    • 2010
  • MEMS 기술이 발전함에 따라 MEMS 공정으로 제작된 미소 구조물들의 검사 및 특성 분석이 매우 중요한 문제로 떠오르고 있다. 그러나 주사 전자현미경(SEM)이나 원자현미경(AFM) 그리고 기계적 표면측정장치 등은 가격적인 측면에서나 방법적인 측면에서 많은 단점을 안고 있다. 본 논문에서는 DVD 광 픽업 장치를 이용하여 미소구조물을 높이를 측정하였다. 미소구조물 시편에서 반사된 빛의 강도를 측정하여 시편의 영상을 만들어냈고 미소구조물의 높이는 포토다이오드에서 측정된 포커스에러신호(FES)을 통해 구할 수 있었다. 제시된 광 픽업 스캐너는 기존 측정 장치와 비교하여 저렴한 비용으로 정밀한 측정이 가능함을 보여주었고, 기존의 기술을 대체할 수 있는 시스템으로 사용될 수 있을 것이다.

스트레치소재(素材) 의류제품(衣類製品)의 생산실태(生産實態) 연구(硏究)(II) (A Study on the Conditions of Apparel Products of Stretch Material (II))

  • 박진영;손희순
    • 패션비즈니스
    • /
    • 제2권2호
    • /
    • pp.77-84
    • /
    • 1998
  • As a result of surveying the process for sewing, the problems involving the outlook of sewn apparels were error off the standard dimensions and uneven sizes, which verifies the need for urgent technological guidance and development. On the other hand, the majority of the businesses were operating their sewing machines at the speed of 2,000 rpm or higher. Such a conventional working method may not well reflect the properties of the stretch fabrics, causing poorer quality products. Moreover, most of the businesses were using the ball-point needles which should be replaced with appropriate ones for stretch fabric. The types of feed dog which were used most were Drop feed, Union feed, Confound feed, Differential feed in their oder. Anyway, the automatized dog should urgently replace these inefficient ones for stretch fabric. Meanwhile, the types of presser foot which were used most were Plain foot, Teflon foot, Roller foot, Ring foot in their order, which also necessitates their replacement which Teflon foot. 2. As a result of surveying the process for finishing and inspection, while the causes scores less than 3 points, those due to pressers scored more than 3 points. This results suggests that a technological guidance is needed for the pressing work. Lastly, the causes of defect due to poor outlook attributable to such notions as button or zipper and those due to the uneven sizes scored more than 3 points, which suggests that the entire of needle works should be reformed through scientific research and technological guidance.

  • PDF

동영상을 이용한 부유구조물 모형의 변위 관측 (Displacement Measurement of a Floating Structure Model Using a Video Data)

  • 한동엽;김현우;김재민
    • 한국측량학회지
    • /
    • 제31권2호
    • /
    • pp.159-164
    • /
    • 2013
  • 움직이는 한 개의 카메라 동영상으로부터 개체의 3차원 위치를 추출할 수 있다고 알려져 있다. 이로부터 캠코더 측정시스템을 이용하여 부유체 모형에 대한 영상기반 모니터링을 수행하였다. 규칙파 및 비규칙파 실험조건에서의 디지털 캠코더 동영상으로부터 프레임 영상을 추출하고, 특징점을 정합하여, 상대적인 3차원 좌표를 획득하였다. 수정된 SURF 기반 정합의 영상 변환 정확도와 규칙파에서 부유체 모델의 영상기반 변위 관측 정확도를 평가하였다. 규칙파의 경우 조파기의 설정값은 3.0sec이고, 영상기반 변위에 의한 주기는 2.993sec이었다. 기계적 오차를 고려할 때 이 두 값은 유사한 결과로 여겨진다. 시각적으로도 X Y Z축으로의 1차원 투영결과나 3차원 공간에서의 결과에서 규칙파의 형상을 볼 수 있었다. 결과적으로 30fps의 일반 디지털 캠코더 동영상을 이용하여 근실시간으로 위치변동을 계산할 수 있었다.

형태학적 워터쉐드 알고리즘을 이용한 효율적인 영상분할 (Efficient Image Segmentation Using Morphological Watershed Algorithm)

  • 김영우;임재영;이원열;김세윤;임동훈
    • 응용통계연구
    • /
    • 제22권4호
    • /
    • pp.709-721
    • /
    • 2009
  • 본 논문은 형태학적 워터쉐드 알고리즘을 이용하여 잡음에 강한 효율적인 영상분할에 대해서 논의하고자 한다. 기존의 형태학적 워터쉐드 알고리즘에 의한 영상분할은 크게 형태학적 연산자에 의한 영상의 단순화, 경사 영상 생성, 워터쉐드 알고리즘 수행 그리고 영역 병합 등의 여러 단계에 걸쳐 이루어진다. 그러나 기존의 형태학적 워터쉐드 알고리즘에 의한 영상분할은 과분할이 많이 일어나는 단점을 갖고 있다. 본 논문에서는 과분할을 줄이기 위해 잡음에 강한 형태학적 연산자에 의한 경사영상을 생성하고 워터쉐드 알고리즘을 적용 후 통계적인 콜모고로프-스미르노프 검정을 사용하여 인접한 영역 간의 픽셀 값 분포를 비교함으로써 부적절한 영역 병합을 최소화하였다. 본 논문에서 제안한 영상분할의 성능을 평가하기 위해 기존의 방법과 정성적이고 정량적인 비교뿐 만아니라 영상분할에 소요되는 계산시간까지 비교하였다.

백색광 간섭계를 이용한 안구 돌출 값 측정 (Exophthalmometric values using White-light Scanning Interferometer)

  • 장중수;김영길
    • 한국정보통신학회논문지
    • /
    • 제21권12호
    • /
    • pp.2341-2346
    • /
    • 2017
  • 안와 내에서 안구의 상대적 위치는 여러 병적인 상태를 짐작할 수 있는 하나의 기준이 될 수 있다. 특히 안와골절, 갑상선 안질환, 안와 종양 등의 진단과 이에 약물 및 수술적 치료의 결과를 판단하는데 유용하다. 현재 안구 돌출 값을 측정하기 위해 주로 사용되는 대표적 측정 기기인 Hertel과 Naugle 안구돌출계 등은 검사자가 다를 경우, 같은 검사자가 반복적으로 측정하더라도 검사할 때마다 안와의 고정부위가 달라지는 등 측정자에 의한 오차가 필연적이다. 또한 동일한 안구 돌출 계라고 하더라도 제조 회사가 다르다면 안와의 고정부위 디자인이 달라 검사자에의한 측정 오차가 발생한다. 본 논문에서는 안구돌출값의 측정을 3차원 영상 측정기술인 백색광 간섭계를 이용하여 검사 정밀도 및 반복 정도를 크게 올릴 수 있는 자동 측정 방법에 대한 연구를 제안하고자 한다.

원형튜브 단면형상검사용 와전류탐촉자 개발 (Development of Eddy Current Test Probe for Profilometry Inspection of Tube)

  • 이희종;남민우;이진황
    • 비파괴검사학회지
    • /
    • 제17권4호
    • /
    • pp.262-269
    • /
    • 1997
  • 발전 설비중 열교환기 튜브와 같이 단면 형상이 원형인 부품의 원주 방향으로 마모, 침식 등에 의해 발생할 수 있는 단면 형상 변화를 검사(profilometry)하기 위한 와전류 탐촉자를 임피던스 등가회로이론을 적용하여 개발하였다. 본 연구에서는 외경 9.68mm, 벽두께 0.47mm인 SS304 튜브 외부에 발생할 수 있는 마모, denting 등의 결함을 모의한 시편을 제작하여 실험을 통해 검출 감도와 S/N비가 최적인 탐촉자의 코일치수, 전기적 특성, 적용 시험 주파수 등을 설정하였다. 이 결과에 따라 단면 형상 검사용 $8{\times}1$ 다중표면 탐촉자를 설계 제작하여 모의시편의 각 결함별 마모율을 검사한 결과 튜브 외부 발생 단면 형상 변화를 튜브외경의 ${\pm}0.2%$ (0.022mm) 측정 오차 범위로 측정이 가능함을 확인하였다.

  • PDF

GPS-IMU 통합 시스템을 이용한 도로기하구조 측정에 관한 연구 (The Measurement of Road Alignment Using GPS-IMU System)

  • 박재홍;윤덕근;성정곤;이준석
    • 대한교통학회지
    • /
    • 제30권5호
    • /
    • pp.61-69
    • /
    • 2012
  • 도로기하구조정보는 도로의 유지관리와 안전성 평가 등에 중요한 요소로써, 정보를 취득하려는 구간에 대한 정확한 기하구조정보를 취득하는 작업은 중요하다. 그러나, 도면이 부재하거나 선형의 결함이 발생하는 구간에서는 정확한 자료를 수집하는데 한계가 존재한다. 따라서, 이러한 구간에 도면정보를 신속하게 취득하기 위해 본 연구에서는 GPS-IMU 통합시스템이 장착된 차량에서 취득된 자료를 이용하여 도로기하구조를 측정하였다. 연구결과, 정확도의 기준이 되는 도면 값과 평면선형은 3.38%의 오차율이 나타났으며, 종단선형은 0.083의 절대값 오차가 나타났다. 따라서, 본 연구에서 도출된 결과는 도로안전점검 및 진단과 같은 도로관리업무에 활용될 목적으로 적용이 가능한 것으로 판단된다.