• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마
• /
• pp.74-77
• /
• 2000

The main objective of this paper is to design and test a new type of polymer ZnO surge arrester for AC power system of railroad vehicles. Metal oxide surge arrester for most electric power system applications, electric train and must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. When breakdown of ZnO elements in a surge arrester occurs due to flashover, fault short current flows through the arrester and internal pressure of the arrester rises. The pressure rise can usually be limited by fitting a pressure relief diaphragm and transferring the arc from the inside to the outside of the housing. However, there is possibility of porcelain fragmentation caused by the thermal shock. pressure rise, etc. Non-fragmenting of the housing is the most desired way to prevent damage to other equipment. The pressure change which is occurred by flashover become discharge energy. This discharge energy raises to damage arrester housing and arrester housing is dispersed as small fragment. Therefore, the pressure relief design is requested to obstruct housing dispersion. The main research works are focused on the structure design by finite element method, pressure relief of module, and studies of performance of surge arrester for electric railway vehicle.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1104-1113
• /
• 2007

최근 초고속 네트워크 인프라가 빠른 속도로 발전하고 PDA, 핸드폰 등 무선 단말의 사용이 증대됨에 따라 이들 유 무선 망을 통합하고 연동하는 다양한 응용 서비스가 대두되고 있다. 또한 기존의 가전기기들이 디지털화 되고 네트워크로 연동됨으로써 인터넷 정보가전기기로 진화되고 있다. 따라서 이들 기기들을 댁내에서 이더넷, 전력선, 전화선 및 IEEE1394로 연결함으로써 기기들 상호 간에 데이터 전송과 공유를 가능케 하여 다양한 서비스를 제공하고자 하는 홈 네트워크의 구축이 활발히 진행되고 있다. 그리고 홈 네트워크와 초고속 네트워크 인프라를 연동하여 인터넷상에서 정보가전기기들을 제어하고 모니터링 하는 인터넷 정보가전에 관한 연구가 활발히 진행되고 있다. 본 논문에서는 효과적으로 유 무선 통신망을 결합하여 댁내 외에서 홈 네트워크로 연결된 각 정보가전기기들에 접근하고 제어하는 무선 통합 홈 서버를 설계 구축한다. 또한 정보가전기기 시뮬레이터를 만들어 실제 동작을 테스트해 본다.

• 한국가스학회지
• /
• 제20권1호
• /
• pp.29-39
• /
• 2016

폭발성 가스가 존재하는 위험장소에서 사용하는 전기기기는 폭발성 가스의 점화원이 되지 않도록 설계되어야 한다. 내압방폭 구조의 설계는 전기 스파크를 발생시키는 부품을 가진 용기가 내부에서 가스나 증기의 폭발시 최대 압력에 견디고 내부 화염이 외부 가스나 증기 폭발로 전파되지 않도록 설계되어야 한다. 이 논문은 화염 틈새를 통해 외부로 분사되는 연소 생성물의 분사가 외부 가스나 증기를 점화시킬 정도의 온도나 에너지를 가질 수 없도록 하는 MESG(Maximum Experimental Safe Gap)의 중요한 물리적인 메커니즘에 대해 설명하였다. IEC 60079-20-1:2010 기준에 의해 프로판과 아세틸렌의 MESG를 실험하여 MESG 값을 측정하고 가스폭발시의 최대 폭발압력을 측정하였다. 결과로는 최소 MESG가 측정될 때 가스의 농도는 화학당량 농도보다 높고 폭발압력은 최소 MESG에서 가장 높게 나타났다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권6호
• /
• pp.519-527
• /
• 1997

The micro crack was occurred where the stress concentrated by the thermal stress which was induced during the cooling period after molding process or by the various reliability tests. In order to estimate the possibility of development from inside micro crack to outside fracture, the fracture toughness of EMC should be measured under the various applicable condition. But study was conducted very rarely for the above area. In order to provide a was to decide the fracture resistance of EMC (Epoxy Molding Compound) of plastic package which is produced by using transfer molding method, measuring fracture is studied. The specimens were made with various EMC material. The diverse combination of test conditions, such as different temperature, temperature /humidity conditions, different filler shapes, and post cure treatment, were tried to examine the effects of environmental condition on the fracture toughness. This study proposed a way which could improve the reliability of LOC(Lead On Chip) type package by comparing the measured $J_{IC}$ of EMC and the calculated J-integral value from FEM(Finite Element Method). The measured $K_{IC}$ value of EMC above glass transition temperature dropped sharply as the temperature increased. The $K_{IC}$ was observed to be higher before the post cure treatment than after the post cure treatment. The change of $J_{IC}$ was significant by time change. J-integral was calculated to have maximum value the angle of the direction of fracture at the lead tip was 0 degree in SOJ package and -30 degree in TSOP package. The results FEM simulation were well agreed with the results of measurement within 5% tolerance. The package crack was proved to be affected more by the structure than by the composing material of package. The structure and the composing material are the variables to reduce the package crack.ack.

• 대한금속재료학회지
• /
• 제48권8호
• /
• pp.691-698
• /
• 2010

A study has been carried out to evaluate the interaction behavior between a lanthanide element and clad material in order to analyze the effect of the lanthanide element on the fuel cladding chemical interaction (FCCI). A diffusion couple test between Misch metal (70Ce-30La) and ferritic-martensitic steel (Gr.92) was performed at $660^{\circ}C$, followed by a microstructural analysis of the coupled sample. The results showed that Ce in the Misch metal, rather than La, reacted with the ferritic-martensitic steel (FMS) to form an interaction layer that penetrated the clad thickness. Fe diffused outside the clad interface to form an $Fe_2Ce$ compound, leaving a depletion of Fe caused by excess diffusion as well as by the formation of Cr-rich precipitation inside the interaction layer. The rate of growth followed the cubic rate law, which indicated that Fe depletion was caused by the diffusion of Fe and that the associated Cr-rich phase formation controlled the whole diffusion process.

• 한국방사선학회논문지
• /
• 제15권6호
• /
• pp.795-801
• /
• 2021

원전 해체 작업장의 요구에 따라 드론 기반 무인 원격 방사선 검출 모듈을 개발하였다. 사람이 접근해서 방사선을 측정할 수 없는 원자력 발전소 격납용기 내부 상공 및 외부로 누설되는 방사선 측정을 위한 목적으로 저준위에 민감한 GM-tube를 사용하여 제작하였다. 드론 기반 방사선 검출 모듈의 무게는 200g 미만으로 원자력 발전소 격납용기 내부의 상공과 외부 공중에서도 운용이 가능하다. 설계된 장비의 성능 확인을 위해 국제 기준 (IEC60864)을 참고하여 성능평가 실험을 시행하였다. 현장의 요구에 맞게 설계된 방사선 검출 모듈의 안정성은 측정 정확도를 평가하기 위한 변동률 실험에서 반복 측정에 의한 통계적 변동률은 ±4.6%. 선량률 의존성을 평가하기 위한 선형성 실험에서 정확도 ± 7.3%, 전체 선형도는 ± 3.5%이며 성능평가를 위한 국제기준을 만족하였다. 본 연구에서 개발한 무인 원격 방사선 검출 모듈은 원전 해체 작업장 맞춤형 장비로, 방사선 분진이 많은 현장에서 정확한 공간선량률의 측정과 방사선 작업장 안전관리에 도움을 줄 수 있을 것으로 확신한다.

• 한국물환경학회지
• /
• 제20권2호
• /
• pp.163-169
• /
• 2004

Feasibility of using PE sheet laminated CSP(Corrugated steel pipe) to sewers were tested via corrosion and abrasion tests for PE sheet laminated CSP; 1) corrosion test for PE film and PE coated plate, 2) corrosion test for joint of PE sheet laminated CSP, 3) corrosion test for outside of PE sheet laminated CSP, and 4) abrasion test for inside of PE sheet laminated CSP. The results for the corrosion and abrasion tests are as follows. 1. Results for corrosion tests on PE films and zinc coated steel plates that were coated with PE films show that the surfaces of both PE were not changed compared to those of original PE samples. Furthermore, PE films maintained strong adhesion on the steel plates even though they were exposed to sewage and seawater provided cutting planes of the steel plates were treated with molding. But, results for corrosion tests on the spots that were previously cut off by a knife and a cutting planes of the steel plates were treated without molding show that steel plates have been corroded if they were exposed to sewage and seawater. 2. Results for corrosion tests on joints of PE sheet laminated corrugated steel using sewage show that gathering rust was observed at cutting plane of PE sheet laminated corrugated steel after 180 days, but PE film was not flaked off. However, PE film at cutting plane was flaked off when PE sheet laminated corrugated steel was exposed to seawater. Furthermore, flaking process was severely progressed at lockseam points of which the surfaces were not smooth. 3. Results for laying PE sheet laminated corrugated steel under the ground show that the surface of untouched PE film was almost identical to that of original PE film. However, the spots that were previously cut off by a knife and a cutting plane of PE sheet laminated corrugated steel have flaked off. 4. As a result of abrasion tests conducted with PE sheet laminated corrugated steel and sand, brilliance and thickness of PE was not greatly changed under the severe abrasion conditions. Therefore, the durability of PE sheet laminated corrugated steel for abrasion was determined to be good.

• 콘크리트학회논문집
• /
• 제27권4호
• /
• pp.419-426
• /
• 2015

본 연구는 지하식 LNG 저장탱크의 시공에 앞서 연약지반의 개량을 위하여 현장 원위치의 흙과 시멘트, 벤토나이트 등을 사용하는 소일-시멘트 연속벽체를 효과적으로 시공하는 SMW 공법에 대한 배합설계 및 현장적용 사례를 실험적으로 규명하기 위한 것이다. 현장조건을 고려하여, 보통 포틀랜드 시멘트와 벤토나이트를 주재료로 선정하였고, 흙의 단위용적중량은 $1,833kg/m^3$을 적용하였으며, 이에 따른 물-시멘트비 4종류와 배합속도 3수준을 대상으로 블리딩 및 압축강도 실험을 실시하였다. 실험은 실내실험 및 현장적용 사례로 나누어 수행되었으며, 실험을 통하여 얻은 결론은 다음과 같다. (1) 물-시멘트비가 감소할수록, 배합속도(rpm)이 증가할수록, 블리딩량 및 블리딩율이 감소하는 것으로 나타났다. (2) 물-시멘트비 150% 이하에서 현장적용강도(1.5 MPa)를 만족하였으며, 현장 코아강도는 공시체 강도에 비해 8~23% 증가하였다. 따라서 적용현장 조건을 고려하여 단위시멘트량 $280kg/m^3$, 벤토나이트 $10kg/m^3$, 물-시멘트비 150%, 그리고 배합속도 90 rpm을 현장시공의 최적배합으로 제안하였으며, 현장적용 사례의 실험결과로부터 요구되는 성능을 만족하였다.

• 콘크리트학회논문집
• /
• 제15권4호
• /
• pp.541-548
• /
• 2003

본 연구는 내한촉진제를 사용한 콘크리트의 현장 적용성을 알아보기 위한 기초적인 실험으로서, 실물부재시험을 통해 각종 양생방법에 따른 온도이력 및 강도특성을 검토하고 한중콘크리트에서 실구조물과 동일한 강도이력을 가질 수 있도록 강도관리용 공시체의 적정 양생방법을 평가하기 위한 것이다. 실물부재시험에서 양생방법에 따른 온도이력은 일반콘크리트(단열양생), 일반콘크리트(급열양생), 내한촉진제 콘크리트 및 일반콘크리트(양생막 양생) 순으로 크게 저하하는 경향을 보이고 있었다. 강도특성은 양생조건이 열악한 양생막 내 외부에서의 일반콘크리트 공시체의 경우에는 초기동해에 따른 강도발현 저하를 보인 반면에 내한촉진제 콘크리트의 경우에는 재령이 경과할수록 계속적인 강도발현을 보이고 있어 내한촉진제의 사용에 따른 동결온도 저하효과 및 저온환경하에서의 경화촉진효과를 나타내고 있었다. 한중콘크리트의 강도관리용 공시체의 적정 양생방법을 검토한 결과, 부재 내부에 매립하여 양생한 경우 및 간이단열양생을 실시한 경우에 있어서의 구조체 콘크리트와의 온도이력은 다소 차이를 나타내고 있지만, 코어강도와는 비교적 근사하게 나타나고 있어 구조체 강도평가를 위한 이들 양생방법의 유효성을 확인할 수 있었다.

• 한국농공학회지
• /
• 제29권4호
• /
• pp.59-72
• /
• 1987

Although long-term runoff analysis is important as much as flood analysis in the design of water works, the technological level of the former is relatively lower than that of the latter. In this respect, the precise estimation model for the volume of successive runoff should he developed as soon as possible. Up to now, in Korea, Gajiyama's formula has been widely used in long-term runoff analysis, which has many problems in applying in real situation. On the other hand, in flood analysis, unit hydrograph method has been exclusively used. Therefore, this study aims at trying to apply unit hydrograph method in long-term runoff analysis for the betterment of its estimation. Four test catchment areas were selected ; Maesan area in Namlum river as a representative area of Han river system, Cheongju area in Musim river as one of Geum river system, Hwasun area in Hwasun river as one of Yongsan river system, and Supyung area in Geum river as one of Nakdong river system. In the analysis of unit hydrograph, seperation of effective rainfall was carried out firstly. Considering that effective rainfall and moisture condition of catchrnent area are inside and outside of a phenomenon respectively and the latter is not considered in the analysis, Initial base flow(qb)was selected as an index of moisture condition. At the same time, basic equation(Eq.7) was established, in which qb can take a role as a parameter in relating between cumulative rainfall(P) and cumulative loss of rainfall(Ld). Based on the above equation, computer program for estimation model of qbwas seperately developed according to the range of qb, Developed model was applied to measured hydrographs and hyetographs for total 10 years in 4 test areas and effective rainfall was estimated. Estimation precision of model was checked as shown in Tab- 6 and Fig.8. In the next stage, based on the estimated effective rainfall(R) and runoff(Qd), a runoff distribution ratio was calculated for each teat area using by computerised least square method and used in making unit hydrographs in each test area. Significance of induced hydrographs was tested by checking the relative errors between estimated and measured runoff volume(Tab-9, 10). According to the results, runoff estimation error by unit hydrograph itself was merely 2 or 3 %, but other 2 or 3 % of error proved to be transferred error in the seperation of effective rainfall. In this study, special attentioning point is that, in spite of different river systems and forest conditions of test areas, standardized unit hydrographs for them have very similar curve shape, which can be explained by having similar catchinent characteristics such as stream length, catchinent area, slope, and vegetation intensity. That fact should be treated as important factor ingeneralization of unit hydrograph method.