• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.84-87
• /
• 2005

This study is aimed to compare the insertion losses of periodically folded barriers which have same folded width, depth and period of arrangement but different direction of arrangement. One is vortical to the roadside and another is parallel. The pressure levels and the insertion losses at the receiving points behind finite length barriers are measured in an anechoic room by scale model test. The measured insertion losses are compared with calculated insertion losses by 3D BEM models.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1161-1170
• /
• 2009

In this paper, dielectric, drude model and ideal metamaterial are applied to core of A-Sandwich radome and each radome is analyzed using recursive method in Ku band. The main parameters of radome performance are insertion loss, insertion phase delay and depolarization. In case of ideal metamaterial, the radome using ideal metamaterial dose not generate depolarization because insertion loss, insertion phase delay and loss for incidence angle of wave do not happened. If circular polarization wave is incident on radome with meta material, transmitted wave also keeps circular polarization. In case of the dispersive metamaterial, the performance of radome using dispersive metamaterial is better than it of radome using dielectric in a part of frequency band. From these results, it is showed that metamaterial can be applied to various radome structure.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.105-109
• /
• 2005

A compact antenna switch module for GSM/DCS dual band applications based on multilayer low temperature co-fired ceramic (LTCC) substrate is presented. Its size is $4.5{\times}3.2{\times}0.8 mm^3$ and insertion loss is lower than 1.0 dB at Rx mode and 1.2 dB at Tx mode. To verify the stability of the developed module to the process window, each block that is diplexer, LPF's and bias circuit is measured by probing method in the variation with the thickness of ceramic layer and the correlation between each block is quantified by calculating the VSWR In the mean while, two types of bias circuits -lumped and distributed - are compared. The measurement of each block and the calculation of VSWR give good information on the behavior of full module. The reaction of diplexer to the thickness is similar to those of LPF's and bias circuit, which means good relative matching and low value of VSWR, so total insertion loss is maintained in quite wide range of the thickness of ceramic layer at both band. And lumped type bias circuit has smaller insertion itself and better correspondence with other circuit than distributed stripline structure. Evaluated ceramic module adopting lumped type bias circuit has low insertion loss and wider stability region of thickness over than 6um and this can be suitable for the mass production. Stability characterization by probing method can be applied widely to the development of ceramic modules with embedded passives in them.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.8
• /
• pp.759-765
• /
• 2005

In this paper, developed isolator for gap filler is analyzed and designed using the simulation tool. Using the designed parameters, isolator is fabricated and tested in gap filler band. Temperature characteristics of isolator depend on magnet, YIG ferrite, and conductor etc. These require temperature stability and possible method of compensation for the temperature dependent effects. The temperature stabilization tries to use Ni-alloy. Developed isolator that compare with room temperature and high temperature characteristics has change fewer than 20 MHz. Implemented isolator shows more than 20 dB isolation characteristic at center frequency(2,650 MHz) and has 0.2 dB insertion loss in overall 100 MHz operating bandwidth. Return losses of input and output port are measured below -20 dB.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1675-1680
• /
• 2000

Recently the uncertainty has been made rapid progress in various fields of industry but the uncertainty measurement method of acoustical test (i.e. Insertion loss, Absorption ratio, Transmission loss etc,) hasn't been established. In this study, the uncertainty of measurement method for ducted silencers is carried out according to ISO 7235. The standard uncertainty factors are composed of sound pressure level, microphone sensitivity and pistonphone calibration in this measurement. Sound pressure level is type A evaluation of uncertainty, microphone sensitivity and pistonphone calibration are type B evaluation of uncertainty. The combined standard uncertainty is calculated by two type evaluation. The expanded uncertainty is expressed by the combined standard uncertainty multiply k value which is yield the effective degree of freedom.

• International Journal of Computer Science & Network Security
• /
• v.24 no.7
• /
• pp.118-122
• /
• 2024

The dielectric material is a basic element which impacts considerably on a microstrip structure performances. This project demonstrates how filter performances such as gain, bandwidth, return loss and insertion loss change proportionally with substrate material variation. The RT/Duroid 5880 and the FR-4 are two dielectric materials proposed as substrates of a low pass microstrip filter. The design and simulation are done on ADS software. The transmission and reflection characteristics show that the RT/ Duroid 5880 as a dielectric substrate permits to obtain better performance as compared to the FR-4 substrate.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.128-134
• /
• 2010

In this paper, a high-power 20-way stripline power divider with low insertion loss and low side lobe level is successfully designed, fabricated and measured as a feed network for an S-band linear array antenna having Dolph-Chebyshev current distribution which has a narrow beam width and very low side lobe level (SLL). The 20-way stripline power divider consists of an 8-way power divider, three 4-way power dividers and three ring hybrids. It utilizes a T-junction structure as a basic element for power dividing. Notches and modified input/output N-to-stripline transitions are used for improving insertion loss and return loss. The fabricated power divider shows insertion loss less than 0.3 ㏈ and rms phase mismatch less than 8o in the full bandwidth. A final 40-way power divider is synthesized by combining symmetrically two 20-way power dividers and is expected to have SLL over 40 dB, based on the measured results of the 20-way power divider.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1056-1064
• /
• 2010

This paper presents the approximate analysis method for the symmetric transmission line crossing the aperture in an backplane. The method of moments is used to determine the aperture impedance for the construction of the equivalent transmission line that the aperture impedance apply to the transmission line as the shunt impedance. As the results, the insertion loss increases at the specific frequency range for the impedance matching. In the case of the mismatching, we are confirmed to the insertion gain at the specific frequency. Also the horizontal length of the aperture affects to the transmission line better than vertical length. The measurement of the insertion loss is performed to verify the theoretical analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5288-5293
• /
• 2014

This paper presents the characterization of the wavelength selective switch using a LCOS display instead of a MEMS device, which is a core technology for the next generation ROADM. We constructed a five-port WSS, and examined the basic characteristics of the WSS, such as the response time, beam steering, insertion loss, and channel isolation. The response time of WSS was 11.6 mS and the beam steering characteristics of LCOS was well performed. The measured insertion loss at 40 channels in the c-band were 5.5~12.7 dB and channel isolation was 16~18 dB. Although the characteristics of LCOS-based WSS are inferior to the conventional MEMS-based WSS, it can be improved by additional experiments that secure the technology competitiveness.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1287-1293
• /
• 2008

Antenna switch module(ASM) for quad-band was developed. This module was integrated by RFIPD(RF integrated passive device) and transistor switch instead of LTCC-type device using low pass filters, diodes and passive elements in RF front end module for cellular phone. This module leads to low cost and miniaturization(The area is $5{\times}5\;mm$ and the thickness is 0.8 mm). The insertion loss and the return loss of each band were averagely measured as 1.0 dB(insertion loss), 15.1 dB(GSM/EGSM return loss) and 19 dB(DCS/PCS return loss), respectively.