• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.886-898
• /
• 2015

The design feasibility of a micro unidirectional DC transmission system based on an input-parallel output-parallel (IPOP) converter is analyzed in this paper. The system consists of two subsystems: an input-parallel output-series (IPOS) subsystem to step up the DC link voltage, and an input-series output-parallel (ISOP) subsystem to step down the output voltage. The two systems are connected through a transmission line. The challenge of the delay caused by the communication in the control system is addressed by introducing a ring communication structure, and its influence on the control system is analyzed to ensure the feasibility and required performance of the converter system under practical circumstances. Simulation and experiment results are presented to verify the effectiveness of the proposed design.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.508-514
• /
• 2005

This paper is concerned with the active vibration control of a grid structure equipped with piezoceramic sensors and actuators. The grid structure is a replica of the solar panel commonly mounted on satellites, which contains complex natural mode shapes. The multi input and multi output positive position feedback controller is considered as an active vibration controller for the grid structure. A new concept, the block-inverse technique, is proposed to cope with more modes than the number of actuators and sensors. This study also deals with the stability and the spillover effect associated with the application of the multi-input multi-output positive position feedback controller based on the block inverse technique. It was found that the theories developed in this study are capable of predicting the control system characteristics and its performance. The new multi-input multi-output positive position feedback controller was applied to the test structure using a digital signal processor and its efficacy was verified by experiments..

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1037-1044
• /
• 2005

This paper is concerned with the active vibration control of a grid structure equipped with piezoceramic sensors and actuators. The grid structure is a replica of the solar panel commonly mounted on satellites, which contains complex natural mode shapes. The multi-input and multi-output positive position feedback controller is considered as an active vibration controller for the grid structure. A new concept, the block-inverse technique, is proposed to cope with more modes than the number of actuators and sensors. This study also deals with the stability and the spillover effect associated with the application of the multi-input multi-output positive position feedback controller based on the block-inverse technique. It was found that the theories developed in this study are capable of predicting the control system characteristics and its performance. The new multi-input multi-output positive position feedback controller was applied to the test structure using a digital signal processor and its efficacy was verified by experiments.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.400-402
• /
• 2008

A new interleaved forward converter, adopting series-input parallel-output structure with a common transformer reset circuit, is proposed in this paper. Series-input structure distributes the voltage stress on switches, which makes it suitable for high input voltage application. Paralleling output stage with an interleaving technique enables the circuit handle large output current and reduces filter size. In addition, since two forward converters share one active-clamp circuit for the transformer reset, its primary structure is simplified. All these features make the proposed converter promising for high input voltage applications with high efficiency and simple structure.

• Journal of Society of Preventive Korean Medicine
• /
• v.8 no.1
• /
• pp.163-186
• /
• 2004

The purpose of this parer is to identify the input-output structure of oriental medicine and its alternative medicine industries in an inter-industry context and to estimate its forward and backward effects on macroeconomic variables such as production, employment and price level. Input-output tables released by The Bank of Korea were used as data in this research and inter-industry analysis was adopted as research methodology. The industry takes less share of production, price and trade in a Korean economy, compared with other industry. However, the industry's capability of creating value added is estimated to be well above that of other industry and that of making new employments is as more than 4 times as other industries. This result gives us policy implications that the government should enhance its subsidy policy and economic (tax) incentives for oriental medicine and its related alternative medicine industries.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.7
• /
• pp.706-717
• /
• 1991

In order to remove the assumption of full state availability which is one of the major difficulties with the practical realization of variable structure control systems,a new switching function with a dynamic structure is proposed. And the control performances of the output feedback variable structure control systems with the dynamic switching function are evaluated through simulation studies. The proposed dynamic switching function is driven by small number of measured output and input variables while conventional static switching function requires full state information. Therefore, the proposition of the dynamic swiching function makes practical implementation of output feedback variable structure control scheme possible for the systems with unmeasurable state variables, high order systems and large scale systems that the conventional variable structure control schemes with static switching function cannot be applied. In the variable structure control systems with the dynamic switching function, desired control performance can be guaranteed by proper choice of design parameters such as poles of switching function dynamic equation and switching control gains even though small number of measured output and input variables are provided as shown in simulation resuls.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.85-90
• /
• 2012

This paper presents a topology structure and control method for an input-parallel-output-series(IPOS) inverter system which is suitable for high input current, high output voltage, and high power applications. In order to ensure the normal operation of the IPOS inverter system, the control method should achieve input current sharing(ICS) and output voltage sharing(OVS) among constituent modules. Through the analysis in this paper, ICS is automatically achieved as long as OVS is controlled. The IPOS inverter system is controlled by a three-loop control system which is composed of an outer common-output voltage loop, inner current loops and voltage sharing loops. Simulation results show that this control strategy can achieve low total harmonic distortion(THD) in the system output voltage, fast dynamic response, and good output voltage sharing performance.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.105-111
• /
• 2020

In most multiple input/output systems, one input affects two or more different outputs. Therefore, there are many inconveniences in using the actual system. In order to solve this problem, a controller that makes an input signal and an output correspond 1:1 is called a decoupling controller. In this paper, I try to implement a relatively simple decoupling controller using a cross-compensator, that is, a compensator that takes an uncorresponding output as an input value. And this cross-compensator has a gain scheduler structure in order to increase the performance. In addition, this system is designed with a distributed control structure using CAN communication, so that it can be manufactured and operated in an easier way when implementing an actual experimental system. The proposed structure is applied to the modified new Arago's disk system and tested, and through this, the effectiveness is confirmed and reported.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.12
• /
• pp.19-26
• /
• 1991

In this paper, we give a structure algorithm for the synthesis problems of the nonlinear system via dynamic feedback. Using our algorithm, sufficient conditions for the input-output synthesis problems are discussed. The problems we consider in this paper include dynamic input-output decoupling input-output linearization, and immersion into a linear system.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.206-213
• /
• 2014

In this note, a new robust nonlinear output feedback variable structure controller is first systematically and generally designed for the output control of more affine uncertain nonlinear systems with mismatched uncertainties and matched disturbance. A transformed integral output feedback sliding surface with a most simple form is applied in order to remove the reaching phase problems. The closed loop exponential stability and the existence condition of the sliding mode on the integral output feedback sliding surface is investigated with a corresponding output feedback control input in Theorem 1. For practical application the continuous implementation of the control input is made by the modified saturation function. The effectiveness of the proposed controller is verified through a design example and simulation study.