• 한국정보시스템학회:학술대회논문집
• /
• 한국정보시스템학회 2002년도 추계학술대회
• /
• pp.289-312
• /
• 2002

This study suggests the Link weight analysis approach to choose input variables and an integrated model to make more accurate bankruptcy prediction model. the Link weight analysis approach is a method to choose input variables to analyze each input node's link weight which is the absolute value of link weight between an input nodes and a hidden layer. There are the weak-linked neurons elimination method, the strong-linked neurons selection method in the link weight analysis approach. The Integrated Model is a combined type adapting Bagging method that uses the average value of the four models, the optimal weak-linked-neurons elimination method, optimal strong-linked neurons selection method, decision-making tree model, and MDA. As a result, the methods suggested in this study - the optimal strong-linked neurons selection method, the optimal weak-linked neurons elimination method, and the integrated model - show much higher accuracy than MDA and decision making tree model. Especially the integrated model shows much higher accuracy than MDA and decision making tree model and shows slightly higher accuracy than the optimal weak-linked neurons elimination method and the optimal strong-linked neurons selection method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.211-216
• /
• 2001

Recently, the research for the mobile computing such as PDA, Palm PC and wearable computing related technologies is widely under development, specially for the input device. Among the mobile input methods are speech recognition, handwriting recognition and cording type. However these systems have the problems of the data input appraratus like input speed and recognition rate. This paper presents the Glove-based input device which could solve the system's data input problem. By the experimental results suggest the method of proposional input method that utilize the hand's movement is appropriate for the effective mobile input devices.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.589-594
• /
• 2007

In this paper, the optimal command input is considered in order to minimize the residual vibrations of a flexible cantilever beam when the beam simply changes its position by translation or rotation. Although a cantilever beam has many modes of vibration, it is shown that the consideration of the first mode is sufficient in this case. Thus, the problem becomes a singledegree-of-freedom system subjected to a ground excitation. Two simple methods are proposed to find the optimal command input based on the Shock Response Spectrum (SRS). The first method is the simplest and can be applied to lightly damped cases, and the second method is applicable to more general problems. The second method gives almost the same results as the input shaping method. However the proposed method gives a easier and clearer control strategy.

• 동력기계공학회지
• /
• 제7권1호
• /
• pp.74-81
• /
• 2003

A system identification is to estimate the mathematical model on the base of input output data and to measure the output in the presence of adequate input for the controlled system. In the traditional system control field, most identification problems have been thought as estimating the unknown modeling parameters on the assumption that the model structures are fixed. In the system identification, it is possible to estimate the true parameter values by the adjusted least squares method in the input output case of no observed noise, and it is possible to estimate the true parameter values by the total least squares method in the input output case with the observed noise. We suggest the adjusted least squares method as a consistent estimation method in the system identification in the case where there is observed noise only in the output. In this paper the adjusted least squares method has been developed from the least squares method and the efficiency of the estimating results was confirmed by the generating data with the computer simulations.

• 한국환경과학회지
• /
• 제2권3호
• /
• pp.193-199
• /
• 1993

This study has two objectives. One is developing the runoff model for Hoe-Dong Reservoir basin located at the upstream of Su-Young River in Pusan. To develop the runoff model, basic hydrological parameters - curve number to find effective rainfall, and storage coefficient, etc. - should be estimated. In this study, the effective rainfall was calculated by the SCS method, and the storage coefficient used in the Clark watershed routing was cited from the report of P.E.B. The other is the derivation of transfer function for Hoe-Dong Reservoir basin. The linear, discrete, input-output model which contained six parameters was selected, and the parameters were estimated by the least square method and the correlation function method, respectively. Throughout this study, rainfall and flood discharge data were based on the field observation in 1981.8.22 - 8.23 (typhoon Gladys). It was observed that the Clark watershed routing regenerated the flood hydrograph of typhoon Gladys very well, and this fact showed that the estimated hydrological parameters were relatively correct. Also, the calculated hydrograph by the linear, discrete, input-output model showed good agreement with the regenerated hydrograph at Hoe-Dong Dam site, so this model can be applicable to other small urban areas. Key Words : runoff, effective rainfall, SCS method, clark watershed iou상ng, hydrological parameters, parameter estimation, least square method, correlation function method, input-output model, typhoon gladys.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.135-142
• /
• 2002

Input shaping is a method for reducing residual vibration in computer controlled machines. Vibration is eliminated by convolving a sequence of impulses, an input shaper, with a desired system command to produce a shaped input. This paper shows the shape of sensitivity curve of input shaper as impulse interval T and analysis of robustness for input shaper on the z-plane. And a method is presented for designing equivalent input shaper considering sampling time $T_s$. And then we applied equivalent input shaper to crane system.

• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.83-90
• /
• 2008

Input shaping is an efficient tool to eliminate transient and residual vibration caused by motion of mechanical systems. However, the rise time of the systems tends to increase due to the presence of input shapers. This paper is concerned with the rise time reduction when using input shaping. To this end, this paper proposes an input shaper design method for an undamped single mode vibration system using a virtual mode, which is not an actual mode but reflected in the design process. The essence of the proposed method is to design a three-impulse input shaper as if a single mode system has two modes: one actual mode and one virtual mode. The natural frequency of the virtual mode is a design parameter to change the rise time of the system. This paper discusses the performance of the proposed input shapers by simulation.

• 융합정보논문지
• /
• 제9권9호
• /
• pp.38-43
• /
• 2019

본 논문에서는 IoT 기기에 내장되는 마이크로컨트롤러의 1개 아날로그 포트를 이용해 1개의 아날로그 입력과 2개의 디지털 스위치 입력을 각각 입력받을 수 있는 방법을 제시하였다. 제시한 방법은 아날로그 입력포트의 입력전압 범위 중 상한선과 하한선을 정해 이 구간은 아날로그 입력 전압을 입력받고, 디지털 스위치들은 각각 상한선과 하한선의 경계를 초과하도록 구성하였다. 제시한 방법의 성능을 입증하기 위해 마이크로컨트롤러를 이용해 회로를 구성하고 실험하였으며, 그 결과 3종류의 입력들이 모두 1개의 아날로그 포트를 이용해 각각 감지할 수 있으므로 본래 필요했던 3개의 입력포트가 1개의 입력포트로, 즉 33%로 줄어드는 효과가 나타남을 확인하였다.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.101-109
• /
• 1998

In this paper, we implemented holographic optical memory systm which can store and reconstruct many images using new input and angular multiplexing method. In the new input method, phase infomation of input image is inputed in the recording material instead of brightness information. To do so, we represented the images, which captured with CCD camera or displayed on the computer monitor, on the liquid crystal television(LCTV) which removed polarizer/analyzer. Therefore, we can generate uniform input beam intensity regardless of the total brightness of input image, and apply the scheduled recording method. Also we can increase the intensity of input beam so reduce the recording time of input image. And reconstructedimage is acquired by transforming phase information into brightness information of image with analyzer. The incident angle of reference beam is acquired by Fourier transform of the binary phase hologram(BPH) which designed with SA algorithm on the LCTV. The proposed optical memory system is stable because the incident angle of the reference beam is controlled easy and electronically. We demonstreated optical experiment which store and reconstruct various type images in BaTiO$_{3}$ using proposed holographic memory system.

• ETRI Journal
• /
• 제26권5호
• /
• pp.505-508
• /
• 2004

We propose a new arbitration method for an input buffered switch with a buffered crossbar. In the proposed method, an exhaustive polling method is used to decrease the synchronization. Using an approximate analysis, we explain how the proposed method improves the switch performance. Also, using computer simulations, we show the proposed method outperforms the previous methods under burst traffic.