• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.456-462
• /
• 2015

The objective of this study was to develop an advanced pump technology using tornado and axial pumping principles without priming water. The developed rotor type slurry pump consisted of an electric motor, driving shaft and coupling, a rotor, an impeller, suction and discharge pipes. For the clean water test, the experimental results are presented for the discharge flowrate, electric power input and vacuum pressure with the rotor design parameters as a function of the motor rpm. The slurry discharge characteristics with the solid concentration of the cement slurry was performed. As the rotor diameter and height increase, the discharge flowrate and electric power input increase while the vacuum pressure in the suction pipe decreases. The rotor thickness had no significant effect on the discharge flowrate and electric power input. Slurries with more than 18 % solid concentration, which is the development factor, can be pumped.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.3
• /
• pp.339-348
• /
• 1996

Physicochemical and sensory characteristics of Korean traditional alcoholic beverages, such as Kwahaju, Sokokju, Baikhaju, Samhaeju and Hosanchun were investigated during fermentation with the difference of input step and treatment of rice and Nuruk (Korean-style bran koji). pH values in all treatments were similar to be ranged $3.1{\sim}3.2$, but acidity of the treatment brewed without seed mash was $1.5{\sim}2$ times higher than that of the treatment brewed with seed mash. The concentration of alcohol in all treatments increased as the concentration of the Nuruk increased. The alcohol concentrations of Samhaeju and Hosanchun ranging from 6.5% to 7.7% were higher than those of Kwahaju, Sokokju and Baikhaju ranging from 7.9% to 10.6%. Residual reducing sugar contents of Kwahaju, Sokokju and Baikhaju ranging from 4.6 g/L to 9.7 g/L were lower than those of Samhaeju and Hosanchun ranging from 14.2 g/L to 15.5 g/L. The consumed total sugar contents of Kwahaju, Sokokju and Baikhaju ranging from 125.4 g/L to 159.2 g/L were higher than those of Samhaeju and Hosanchun ranging from 111.2 g/L to 123.8 g/L, and the treatments brewed with seed mash showed more sugar consumption than the treatments brewed without seed mash. Sensory quality in the treatments brewed with seed mash was better than those of without seed mash. Concentration of Nuruk and preparation of seed mash from it were critical factors compared to input step and treatment of rice in Korean traditional alcoholic beverage brewing.

• Journal of the Korean Institute of Gas
• /
• v.4 no.2 s.10
• /
• pp.1-6
• /
• 2000

In this experiment, we made the plasma reactor which adhere needle electrode in order to treat safely an NOx which was included in the gas. Also we experimently investigated characteristics of equipment and inspected efficiency. As a reaction gas, by using mixture gas of $NO/N_2$ and $N_2/O_2$, we setted up initial NO concentration and gas flow rate was set at 2 ${\iota}$/min. As a reaction characteristics of NOx, when discharge input power was high, NO concentration decreased and when the oxygen concentration increased, the NO decomposition was easy and decomposition energy efficiency was high. Also in case that NO concentration increased, NO decomposition energy efficiency was high but decomposition rate was low. The characteristics of ozone, when discharge input power was high, ozone increased and when $NO/N_2$ concentration increased, the ozone decreased.

• Journal of the Economic Geographical Society of Korea
• /
• v.21 no.4
• /
• pp.273-288
• /
• 2018

The protected horticulture sector was evaluated as achieving the highest level of agricultural industrialization, this study examined the structural changes in the field of Korea oriental melon farming, where cultivation under structure has advanced through its long history, with the focus on intensification and concentration of agriculture. From the 1970's, the oriental melon farming labor were replaced by capital due to the increase of dependence on input industries and the decrease in labor input, thus intensification improved the productivity. Through the development, Seongju-gun of Gyeongsangbuk-do, experienced faster growth of cultivation compared to other regions, and gained a competitive edge in productivity which led to the spatial concentration as well as the concentration of farms. In this restructuring process of oriental melon farming, spatial inequality intensified throughout the agricultural development as the existing farming spaces underwent a dynamic shift.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.4
• /
• pp.321-326
• /
• 1999

This study was performed to evaluate the quality of produced compost and to analyse the change of a component during the reduction compost according to the input volume. The volume of pilot scale used in this study was about 300㎥. The pile of 2m width, 20m length and 1.2m height was constructed. Woodchip was used as bulking agent to enhance pore volume of composting bay and to control water content of food waste in starting time. Food waste was turned using a mechanical tumer twice a day. The result are as follows : In these cases of input volume of $2m^3$ and $3.5m^3$, temperature of composting pile was maintained over $60^{\circ}C$ and water content was 43.6% and 47.2%, respectively. It was proved that microorganisms activity was maintained high in each input volume. After operation of step 1 and step 2, pH and organic matter in the final compost were 6.2, 6.6 and 84.3%, 79.6%, respectively. Cation concentration such as $K_2O,$ CaO and NaCl was accumulated in the compost during the composting period. NaCl concentration in the final compost was 4.62%, 4.92%, respectively. Hence, If was recommended that this compost should be applied to others expect agricultural area or mixed with a low concentration other compost. In the steps 1, input volume of $2m^3$, heavy metal concentration of Pb, Cu, Cr, Ni. Cd were 37.82㎎/㎏, 56.87㎎/㎏, 9.8㎎/㎏. 22.21㎎/㎏ and 3.69㎎/㎏, and 44.55㎎/㎏, 95.54㎎/㎏, 12.22㎎/㎏, 24.94㎎/㎏, and 3.86㎎/㎏ in the step 2.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.250-256
• /
• 2014

In this study, we deposited and investigated ${\mu}c$-Si:H thin films prepared by Plasma Enhanced Chemical Vapor Deposition(PECVD) system. To deposition silicon thin films, we controlled $SiH_4$ gas concentration, RF input power, and heater temperature. According to the experiments, the more $SiH_4$ gas concentration increased, deposition rate also increased but crystalline property decreased at the same conditions. In the RF input power case, deposition rate and crystalline property increased together when the input power increased from 100[W] to 300[W]. If RF input power was 300[W], deposition rate has reached saturation point. In the heater temperature, deposition rate increased when heater temperature increased. Crystalline property maintained a certain level until heater temperature was $250[^{\circ}C]$. And then it was a suddenly increased. Multistep method has been proposed to improve the quality of ${\mu}c$-Si:H thin film. $SiH_4$ gas was injected with a time interval. According to the experiments, crystallite ratio improve about 20~60[%] and photo conductivity increased up to six times.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.60-67
• /
• 2010

Fire model shall be verified and validated to reliably predict the consequences of fires within its limitations. Generally the verification and validation procedures are conducted by comparison with experimental test data. This study aims to evaluate predictive capabilities of FDS in the pool fire with two rooms and the sensitivity between input parameters such as heat release rate and ventilation rate and the output values like temperature, concentration, and heat flux. The predictive capabilities of FDS will be evaluated by comparing FDS simulation results with PRISME experimental data which result from the international fire test project. The sensitivity analysis will be conducted to decide which one of input parameters affects outcomes by comparison of FDS results with ${\pm}$ 10% changes of input parameter. From this study, the FDS predictive capabilities are within 20% error range. Heat release rate as input parameter affects most of outcomes and flow rate only has relation with concentration of oxygen and combustion products.

• Journal of Korean Society of Water and Wastewater
• /
• v.12 no.3
• /
• pp.41-47
• /
• 1998

Doam Lake is located around the pasture area and Yongpyung Resort. Because of the waste load of domestic animals, nutrient concentration of the stream is high. In this study, waste load of Doam Lake watershed is calculated, and QUAL2E model is applied to the upper part of the Songcheon to calculate the input boundary concentration of Doam Lake. And WASP5 model is applied for the water quality modeling of Doam lake. The results indicate that advanced treatment of domestic animal wastes is necessary for the lake water quality management.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.739-742
• /
• 1999

A reinforcement corrosion prediction model was proposed using the results from accelerated testing and mathematical equation from the Fick's 2nd law for chloride-induced corrosion of reinforcement in concrete. The input data included the chloride concentration, mix characteristics of concrete, and environmental conditions. This model can be used to predict the chloride concentration pertaining to corrosion time and loading age for marine concrete structures. This model can also be used to predict the service life.

• Journal of Environmental Science International
• /
• v.8 no.4
• /
• pp.533-538
• /
• 1999

Fuzzy algorithm of automatic control for dissolved oxygen(DO) concentration in the aeration tank of an activated sludge process is proposed. Among variables repirometry and air flowrate are selected as significant input factors and the relationship with DO is estimated using a multiple regression model. The DO concentration and the amount of repirometry are fuzzified and the fuzzy rule base are determined. Using the fuzzy algorithm, the change of amount of air flowrate are determined and the change of amount of DO is derived.