• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.269-269
• /
• 2023

기후 변화로 인한 강우 패턴의 변화는 도심지 방재성능 목표를 상회하는 홍수로 이어져 침수피해를 가중시키고 있다. 이로 인한 도시침수 피해를 저감하기 위하여 도시침수 예측모형 개발이 활발히 이루어지고 있으나, 대규모 관망으로 이루어진 복잡한 도심지 우수관망을 모의하기 때문에 분석속도가 느려 실시간 예측 적용에 한계점이 있다. 도시침수 분석에 가장 많이 활용되는 대표적인 모형인 SWMM(Storm Water Management Model)은 복잡한 관망을 비교적 빠르고 정확히 해석할 수 있어 유용하지만, 이 또한 대도심의 우수관망 모의 시 많은 시간이 소요되며, 관망 정밀도 기준이 정의되어 있지 않아 분석에 어려움이 있다. 이러한 문제점을 해결하기 위하여 본 연구에서는 관망 간소화 기법(유역면적의 밀도, 관거 직경, 관로의 길이 등)을 적용하고, 이에 따른 주요 지선과 간선의 수위 변화와 침수흔적도를 비교하여 분석결과의 정확성을 담보하는 관망 간소화 수준을 파악하고 도시침수 분석 시 적정 간소화 기준과 자동 간소화 방안을 제시하고자 한다. 도시침수 분석 시 우수관망 자동 간소화를 위하여 Python을 활용한 코드를 작성하였으며, SWMM의 .inp 파일을 읽어들여 Dataframe형태로 저장한 후 분석을 위한 데이터 가공, 간소화 기준에 따른 분류, 간소화 대상 수리·수문인자 연산, 인접 간선에 연결, 간소화된 .inp파일 저장의 총 6단계로 구성하였다. 연구 대상지역은 도림천 유역으로 설정하였으며, 초기자료는 맨홀 30,469, 관거 32,443, 소유역 30,586개로 이루어져 있으며, 모의 시간은 약 2시간 30분이 소요되었다. 유역면적 100x100 미만을 대상으로 수행 시 맨홀 9,965, 관거 10,464, 소유역 9,240개로 관거의 복잡도가 약 1/3 감소하였으며, 모의 시간은 약 43분으로 기존대비 약 72% 단축되는 것으로 나타났다. 실제 침수가 발생한 주요지점들을 비교한 결과 R² 0.85 ~ 0.92로 예측모형의 정확도에 큰 영향을 끼치지 않는 것으로 나타났다. 도시침수모형 최적 간소화를 통해 모형의 복잡성을 줄이고, 계산량을 줄여 모형의 수행시간을 단축시킬 수 있으며, 불필요한 우수관망을 제거하거나 병합함으로써, 모형의 예측력 향상과 분석과 해석에 효율적으로 사용될 수 있을 것으로 기대한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.10
• /
• pp.16-24
• /
• 2002

In this paper, we fabricated heterojunction phototransistors(HPT's) with optically transparent ITO emitter contacts. Heterojunction transistors(HBT's) having the same device layout were fabricated to compare with HPT's. The model parameters of the devices were extracted and compared. Emitter contact resistance(RE) of the HPT was about 6.4$\Omega$, which was very similar to that of HBT and the other DC model parameters of the Inp/InGaAs HPT showed the similarities to those of the HIBT.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.222-229
• /
• 2003

InP crystal is an increasingly important semiconductor material in the application of long-wave optoelectronic and high frequency devices. The equilibrium vapor pressure of phosphorus at the melting point of InP is so high that the synthesis process is very difficult. Liquid-encapsulated Czochralski (LEC) pulling from the melt at high pressure is a generally favored technique to grow InP single crystals. This technique involves two steps: the synthesis of polycrystalline powder and the growth of single crystal from the melt at high pressure. This article reviewed the latest development in the preparation of InP crystal and the evaluation on the crystal quality.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.4
• /
• pp.63-70
• /
• 2010

This study introduce a architectural design process by the changes of sustainable design guidelines in public project. First of all, this study examines existing integrated design process studies performed by Rhee & U.B.C. Also, this study examines sustainable guidelines which demanded by public building projects. Then, this study introduces sustainable design process using existing sustainable design process, and shows that how to operate and proceed integrated design to satisfy the sustainable guidelines in practice. The results of this study are as follows. (1) Since 2007, sustainable design guidelines of bidding projects have been highlighted. (2) In public buildings, energy saving is very important issue. Especially energy certification demands 1st degree(under $300kWh/m^2{\cdot}yr$). (3) Inp ractice, integrated design team performed sustainable design using the sustainable design process to improve sustainable in public buildings.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.298-303
• /
• 2000

Principles of residual stress measurements by neutron diffraction and the residual stress instrument installed at 30MWt HANARO reactor in KAERI are considered. In-depth residual stress distribution was measured in aluminum VAMAS round robin sample and welded stainless steel plate, which showed high ability of the instrument for the stress measurements in components.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.6
• /
• pp.293-297
• /
• 2005

Linearity is an important property of optical devices for analog communications. In this paper, we study the 3rd-order interrnodulation distortion (IMD3) of an Inp/InGaAsP multiple-quantum-well (MQW) traveling-wave type electroabsorption modulator (TW-EAM). We observe abnormal notches in the IMD3 results those were different from notches by general transfer curve of electroabsorption modulators (EAMs). We analyze the phenomena through absorption coefficients according to wavelengths and bias voltages to verify appearance of the abnormal notchs, where it can be known to result from Stark-shift and broadening. We propose the method to enhance linearity of MQW-EAMs by using these effects.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.6
• /
• pp.106-110
• /
• 1997

The binding energies of the ground state of both the heavy-hole and light-hole excitons in a GaAs(In\ulcornerGa\ulcornerAs) quantum well sandwiched between two semi-infinite Al\ulcornerGa\ulcornerAs(InP) layers are calculated as a function of well width in the presence of an arbitray magnetic field. A variational approach is followed using very simple trial wave function. The applied magnetic field is assumed to be parallel to the axis of growth and the binding energies are calculated for a finite value of the height of the potential barrier. The exciton binding energies for a given value of the magnetic field are found to be increased than their values in a zero magnetic field due to the compression of their wave functions within the well with the applied magnetic field.

• Journal of Ship and Ocean Technology
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2003

Stiffened plates are among the most popular structural elements for marine structures like ships or offshore platforms. Many researchers have performed and reported the results of structural tests on stiffened plates in the open literature. However, the behaviour of stiffened plates in post-ultimate regime has not been fully reported. This paper reports the results of twenty-one axial compression tests including the initial imperfections and material properties of the test models. In aiming to investigate the post-ultimate behaviour of stiffened panels, the axial shortenings were increased up to far beyond the ultimate state. The results obtained from these tests can be utilized in substantiating design formulae in predicting the post-ultimate behaviour of stiffened plates.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.354-357
• /
• 2021

Software vulnerabilities are becoming more and more increasing, their role is to harm the computer systems of companies, governmental organizations and agencies. The main objective of this paper is to propose a method that will cluster future software vulnerabilities that may spread. This method is developed by combining the Multiple Correspondence Analysis (MCA), the Elbow procedure and the Kmeans Algorithm. A simulation was done on a dataset of 15713 observations. This simulation allowed us to identify families of future vulnerabilities. This model was evaluated using the silhouette index.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.326-336
• /
• 1997

Four ice nucleation-active bacteria (INA-bacteria), Pseudomonas syringae, Xanthomonas campestris, Escherichia coli JM109/pEIN229 and Gluconobacter oxydans/pKIN230, were treated with heat, pressure and gamma-irradiation to compare viability and their ice nucleation activity (INA) after sterilization. Gamma-irradiated INA-bacteria showed the least decrease in T90 value (the temperature at which the 90% of drops are frozen). According to cumulative INA spectra, gamma-irradiated INA-bacteria showed little decrease in class A ice nuclei $(nucleate\;H_{2}O\;at\;higher\;than\;-5^{\circ}C)$, pressurized INA-bacteria showed more than 90% decrease in class A ice nuclei, and heat-treated INA-bacteria barely showed class A ice nuclei. Differential scanning calorimetry (DSC) was used to examine the effect of INA-bacteria on the thermophysical properties of water at freezing temperature. Freezing peaks were appeared at about $11{\sim}15^{\circ}C$ higher on thermograms and enthalpies of phase change were decreased for the water containing INA-bacteria compared with the pure water, while melting peaks were not shifted. INA measured by DSC method were significantly correlated with INA measured by drop freezing method $(R^{2}>0.993,\;p<0.0001)$, indicating that DSC can be used as a new, simple and precise method for measuring INA.